• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.77-86
• /
• 2004

Since world container throughput continues to grow, the main issues facing decision-makers at port container terminals are how to expand the existing container terminals and construct new container terminals. Simulations can be used in the decision making process tools due to its ease and ability to reflect the real world system. The object-oriented approach provides for both reusability and modularity that best fits these requirements. In this paper, the object-oriented approach to modeling and simulating general container terminals is presented. Simulation tools based on Visual C++ provide a user-friendly input and output environment through the use of an object class-library. This paper also presents the case study of a simulation of a real container terminal in Pusan, Korea.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.74-75
• /
• 2000

WDM(wavelength-division multiplexing) 광통신 네트웍을 이루는 핵심기술중의 하나는 ADF(Add-drop Filter)의 구현에 있다. 광섬유격자와 여러형태의 구조를 이용한 ADF들 중에서도 비대칭 결합기와 광섬유 격자를 이용한 구조는, 간섭계 구조가 아니기 때문에 제작이 용이하고 보다 안정된 특성을 보일 것으로 기대되어 많은 관심을 갖게 하고 있다$^{(1)}$ . 비대칭 결합기 구조의 경우, 두 광도파로의 코어반경이나 굴절율 분포가 서로 다르기 때문에, 일반적으로 광파의 결합이 일어나지 않는다. 그러나 브래그 격자의 반사조건을 만족하는 파장성분의 경우 입력단(input port)에서 드롭단(drop port)으로 반사되어 나오고, 그 외의 파장성분은 출력단(Output port)으로 나오게 되어 드롭 기능을 수행하게 된다. 비슷한 원리로 add port에서 출력단으로의 add 기능도 수행된다. 본 논문에서는 연산자 분리 시영역 모델$^{(2)}$ 을 이용하여 비대칭구조에서의 파장응답 특성을 해석하였다. 또한 최적화를 위한 조건을 알아 보고, 소자 설계에 필요한 파라미터를 정의하여 최적설계에 필요한 파라미터를 구하였다. (중략)

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.12
• /
• pp.1245-1254
• /
• 2001

For a R410A-rolling piston type rotary compressor model which was modified by reducing the cylinder height and shaft eccentricity from R22-compressor version, numerical simulation has been carried out and simulation results have been found to be compared fairly well with those of measurements. EER of this first version of R410A compressor was 4.8% lower than that of R22 compressor. To improve the performance of the R410A compressor model, parametric study on the design parameters related to the discharge port system has been performed by using the numerical simulation program, and optimum conditions for the highest EER have been obtained with the aid of Taguchi method. With the optimized discharge port configuration, EER has been improved by 1.7%.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.771-778
• /
• 2007

A container terminal gate is not only an entrance of containers, but also the first input point of containers' information. Therefore, to achieve the accuracy of container information, there are various containers' numbers recognition methods used. Gate productivity can significantly vary depending upon those recognition methods. Recently, RFID which is one of the u-IT businesses run by the Korean government is under consideration for application to the gate as an automatic system. If RFID is used, it is expected to have both the qualitative benefits through avoiding defects of other systems and the quantitative benefits by improving productivity. Hence, this study aims to provide some insight on the benefits of RFID, and to compare productivity of the existing gate system with the RFID gate system based on computer simulation.

• Journal of Korea Port Economic Association
• /
• v.40 no.1
• /
• pp.87-118
• /
• 2024

Coastal ports play an essential role in developing a country and a city. Port efficiency is an important factor affecting port trade, and the importance of port efficiency for port performance has been recognized in previous literature. DEA (Data Envelopment Analysis) and SFA (Stochastic Frontier Analysis) are widely used in this field of research. However, these two methods are limited in selecting input and output variables. In addition, the literature studies on Chinese coastal ports mainly focus on the study of port clusters in local areas, which lacks a holistic approach and generally lacks up-to-date data. Therefore, to fill the gap in this area of research, this paper introduces a model combining principal component analysis and data envelopment analysis to analyze the operational efficiency of the top 17 coastal ports in China in terms of throughput based on the most recent data available in 2021. This paper identifies container throughput as the output variable, and 13 second indicators are selected as input variables from four primary indicators: land, capital, labor, and infrastructure. Four principal components were selected from 13 second indicators using PCA.After that, DEA (BBC) and DEA (CCR) were used to analyze the 17 ports, among which five were Shanghai, Ningbo-Zhoushan, Guangzhou, Xiamen, and Dongguan, respectively, DEA efficient, and the remaining 12 ports were non-DEA efficient. Finally, improvement directions for each port are derived, and brief suggestions are made. This paper provides some reference value for developing and constructing coastal ports in China.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1062-1065
• /
• 2002

