• 한국통신학회논문지
• /
• 제30권10A호
• /
• pp.958-964
• /
• 2005

본 논문은 Sub-harmonic 혼합기 구조에서 국부발진기(Local Oscillator) 포트에 넓은 대역에 걸쳐서 변환손실을 최적화 하는 정합회로를 적용하였다. 이러한 Sub-harmonic 혼합기를 이용하여 점대점 시스템용 하향 변환기를 설계 및 제작하였다. 제안된 구조의 Sub-harmonic 혼합기는 국부발진기입력전력이 12 dBm일 때 최적으로 11.8 dB의 변환손실을 얻었으며, 격리특성은 40dB이하의 특성을 나타내었다. 전체 하향 변환기의 특성으로 IF 출력 평탄도는 2dB이하의 특성을 나타내었으며, 전체 잡음지수로는 5.9dB이하의 특성을 얻었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.147-152
• /
• 2008

This paper has been fabricated the two different type of variable attenuators using a characteristics of a 3 dB directional coupler and pin diodes. One was not analyzed using the conventional even-odd modes but used simple two-port techniques. The resulting scattering parameters described operation characteristics for the general case where the terminating impedances are equal and unequal. After analyzing resistor role of the ${\pi}$ type fixed attenuator. this paper used a pin diode instead of a resistor. The variable attenuators were fabricated using pin diodes for current-controlled attenuation on the coupled ports of a 3 dB branch-line coupler and ${\pi}$ type fixed attenuator. The realized variable attenuators have more than 33 dB attenuation ranges at 2.1 GHz. and the input and output reflection coefficients are less than -13 dB. These results could be applied to mobile communication systems. It can be varied gain of the power amplifier according to change a outdoor environmental temperature and improved linearity.

• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.60-70
• /
• 1995

As a Basic study to implement a wide-band photonic switching sysetm, we proposed a scheme of free-space-division-multiplexed photonic switching based on a holographic interconnectio method and carried out simple experiments on it. First, we recorded holgraphic interconnection element array for nonblocking optical interconnections. Just a single stage of the array realizes full optical interconnections between NN${\times}$NN input prots and NN${\times}$NN output ports in 3-D space. Next, in reading of the array for optical internnections, we showed that the zeroth-order diffacted beam could be eliminated in the output port by introducing a right angle prism. The elimination of the zeroth-order diffracted beam reduces optical noise in the output ports and provides conveniences of interconnection control in our scheme. Finally, from the experiments on ON-OFF switching of the optical interconnection paths one by one using a spatial (display of the liquid crystal telecision), we showed the feasibility of photonic wsitching based on the holographic interconnection method. We also estimated approximately the maximum interconnectio scale that can be realized without difficulty with current optical devices.

• International Journal of Contents
• /
• 제2권1호
• /
• pp.29-33
• /
• 2006

The common-source low noise amplifier(LNA) with inductive degeneration using a genetic algorithm is designed and tested for a down converter in an industrial, scientific and medical (ISM) band application and a wireless broadband internet service (WiBro). The genetic algorithm optimizes the reflection coefficients to be well matched the input and output ports between multistage transistor amplifiers, and it generates low voltage standing wave ratio as well as gain flatness of the amplifier. The stability and the gain flatness of the LNA have been improved by combining the matching circuits and the series feedback microstrip lines with inductive degeneration at common-source port. In the frequency range of ISM band and WiBro application operating at $2.3GHz{\sim}2.5GHz$, the measured power gain and maximum voltage standing wave ratio (VSWR) of the LNA are $41{\pm}0.5dB$ and 1.3, and the noise figure of the LNA is lower than 0.85dB. The above results are agreed well with the theoretical values of the amplifiers.

