• 무역학회지
• /
• 제46권1호
• /
• pp.83-111
• /
• 2021

This paper conducts a Structural Dcomposition Analysis on the structure of factors contributing to the output growth of Korean Maritime and Port Industry during year 2000~ year 2017. Some of results are as follows. The output growth rates of the industry (yearly average 4.3%) was far lower than the average growth rates of Service as well as of Manufacturing Industries (yearly average 9% and 6.8%, respectively) due to the lower output growth of Maritime Industry. Among the growth contributing factors, change in domestic demand for final goods is the first contributing factor, and then change in technology, change in export and import substitution for intermediate goods are followed in order, but import substitution for final goods decreased its output. However, in each respective sub-periods of pre-global financial crisis and post-global financial crisis, change in the export, especially change in the export of Maritime Industry is the dominant determinant of output change in the Maritime and Port Industry in opposite ways. In the periods of the former the increase in the export of Maritime Industry overwhelmingly led the output growth of the Maritime and Port industry, but in the periods of the latter the decrease in its export was the culprit of lower output growth of the industry. On the other hand, among all industries of service and manufacturing sectors, Wholesale and Retail industry is the leading industry in contributing to the output growth of the Maritime and Port Industry, and Transportation Equipment industry is the leading industry among all manufacturing industries.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.20-25
• /
• 2009

The maximum likelihood detection with QR decomposition and M-algorithm (QRM-MLD) has been presented as a suboptimum multiple-input multiple-output (MIMO) detection scheme which can provide almost the same performance as the optimum maximum likelihood (ML) MIMO detection scheme but with the reduced complexity. However, due to the lack of parallelism and the regularity in the decoding structure, the conventional QRM-MLD which uses the tree-structure still has very high complexity for the very large scale integration (VLSI) implementation. In this paper, we modify the tree-structure of conventional QRM-MLD into trellis-structure in order to obtain high operational parallelism and regularity and then apply the Viterbi algorithm to the QRM-MLD to ease the burden of the VLSI implementation.We show from our selected numerical examples that, by using the QRM-MLD with our proposed trellis-structure, we can reduce the complexity significantly compared to the tree-structure based QRM-MLD while the performance degradation of our proposed scheme is negligible.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.481-482
• /
• 2007

This paper demonstrates OFDM with adaptive modulation applied to Multiple-Input Multiple-Output (MIMO) systems. We apply an optimization algorithm to obtain a bit and power allocation for each subcarrier assuming instantaneous channel knowledge. The analysis and simulation is considered in two stages. The first stage involves the application of a variable-rate variable-power MQAM technique for a Single-Input Single-Output(SISO) OFDM system. This is compared with the performance of fixed OFDM transmission where a constant rate is applied to each subcarrier. The second stage applies adaptive modulation to a general MIMO system by making use of the Singular Value Decomposition to separate the MIMO channel into parallel subchannels. For a two-input antenna, two-output antenna system, the performance is compared with the performance of a system using selection diversity at the transmitter and maximal ratio combining at the receiver.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.6-14
• /
• 2011

This paper presents a high-speed QR decomposition architecture for the multi-input-multi-output (MIMO) receiver based on Givens rotation. Under fast-varying channel, since the inverse matrix calculation has to be performed frequently in MIMO receiver, a high performance and low latency QR decomposition module is highly required. The proposed QR decomposition architecture is composed of Sign-Select Lookahead (SSL) coordinate rotation digital computer (CORDIC). In the SSL-CORDIC, the sign bits, which are computed ahead to select which direction to rotate, are used to select one of the last iteration results, therefore, the data dependencies on the previous iterations are efficiently removed. Our proposed QR decomposition module is implemented using TSMC 0.25 ${\mu}M$ CMOS process. Experimental results show that the proposed QR architecture achieves 34.83% speed-up over the Compact CORDIC based architecture for the 4 ${\times}$ 4 matrix decomposition.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.90-96
• /
• 2005

This paper presents hardware scheme of fuzzy inference engine, based on α-level set decomposition of fuzzy sets for fuzzy control of DC servo system. We propose a method which is directly converted to PWM actuating signal by a one body of fuzzy inference and defuzzification. The influence of quantity α-levels on input/output characteristics of fuzzy controller and output response of DC servo system is investigated. It is concluded that quantity α-cut 4 give a sufficient result for fuzzy control performance of DC servo system. The experimental results shows that the proposed hardware method is effective for practical applications of DC servo system.

