• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.366-369
• /
• 1991

A nonlinear controller based on feedback linearization method is proposed for an electromagnetic suspension system. After exactly linearizing the system with nonlinear feedback, linear control technique is applied. Modeling of stagger typed magnet is introduced and controlled for not only levitation, but guidance. By the feedback linearization, the nonlinear, MIMO system is linearized and decoupled, so we can use linear control law. The simulation of this system control skim is demonstrated. Robustness properties of the proposed controller with respect to the load variations and external disturbance is also analyzed for a multi input multi output system. In this properties, the boundary of variation is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.93-98
• /
• 1989

This paper describes the application of the recently developed feedback linearization technique to designing a new Command to Line-of-Sight (CLOS) guidance law. We show that the CLOS guidance problem can be formulated as a tracking problem. Then, using the feedback input-output linearization technique, we find a new 3dimensional CLOS guidance law that can assure zero miss distance for a randomly maneuvering target. It sheds light on the feedforward acceleration compensation terms used in the conventional CLOS guidance laws to improve the performance. To illustrate further the significance of our result, simulation results are given.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.23-30
• /
• 2009

This paper addresses how to make a formation of multiple unmanned aerial vehicles (UAVs) using only the relative range information. Since the relative range can easily be measured by an on-board range sensor like the laser range finder, the proposed method does not require any expensive and heavy wireless communication system to share the navigation information of each vehicle. Based on the two-dimensional (2-D) nonlinear equations of motion, we propose a nonlinear formation controller using the typical input-output feedback linearization method. The performance of the proposed formation controller is verified by various numerical simulations.

• 대한전기학회논문지
• /
• 제39권7호
• /
• pp.729-739
• /
• 1990

This paper deals with the fault detection problem in uncertain linear/non-linear systems having both undermodelling and noise. A robust fault detection method is presented which accounts for the effects of noise, model mismatch and nonlinearities. The basic idea is to embed the unmodelled dynamics in a stochastic process and to use the nominal model with a predetermined fixed denominator. This allows the input /output relationship to be represented as a linear function of the system parameters and also facilitate the quatification of the effect of noise, model mismatch and linearization errors on parameter estimation by the Bayesian method. Comparisons are made via simulations with traditional fault detection methods which do not account for model mismatch or linearization errors. The new method suggested in this paper is shown to have a marked improvement over traditional methods on a number of simulations, which is a consequence of the fact that the new method explicitly for the effects of undermodelling and linearization errors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.597-600
• /
• 1997

In this paper, the authors propose a new method for linearizing a nonlinear dynamical system by use of polynomial compensation. In this method, an M-sequence is applied to the nonlinear system and the crosscorrelation function between the input and the output gives us every crosssections of Volterra kernels of the nonlinear system up to 3rd order. We construct a polynomial compensation function from comparison between lst order Volterra kernel and high order kernels. The polynomial compensation function is, in this case, of third order whose coefficients are variable depending on the amplitude of the input signal. Once we can get compensation function of nonlinear system, we can construct a linearization scheme of the nonlinear system. That is. the effect of second and third order Volterra kernels are subtracted from the output, thus we obtain a sort of linearized output. The authors applied this method to a saturation-type nonlinear system by simulation, and the results show good agreement with the theoretical considerations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.110-110
• /
• 2001

By the state transformation including independent outputs functions, a nonlinear process model can be decomposed into two subsystems; the one(design model) is described in output variables as new states and used for control system synthesis and the other(disturbance model) is described in the original unavailable states and its couplings with the design model are treated as uncertain time-varying parameters in the design model. Its existence with respect to the design model is ignored. So, the design model is and uncertain time-variant system. Control synthesis based on a reduced design model is a combined form of a time-variant input-output linearization with parameter estimation. The parameter estimation is also based on the design model and it gives the parameter estimates such that the estimated outputs follow the actual outputs in a specified way. The disturbances form disturbance model and as well all the other uncertainties affecting the outputs will be reflected into the estimated parameters used in the linearizing control law.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.72-81
• /
• 2017

We propose a switching control scheme for the control of a ball and beam system. It was reported in [4] that a ball and beam system is a nonlinear system which has an ill-defined relative degree. So, the traditional control approaches have been mostly either Jacobian-based control or approximate input-output linearized control in nature. In this paper, motivated by [7], we combine these two traditional control approaches and operate each controller via a pre-designed switching logic so that the improved control result can be obtained without any excessive use of control input. Switching algorithm is developed based on both analysis and actual experimental observation. We verify the effectiveness of our proposed controller via actual experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.334-336
• /
• 1995

An adaptive feedback linearization technique of a PM synchronous motor with specified output dynamic performance is proposed. The adaptive parameter estimation is achieved by a model reference adaptive technique where the stator resistance and flux linkage can be estimated with the current dynamic model and the state observer. Using these estimated parameters, the linearizing control inputs are calculated and a nonlinear coupled model of a PM synchronous motor is input-output linearized. The resultant model has the load torque disturbance. To get ti perfect decoupled model, the load torque is estimated. The adaptation laws are derived by the hyperstability theory and positivity concept. The robustness of the proposed control scheme will be proven through the computer simulations.

• 한국ITS학회 논문지
• /
• 제7권2호
• /
• pp.62-69
• /
• 2008

본 논문에서는 구동단의 IMD 특성과 최종단의 IMD 특성을 조절하여 선형성을 개선하는 방법에 대하여 제안을 하였다. WCDMA 4FA의 입력 신호를 사용하였을 때 평균 전력 50W에서 약 -48dBc@5MHz offset의 ACLR 특성을 얻었다. 제안된 역위상화 선형화 기법은 추가적인 선형회로 없이 구동 증폭단을 이용하여 전치왜곡 효과를 얻을 수 있었다. 이러한 점은 기존 analog predistortion 방식과 feedforward 방식의 단점을 보완하였음에 큰 의미를 가진다.

• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.955-959
• /
• 2011

In this paper, we assume that an output sensor of a ball and beam system is coupled with AC measurement noise. We propose an output feedback controller for a ball and beam system under measurement noise of feedback sensor. Measurement noise makes feedback signals distorted, and results in performance degradation or even system failure. Therefore, we need to design a robust controller to accommodate the possible measurement noise in the feedback information. Our controller is equipped with a gain-scaling factor to minimize the effect of measurement noise in output feedback information. We give an analysis of the controlled system and illustrate the improved control performance via simulation and experiment for a ball and beam system.