• 한국정보통신학회논문지
• /
• 제9권6호
• /
• pp.1277-1281
• /
• 2005

현재 통신시스템에서는 FPGA를 사용하여 여러 가지 로직을 구현하고 있다. 본 논문에서는 데이터 전달 특성을 분석하고 신호의 노이즈와 데이터 손실을 방지하기 위하여 10층의 PCB(Printed Circuit Board)를 만들었다. FPGA에 클럭과 64bit의 데이터를 동기 시켜 전송선로의 길이의 변화와 입력된 클럭의 주파수 변화에 따른 최대 안정된 데이터 전달속도와 전송선로의 길이를 알아보았다. 제작된 PCB보드에서 FPGA의 출력 핀에서 출력포트 사이의 전송선로 길이는 13cm이며 확장된 테스트용 전송선로 보드의 길이는 30cm, 60cm, 120cm이다. 그러므로 전송선로의 길이를 13cm, 43cm, 73cm, 133cm간격으로 측정하였으며, 데이터 전송특성에 대한 클럭 주파수는 100MHz, 50MHz, 100MHz, 125MHz, 150MHz로 나누어 측정하였다. 데이터 전달 특성에서 125Mbps까지는 불가능 하지만 전송선로의 길이가 30cm일 경우 최대 100Mbps까지 안정하게 데이터를 전달할 수 있었다.

• 한국항해학회지
• /
• 제19권2호
• /
• pp.107-113
• /
• 1995

Since the most of the mal-functions in the industrial equipments controlled by processors have been occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commision(IEC) prepare the dummy signal to test the immunity level of the equipments controlled by processors and recommend it for the measuring. In this paper, the defined dummy EFT signal by IEC are analyzed by the spectrum analyzer in the frequency domain and studied the developed countermeasuring parts. The new developed parts are consist of the feedthrough capacitors ( $C_y$ type ) in the input and materials with high permeaility which was wound or inserted in the second layer of the Power Cable in order to increase Common Mode inductance. And it is compared inserted Permalloy to material with high permeability increasing Common Mode inductance. We could gotten a excellent insertion loss on the wide band against EFT signal. Especially, we confirm that countermeasuring Power Cable have been an excellent dynamic characteristics in computer system above the 3.6Kv. This new parts could be effectively used for industrial, MIL, and medical equipments to reduce a mal-functions on the site. Furthermore, these parts also have a good characteristics for EMI countermeasuring over the 60MHz up to several GHz band, they are also expected to be used for all kind of EMS test with IEC801-2, 3, 5 and 6 on the power distributed line.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.183-190
• /
• 2010

This paper selects length of berth, area of yard, unloading capacity and number of berth as the input indexes, and cargo turnover as output index to research the source of TFP(Total Factor Productivity) growth of 23 main ports in Korea. The major conclusions are as follows. The TFP of the trade ports in Korea is at the fluctuating stage, but it generally displays a rising trend, and it’s growth originate from the growth of technical efficiency. The Growth rates of TFP of trade ports in the different areas are different, and the sources of growth are also different, but the changing trends are basically the same. Four major factors to the increase of TFP are following: competition between ports, reform of property system, harbor-hinterland economic and international trade, modeling, imitation and innovation in management, technology and system.

• 대한전자공학회논문지TC
• /
• 제38권1호
• /
• pp.20-26
• /
• 2001

고출력 증폭기의 선형화 방법 중 Predistorter 방식은 크기가 작고, 전력 효율이 좋아 고출력 증폭기 선형화에 많이 이용된다. 본 논문에서는 새로운 측정 방법을 이용하여 고출력 증폭기에서 발생하는 혼변조 신호와 Predistorter의 혼변조 신호가 결합하는 경우에 Predistorter의 혼변조 신호의 세기와 위상 변화에 따른 고출력 증폭기에서의 혼변조 신호 감쇠량을 실험적 방법을 통해 추정하였다. 결과적으로 동일한 혼변조 신호, 결합 조건(세기와 위상)의 Predistorter의 선형화 방법은 서로 다른 경로의 신호 결함을 하는 Feedforward 선형화 방법보다 5dB 정도의 혼변조 신호 감쇠량이 낮음을 확인하였다.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.252-257
• /
• 2011

본 논문에서는 설계 방법이 단순하면서 통과 대역의 대역폭 조절이 독립적으로 가능한 소형의 이중 대역 대역 통과 필터를 제안하였다. 각각의 통과 대역은 서로 다른 두 개의 이중 모드 공진기를 이용하여 독립적으로 설계하였다. 제안된 이중 대역 대역 통과 필터는 세 개의 전송 영점을 갖는다. 두 개의 전송 영점은 각각의 이중 모드 공진기에서 발생하며, 입출력 선로 간의 결합 효과에 의해 추가적으로 하나의 전송 영점이 발생한다. 제안된 이중 대역 대역 통과 필터 설계 방법을 이용하여 2.4/5.7 GHz WLAN에 동작하는 이중 대역 대역 통과 필터를 설계 및 제작하였다.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.