• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.224-229
• /
• 2016

Recently, polymeric micro-fluidic biochips with numerous micro patterns on the surface were fabricated by injection molding for realizing low-cost mass production of devices. To evaluate the effects of process parameters on large-scale micro-structure replication, a $50{\times}50mm^2$ tool insert with surface structures having a patterns of trapezoidal shapes (height: $30{\mu}m$) was employed. During injection molding, PMMA was used; packing phase parameters and mold temperature were investigated. The replicated surface textures were quantitatively characterized by confocal laser microscopy with 10-nm resolution. The degree of replication at low mold temperatures was found to be higher than that at high mold temperature at the beginning of the packing stage. Thereafter, the degree of replication increased to a greater extent at higher mold temperatures; application of higher mold temperatures improved the degree of replication.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.19-26
• /
• 2014

Through Silicon Via (TSV) technology is the shortest interconnection technology which is compared with conventional wire bonding interconnection technology. Recently, this technology has been also noticed for the miniaturization of electronic devices, multi-functional and high performance. The short interconnection length of TSV achieve can implement a high density and power efficiency. Among the TSV technology, TSV filling process is important technology because the cost of TSV technology is depended on the filling process time and reliability. Various filling methods have been developed like as Cu electroplating method, molten solder insert method and Ti/W deposition method. In this paper, various TSV filling methods were introduced and each filling materials were discussed.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1821-1824
• /
• 2008

A novel in-mold packaging process has been developed to manufacture devices with closed channels. In this unified process, fabrication of open channels and forming the rigid cover on top of them are sequentially integrated in the same mold. The entire process is comprised of two phases. In the first phase, the open channels are fabricated under an exquisitely controlled temperature and pressure using the conventional micro injection molding technology. In the second phase, the closed channels are fabricated by conducting the injection molding process using the molded structure with the open channels as a mold insert. As a result, the in-mold technology can eliminate the bonding processes such as heating, ultrasonic or chemical processes for cohesion between the channel and the cover, which have been required in conventional methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.79-83
• /
• 2014

In this paper, SAW devices are fabricated using various IDT shape(Single/Double) to check an effect of the IDT on SAW device. And based on theory of a particle velocity moved by SAW and IDT, a particle velocity is measured and calculated. Depend on insert power, a particle velocity using Single-IDT SAW device is about two times bigger than Double-IDT SAW device and it's almost same with a theoretical different.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1571-1576
• /
• 2018

Recently, the attractive changes of mobile device are a improvement of the computing performance, dramatic improvement of storage capacity, constant connection to the internet, and sophisticated development of display technology. As a result, database applications utilizing mobile devices are emerging. These applications include databases for mobile servers, databases for edge computing, and fog computing. Therefore, it is important to pay attention to the current mobile database and pay attention to whether it has suitable performance for the applications. In this paper, the most common mobile database, SQLite3 is selected and experimented to test and understand the update performance and characteristics. The results of experiment are compared with the one of Oracle database at the same condition to evaluate the experiment. As a result, Insert Performance of SQLite3 has a lot of points to be improved and Update performance is very good. Especially, the performance of Range Query is excellent.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.81-91
• /
• 2012

As the recent development of the ubiquitous computing environment, u-GIS is being highlighted as the core technology of the ubiquitous computing environment, and thereby, studies on spatio-temporal data are being actively conducted. In this u-GIS environment, it is still difficult for existing mobile devices to efficiently manage the massive spatio-temporal data of u-GIS that are increasing day by day. Therefore, this paper develops a spatio-temporal query processing system for mobile devices in order to solve the problem. The system provides various spatio-temporal operators to insert/delete/update/search spatio-temporal data and supports a query optimization function that uses a spatio-temporal index for the flash memory and a spatio-temporal histogram for guaranteeing query execution speed. Lastly, by applying the spatio-temporal query processing system developed in this paper to the virtual scenario, this paper has proved that the system can be utilized in various application fields necessary to process spatio-temporal data in the mobile environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.226-226
• /
• 2016

