• 품질경영학회지
• /
• 제37권3호
• /
• pp.123-139
• /
• 2009

This study examines the relative efficiency of 34 local public medical centers in Korea. In order to concretely grasp the causes of inefficiency and suggest improvement solutions, the desirable set point was established based on the actual value which needs to be improved. As a result of analysis, we determined that output must be increased while input is held constant in order to improve effectiveness through the actual value and set point. Efficiency cannot be achieved if input is augmented solely to increase output. Also, to increase output, the medical centers need to improve their quality without increasing any input for customer visits and hospitalizations. Further, in order to strategically promote effectiveness and efficiency of local public medical centers, these medical centers must focus on input resource and patient interchange through the mutual cooperation with local private hospitals and university medical centers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.36-39
• /
• 2003

The push pull forward converter is a very suitable circuit for low output voltage, high output current applications with a wide input voltage range. All the magnetic components (output inductor, transformer, input filter) can be integrated into a single core. The integrated magnetics can reduce the number of the magnetic components. Developed the push pull forward converter rating are of 36 $\~$72V input and 3.3V/30A output. In this converter, the efficiency was measured by $76.4\%$ at full load and 82.95$\%$ at full load. The maximum efficiency is up to 83.$\%$ at 200kHz switching frequency, l1A output.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1232-1234
• /
• 2003

The push pull forward converter is a very suitable circuit for low output voltage, high output current applications with a wide input voltage range. This converter can be miniaturized by integrate magnetic components such as the output inductor, the transformer and the input inductor. We considered of the efficiency for the push pull forward converter. Developed the push pull forward converter rating are of $36{\sim}72V$ input and 3.3V/30A output. In this converter. the efficiency was measured by 76.4% at full load and 82.95% at half load. The maximum efficiency is up to 83.% at 200kHz, 11A output.

• 통합자연과학논문집
• /
• 제8권4호
• /
• pp.293-304
• /
• 2015

This study examined the factors which have influence on the welfare facilities for the elderly and analyzes their efficiency. It investigated theoretical studies and preceding studies and divided the efficiency evaluation factors into input and output factors. Input factors included budget, the number of workers and clients and facility area and output factors were operation management, the number of clients, profitability and welfare for the elderly. To sum up the analysis results of evaluation factors of welfare facilities for the elderly, the analysis of relative importance of input showed that budget was most important. As a result of analyzing the relative importance among detailed items, balance sheet and professional manpower were highest. Input factors by facility types showed that the budget for utility facilities and living facilities were highest. In output factors, utility facilities and living facilities were highest in management systematization and welfare for the elderly, respectively. In efficiency evaluation, utility facilities for the elderly showed 100% of efficiency in CCR and BCC models. In welfare facilities for the elderly, while CCR model showed 100% of efficiency in facility types A, C, D, and F, the efficiency was low in facility B (79.89%), E (77.14%), and G (80.72%). In BCC model, facility E was low as 78.69%. In efficiency comparison between utility facilities and living facilities for the elderly welfare, the efficiency of utility facilities for the elderly welfare was higher. Therefore, this study investigated the efficiency of welfare facilities for the elderly as its main purpose and presented policy suggestions based on the research results as the alternative.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.9-11
• /
• 2002

We improve the free-space optical interconnection efficiency by using circular aperture computer-generated hologram (CGH). In free-space optical interconnection system using CGH, the single CGH is composed of sub-CGHs, which can change the direction of input beams to desired output positions, by Fourier transform. Each sub-CGH is rectangular shape, so the input beams through each sub-CGH are transformed to sinc functions in output plane. The side lobes of each sinc function are superimposed in output plane and they result in detection error in output plane, so the detection efficiency is low. We use the circular shaped sub-CGHs in order to reduce the side lobe value in output plane instead of rectangular shaped sub-CGHs. The each input beam is transformed to first-order Bessel functions through circular shaped sub-CGHs in output plane. The side lobes of first-order Bessel functions us low values compared with side lobes of sinc function, so we can improve the detection efficiency in output plane. We use binary phase modulated CGH, and confirm this improvement results by simulation.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.57-65
• /
• 2022

DEA(data envelopment analysis) is a technique for evaluation of relative efficiency of decision making units (DMUs) that have multiple input and output. A DEA model measures the efficiency of a DMU by the relative position of the DMU's input and output in the production possibility set defined by the input and output of the DMUs being compared. In this paper, we proposed several DEA models measuring the multi-period efficiency of a DMU. First, we defined the input and output data that make a production possibility set as the spanning set. We proposed several spanning sets containing input and output of entire periods for measuring the multi-period efficiency of a DMU. We defined the production possibility sets with the proposed spanning sets and gave DEA models under the production possibility sets. Some models measure the efficiency score of each period of a DMU and others measure the integrated efficiency score of the DMU over the entire period. For the test, we applied the models to the sample data set from a long term university student training project. The results show that the suggested models may have the better discrimination power than CCR based results while the ranking of DMUs is not different.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.97-99
• /
• 2007