We demonstrate the MMIC(monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 ㎓ local oscillator signals from 14.5 ㎓ input signals. These devices were designed and fabricated by using the MMIC integration process of 0.1 $\mu\textrm{m}$ gate-length PHEMTs (pseudomorphic high electron mobility transistors). The measurements showed S$\_$11/ of -9.2 dB at 14.5 ㎓, S/sub22/ of -18.6 dB at 29 ㎓ and a minimum conversion loss of 18.2 dB at 14.5 ㎓ with an input power of 6 dBm. The fundamental signal of 14.5㎓ was suppressed below 15.2 dBc compared with the second harmonic signal at the output port, and the isolation characteristics of the fundamental signal between the input and the output port were maintained above 30 dB in the frequency range of 10.5 ㎓ to 18.5 ㎓.

• Journal of Korea Port Economic Association
• /
• v.22 no.2
• /
• pp.35-60
• /
• 2006

This paper uses input-output techniques to analyze the impacts of the coastal and inland water transportation (CIWT) upon the Korean economy between 1990 and 2000. The impacts were identified by means of backward and forward linkages effects, production inducing and import-inducing effects, and commodity prices repercussion effects of the coastal and inland water transportation. The data of this study come from The Bank of Korea databases for Input-Output Structure of the Korean economy. The major findings in this study can, among others, be summarized: that the power of dispersion(=backward linkage effect) and the degree of sensitivity (=forward linkage effect) of CIWT are higher than those of the deep sea transportation sector and that it has higher production-inducing effect than the average of total industries, while it has lower import-inducing effect than the average of total industries.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.103-124
• /
• 2006

This paper is concerned with a comparative study on the economic effects upon the Korean economy by transport mode, ie road, rail, air, and coastal and inland water transportation between 1990 and 2000, using input-output analysis. The economic effects consist of backward and forward linkage effects, production inducing and import-inducing effects. The data employed for this study come from the Bank of Korea database for Input-Output structure of the Korean economy. The major findings in this study are, among others:(1) the power of dispersion(=backward linkage effect) of coastal and inland water transportation sector is the highest among the four transport sectors, while road cargo transport mode showed the highest the degree of sensitivity (=forward linkage effect); (2) rail cargo transport recorded the highest production inducing effects; and (3) air transport mode achieved the highest ranking in the import-inducing effects.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.1-5
• /
• 1999

An ATM switch is the basic component of an ATM network, and its functioning is to switch incoming cells arriving at an input port to the output port associated with an appropriate virtual path. In case of an ATM switch with buffer sharing scheme, the performance analysis is very difficult due to the interactions between the address queues. In this paper, the influences of the degree of traffic burstiness and some traffic routing properties are investigated by using the simulation. Also, some cell access strategies including priority access and cell dropping are compared in terms of cell loss probability.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.15-23
• /
• 1998

In this paper, distributed mixer is studied at microwave frequency. The circuit of distributed mixer composed of gate 1,2, drain transmission lines, matching circuits in input and output terminal, DGFET's. For impedance matching of input and output port at higher frequency, image impedance concept is introduced. In distributed mixer, a DGFET's impedances are absorbed by artificial transmission line, this type of mixer can get a very broadband characteristics compared to that of current systems. A RF/LO signal is applied to each gate input port, and are excited the drain transmission line through transcondutance of the DGFET's. The output signals from each drain port of DGFET's added in same phases. We designed and frabricated the distributed mixer, and a conversion gain, noise figure, bandwidth, LO/RF isolation of the mixer are shown through computer simulation and experimentation.