PHOLED devices which have the structure of ITO/HAT-CN(5nm)/NPB(50nm)/EML(30nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) are fabricated to investigate the green emission profile in EML by using a gasket doping method. CBP and Ir(ppy)3 (2% wt) are co-deposited homogeneously as a background material of EML for green PHOLED, then a 5nm thickness of additionally doped layer by Ir(btp)2 (8% wt) is formed as a profiler of the green emission. The total thickness of the EML is maintained at 30nm while the distance of the profiler from the HTL/EML interface side (x) is changed in 5nm steps from 0nm to 25nm. As shown in Fig. 1, the green (513nm) peak from Ir(ppy)3 is not observed when Ir(btp)2 is also doped homogeneously because Ir(ppy)3 works as an gasket dopant of the Ir(btp)2 :CBP system. Therefore, in this experment, Ir(btp)2 can be used as a profiler of the green emission in CBP:Ir(ppy)3 system. The emission spectra from the PHOLED devices with different x are shown in Fig. 2. In this gasket doping system, stronger red peak means more energy transfer from green to red dopant or higher exciton density by green dopant. To find the green emission profile, the external quantum efficiency (EQE) at 3mA/cm2 for red peaks are calculated. More green light emission at near EML/HBL interface than that of HTL/EML is observed (insert of Fig. 2). This means that the higher exciton density at near EML/HBL interface in homogeneously doped CBP with Ir(ppy)3. As shown in Fig. 3, excitons can be quenched easily to HTL(NPB) because the T1 level of HTL(2.5eV) is relatively lower than that of EML(2.6eV). On the other hand, the T1 level of HBL(2.7eV) is higher than that of EML.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.3
• /
• pp.35-47
• /
• 1992

Hydrogel coated ring shaped ocular inserts (containing the antibiotic, tylosin tartrate) were used in an evaluation of the effectiveness of polymeric ocular drug release devices for treating infectious bovine keratoconjunctivitis. The in vivo experiments represent the first experiments using hydrogel ocular inserts containing an antibiotic for treating infectious bovine keratoconjunctivitis. In the infection tests, ten calves. were challenged with $2.4{\times}10^8{\sim}1.6{\times}10^9$ Moraxella bovis (a bacterium) colonies per eye following two ten minute ultraviolet radiation eye preconditioning exposures. Ninety five percent of the eyes (19 of 20 eyes) were successfully infected by this method. All infected eyes were monitored for the presence of the bacteria quantitiatively, and clinical observations were made for 14 days. The test was performed by three consecutive steps: 1) inoculation with 2 ultraviolet (UV) radiations, 2) growth of bacterial colonies and 3) treatment with medicated ring-shaped devices. The first. bacteriological measurements after 2 UV exposures were performed at day 3 of the tests. At day 7 after inoculation of both eyes of a calf with M. bovis, a medicated or a non-medicated ring-shaped device was inserted into each eye of a calf. The eye receiving the non-medicated ring was taken as a control for comparison with the eye that received a medicated ring. During the next 7 day period following a medicated ring insertion, the number of bacteria in the treated eyes dropped dramatically to negligible levels (0 to 30 colony forming units/swab), while the control eyes which received a non-medicated ring still exhibited a relatively high number of bacteria ($10^3\;to\;10^6$ colony forming units/swab). The number of bacteria was significantly reduced by the antibiotic released from the medicated ocular insert.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.10
• /
• pp.2544-2560
• /
• 2013

As a cornerstone of the next generation air traffic management (ATM), automatic dependent surveillance-broadcast (ADS-B) system can provide continual broadcast of aircraft position, identity, velocity and other messages over unencrypted data links to generate a common situational awareness picture for ATM. However, since ADS-B messages are unauthenticated, it is easy to insert fake aircrafts into the system via spoofing or insertion of false messages. Unfortunately, the authentication for ADS-B messages has not yet been well studied. In this paper, we propose an efficient broadcast authentication scheme with batch verification for ADS-B messages which employs an identity-based signature (IBS). Security analysis indicates that our scheme can achieve integrity and authenticity of ADS-B messages, batch verification, and resilience to key leakage. Performance evaluation demonstrates that our scheme is computationally efficient for the typical avionics devices with limited resources, and it has low communication overhead well suitable for low-bandwidth ADS-B data link.

• Journal of Korea Multimedia Society
• /
• v.12 no.6
• /
• pp.815-823
• /
• 2009

Most of existing watermarking schemes insert and extract a watermark, focusing on the visual conservation of an original image. However, existing watermarking schemes could be difficult for a watermark detection in case of various distortion caused by display-capture devices. Therefore, we propose a new display-capture based mobile watermarking scheme. The proposed watermarking scheme is a new concept for embedding a watermark, which uses the generated image instead of a given original image. For effective watermark decoding, we also present a method for detecting the background image whose error bit can not be corrected because of various heavy distortion and for avoiding it from the decoding process. For this scheme, we adopt distortion coefficients of camera calibration when we separate a background image from a captured image. For finding available correction bits of ECC through the decoding process, we capture 30,000 images and then calculate the separation ratio of a background image and the average error bits per an image. As experimental result, the separation ratio of a background image is about 96.5% in 30,000 captured image. And the false alarm ratio shows about $5.18{\times}10^{-4}$ in the separated background image. And also we can confirm the availability of real-time processing because the mean execution time is about 82ms per an image for capturing and decoding.