This paper presents a fuzzy logical control method to implement an on-line optimum efficiency control for Permanent Magnet Synchronous Motor. This method real-timely adjusts the output voltage of the inverter system to achieve the optimum running efficiency of the whole system. At first, the input power is calculated during the steady state in the process of efficiency optimizing. To exactly estimate the steady state of the system, this section needs check up the speed setting on timely. The second section is to calculate input power of dc-bus. The exact measurement of the voltage and current is the vital point to acquire the input power. The third section is the fuzzy logic control unit, which is the key of the whole drive system. Based on the change of input power of dc-bus and output voltage, the variable of output voltage is gained by the fuzzy logical unit. With the on-line optimizing. the whole system call fulfill the minimum input power of dc-bus on the running state. The experimental result proves that the system applied the adjustable V/f control method and the efficiency-optimizing unit possesses optimum efficiency, and it is a better choice for simple variable speed applications such as fans and pump.

• 경영과정보연구
• /
• 제5권
• /
• pp.81-101
• /
• 2000

The purpose of this comparative study is to compare and evaluate venture business of electronic and communication industry by Data Envelopment Analysis(DEA). DEA is a linear programming-based technique that converts multiple input and output measures into a single comprehensive measures of productive efficiency. In this paper, the CCR model and trend analysis model are used to examine the efficiency of 18 venture business. Input variables are number of employees. raw-material costs and production capability and output variables are real production, sales revenues and net income after taxes. DEA approach broad information like as efficiency level of each Decision Making Unit(DMU), reference group of efficiency improvement and trends of efficiency shift. Finally, the correlation of input and output variables are examined to examine the relationship among variables.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.10-17
• /
• 2015

A quasi-constant on-time controlled buck front end in combined discontinuous conduction mode and boundary conduction mode is proposed to improve power factor (PF).When instantaneous AC input voltage is lower than the output bus voltage per period, the buck converter turns into buck-boost converter with the addition of a level comparator to compare input voltage and output voltage. The gate drive voltage is provided by an additional oscillator during distortion time to eliminate the cross-over distortion of the input current. This high PF comes from the avoidance of the input current distortion, thereby enabling energy to be delivered constantly. This paper presents a series analysis of controlling techniques and efficiency, PF, and total harmonic distortion. A comparison in terms of efficiency and PF between the proposed converter and a previous work is performed. The specifications of the converter include the following: input AC voltage is from 90V to 264V, output DC voltage is 80V, and output power is 94W.This converter can achieve PF of 98.74% and efficiency of 97.21% in 220V AC input voltage process.

• 유통과학연구
• /
• 제16권5호
• /
• pp.91-101
• /
• 2018

Purpose - This study compares the management efficiency of retailers in China, Korea and other global countries. China's retail industry is experiencing a recession. In order to strengthen the competitiveness of retailers, it is necessary to manage the efficiency. Therefore, we analyzed the management efficiency of Chinese retailers as well as Korea and global retailers who are competing with Chinese retailers. Research design, data, and methodology - The DEA(Data Envelopment Analysis) carried out for evaluating the relative efficiency of multiple DMUs (decision making units) with homogeneity. Data were collected from the American Retail Trade Association (2017). In those distributors' data, 5 of China and 5 of Korea and 10 of other global countries' analyzed. CCR and BCC analysis were performed to determine the cause of the inefficiency of DMUs by measuring the technical efficiency, pure technology efficiency and scale efficiency. Result - Among the 20 retail distributors, Costco, Kroger (Global), Eland World, BGF(Korea) are operating efficiently. Chinese retailers are operating inefficiently. Retailers' CRS status means the growth rate of input is equal to the growth rate of output. In the case of DRS status, the ratio of output to input variable is much smaller. In order to improve inefficiency, reducing input variables can be a solution. For the firms in IRS status, the rate of increase in output is relative greater than the input. That means efficiency is good condition. The analysis result shows that most retailers are showing DRS status especially Chinese retailers. Scale efficiency is a major cause of inefficiency rather than pure technology efficiency. It is recommended for ineffective retailers to reduce inputs to become efficient retailers. Otherwise, retrain existing employees or introducing advanced technologies to increase the output. Conclusions - Most of Chinese retailers are operating inefficiently which caused by the excessive investment in the inputs. On the other hand, Other global retailers are analyzed to be efficient by DEA. In this study, benchmarking targets of some retailers' suggested to improve the management efficiency especially in inputs.