• 실천공학교육논문지
• /
• 제16권3_spc호
• /
• pp.259-265
• /
• 2024

대학 학부생들의 SW융합 역량을 향상하기 위해서는, 관련 강좌의 개발과 함께 학부생들의 코드 설계 역량을 평가하는 방법이 연구되어야 한다. 기존 연구에서는 코드 결과물에 대해 정성적인 평가방법과 정량적인 상대평가방법이 있었으며, 정량적인 상대평가방법에서는 문제분해깊이 수, 함수재사용 회수와 함수 개수를 측정하여 평가하였다. 본 연구에서는 기존 연구에서 제시되지 않은 평가방법으로서, 코드 설계 시 입력과 출력 정보종류의 수를 제시하는 문제를 이용한 평가방법을 제안하였다. 본 논문에서 제안한 평가 문제들은 입력 정보 종류의 수와 출력 정보 종류의 수를 3개까지 적용하였다. 이를 통해 5가지 코드설계 평가문제를 제시하고 코드설계 점수를 정량적으로 산출하는 방법을 제안하였다. 제안한 평가방법을 적용한 강좌를 통해 100명 학생 응답자들의 코드들을 수집하고 분석하였다. 결과 분석을 통해, 문제분해깊이 수는 입력 정보의 종류 개수에 비례하고, 함수 재사용 회수는 출력 정보의 종류 개수에 비례하며, 함수 개수는 입력과 출력 정보의 종류 총개수에 비례하는 상관성을 나타내었다. 마지막으로 100명 응답자의 평가 점수 분포를 분석하여, 5가지 입출력 정보 조건 평가문제에 따른 코드설계 평가 방법이 유효함을 설명하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.55-60
• /
• 1986

Conditions for achieving noninteraction in nonlinear multivariable systems via the decomposition of state space are well established. The main contribution of this paper is to present a Standard Decomposed System (SDS). The SDS is similar to the decomposed system of Isidorl, Krener, Gori-Giorgi, and Monaco but has a finer structure. The finer structure parallels the one used by Gilbert for linear systems. A weaker form of noninteraction, based on input-output behaviour, is decoupling. Some connections between decomposition and decoupling are also established.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1762-1765
• /
• 1997

Some ill-conditioned processes are very sensitive to small element-wise uncertainties arising in classical element-by-element model identifications. For such processes, accurate identification of simgular values and right singular vectors are more important than theose of the elements themselves. Singular values and right singular vectors can be found by iteraive identification methods which implement the input and output transformations iteratively. Methods based on SVD decomposition, QR decomposition and LU decomposition are proposed and compared with the Kuong and Mac Gregor's method. Convergence proofs are given. These SVD and QR mehtods use normal matrices for the transformations which cannot be calculated analytically in general and so they are hoard to apply to dynamic processes, whereas the LU method used simple analyitc transformations and can be directly applied to dynamic processes.

• 한국통신학회논문지
• /
• 제37A권10호
• /
• pp.841-849
• /
• 2012

본 논문은 max-log 근사화 하에서 연판정 최대 우도 (soft-output maximum-likelihood, soft-ML) 성능을 달성하기 위한 저복잡도 연판정 다중 안테나 (soft-output multiple-input multiple-output, soft-MIMO) 검출 알고리즘을 제안한다. 제안된 알고리즘은 병렬 트리-탐색 (parallel tree-search, PTS)을 기반으로 하며, 정렬 순서를 변경한 정렬된 QR 분해 (sorted-QR decomposition, SQRD)를 채널 순서화를 위해 적용한다. 비트별 로그-우도비 (log-likelihood ratio, LLR)를 계산하는 과정에서 발생할 수 있는 공집합 문제 (empty-set problem)는 탐색 레벨별로 추가적인 노드들을 삽입함으로써 해결한다. 제안된 노드 삽입 기법에서는 선택된 노드와 반대 비트 값을 가지면서 가장 가까운 노드만 삽입되기 때문에, 연산 복잡도 측면에서 상당히 효율적이다. 제안된 알고리즘의 연산 복잡도는 기존 알고리즘 대비 약 37-74% 수준이며, $4{\times}4$ 시스템에 대한 시뮬레이션 결과, 제안된 알고리즘은 soft-ML와 비교하여 0.1 dB 미만의 성능 저하를 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.699-704
• /
• 2004

Empirical mode decomposition(EMD) method has been recently proposed to analyze non-linear and non-stationary data. This method allows the decomposition of one-dimensional signals into intrinsic mode functions(IMFs) and is used to calculate a meaningful multi-component instantaneous frequency. In this paper, it is assumed that each mode of damped vibration signal could be well separated in the form of IMF by EMD. In this case, we can have a new powerful method to calculate natural frequencies and dampings from damped vibration signal which usually has multiple modes. This proposed method has been verified by both simulation and experiment. The result by EMD method which has used only output vibration data is almost identical to the result by FRF method which has used both input and output data, thereby proving usefulness and accuracy of the proposed method.