• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.515-522
• /
• 2005

This paper presents a method for effectively modeling inlay/onlay prostheses restoring a tooth that are partially destroyed. An inlay/onlay is composed of internal surface adhering to an abutment, and external surface revealed to the outside sight. Internal surfaces are modeled using Minkowski sum expanding the grinded surface parts of abutments so that the internal surfaces can adhere to the abutments with closer contact. In modeling external surfaces, we exploit 3D mesh deformation techniques: DMFFD(direct manipulation free-form deformation)[19] and MWD(multiple wires deformation)[17] with three kinds of informations: standard teeth models, mesh data obtained by scanning a plaster cast of a patient's tooth, FGP(functionally guided plane) measuring the occlusion of the patients's teeth. The standard teeth models are used for building up the basic shapes of external surfaces, while the plaster fast and FGP data are used for reflecting the unique properties of adjacent md occlusal surfaces of the patients's teeth, which are slightly different to each other but very important for correct functioning. With these informations as input data, the adjacent and occlusal surfaces are automatically generated as mesh data using the techniques of DMFFD and m, respectively. Our method was implemented so that inlay/onlay prostheses fan be designed more accurately by visualizing the generated mesh models with requirements by dentists.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.227-234
• /
• 2020

Under consideration of construction waste recycling, candidate secondary products applicable for the civil and construction areas can be reliably employed based on the recycling cost analysis. For the validation purpose, probability-based cost analyses were performed to estimate recycling cost profit considering uncertainties. When recycling construction wastes, the costs at each stage are fully dependent on target products to be adopted. To achieve commercialization of each product, its quality has to be improved with economic efficiency through accurate evaluation of input costs. Based on the probabilistic recycling cost analysis, the cost benefit for target products was estimated with waste classification cost, transportation cost to recycling treatment facilities and production cost. All necessary information on the cost analysis were collected from literature, disclosure, and existing recycling companies. In addition, a cost difference between recycled and non-recycled events was made. As a result, a probability-based recycling cost estimate for candidate secondary products was herein presented.

• Journal of the Korean association of regional geographers
• /
• v.12 no.3
• /
• pp.364-381
• /
• 2006

Strategies for regional development has been implemented by facilitating the cultural industry since the mid 1990s. The government of Gyeongbuk attempted to establish the cluster of cultural industries and to enhance the capability of cultural industries. However, infrastructure of the industries is still weak. The most cultural industries are small-sized enterprises and are in low value-added production link in the value chain. This research examines the situation of cultural industries and then to recommend the direction of cluster of cultural industries in Gyeongbuk. The cluster of cultural industries in Gyeongbuk needs to be decentralized integration. Cultural industries in Gyeongbuk are found in dispersed regions with own cultural and industrial characteristics. The hub of cluster of cultural industries should be formulated to promote network among cultural industrial complexes in dispersed regions; thus, the hub is able to provide knowledge and information for the cultural industrial firms in Gyeongbuk. The supporting center as the hub of cluster has to input more energy to establish the on-line and off-line network among firms, and between firms and innovation agencies such as universities, cultural industrial organizations, and local governments. The cultural industrial cluster should be linked with IT cluster in Gumi and cluster of Daegu cultural industries to upgrade the value chain of cultural industries.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.228-235
• /
• 2008

Terror for airplane, airport and passengers of the problems is being threat over the world. and since 9.11 terror of 2001 year, many countries have endeavored to prevent terror and have manipulate airport security part as important field. Especially, The U.S.A made Transportation security Administration in Homeland security adminstration and strongly execute for policies related anti-terror. many countries over the world enforce airport and airplane security facilities with science-technology contents. and with security exploitation for the passengers and freight security inspection level enforcement, many countries also make effort to interupt aviation terror threat. In this process, in the center of developed countries that need science-technology contents adaption, much budget and personals are invested and exploited a security inspection instrument and complimented of many facilities As a result, according to the development of science-technology, prevention of Terror have much developed. The contents using intelligence-communication technology inevitably needed on the goal of terror prevention and safty. From simple monitoring for the people who come in and out airport to boarding process and inspection for the freight, security inspection process for the passengers, bio information input, confirmation, of the level that there is no cases of adaption of contents, The reality have generalized of using contents. The study is going to research contents application situation.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.58-62
• /
• 2010

This paper presents the effects of RF performance parameters on the Galileo receiver design via simulation after reviewing the requirements of the Galileo receiver structure. At first, we considered the general requirements, structure and characteristics of the Galileo system. Then we designed the Galileo receiver focused on performance requirement of 16 dB C/N which is equal to 15 % Error Vector Magnitude(EVM) by using Advanced Design System(ADS) simulation program. In order to verify the function of Automatic Gain Control(AGC)), we measured the IF output power level by changing the input power level at the front - end of the receiver. We analyzed the performance degradation due to phase noise variations of Local Oscillator(LO) in the Galileo receiver through EVM when the minimum sensitivity level of -127 dBm is applied at the receiver. We also analyzed the performance degradation according to variable Analog-to-Digital Converter(ADC) bits within the Dynamic range, -92 ~ -139 dBm, which has been defined by gain range (-2.5 ~ +42.5 dB) in the AGC operation. The results clearly show that the performance of the Galileo receiver can be improved by increasing ADC bits and reducing Phase Noise of LO.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.47-56
• /
• 2020

Decline of pine forests happens in Korea due to various disturbances such as insect pests, forest fires and extreme climate, which may further continue with ongoing climate change. For conserving and reestablishing pine forests, understanding climate-induced future shifts of pine tree distribution is a critical concern. This study predicts future geographical distribution of Pinus densiflora, using Maximum Entropy Model (MaxEnt). Input data of the model are locations of pine tree stands and their environmental variables such as climate were prepared for the model inputs. Alternative future projections for P. densiflora distribution were conducted with RCP 4.5 and RCP 8.5 climate change scenarios. As results, the future distribution of P. densiflora steadily decreased under both scenarios. In the case of RCP 8.5, the areal reductions amounted to 11.1% and 18.7% in 2050s and 2070s, respectively. In 2070s, P. densiflora mainly remained in Kangwon and Gyeongsang Provinces. Changes in temperature seasonality and warming winter temperature contributed primarily for the decline of P. densiflora., in which altitude also exerted a critical role in determining its future distribution geographic vulnerability. The results of this study highlighted the temporal and spatial contexts of P. densiflora decline in Korea that provides useful ecological information for developing sound management practices of pine forests.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.357-368
• /
• 2009

Mobile IP storage has been proposed to overcome storage limitation in the flash memory and hard disks. It provides almost capacity-free space for mobile devices over wireless IP networks. However, battery lifetime of the mobile devices is reduced rapidly because of power consumption with continuous use of a WLAN device when multimedia contents are being streamed through the mobile IP storage. This paper proposes an energy-efficient WLAN device power control technique for streaming multimedia contents with the mobile IP storage. The proposed technique consists of a prefetch buffer input/output module, a WLAN device power control module, and a reconfigurable prefetch buffer module. Besides, it adaptively determines the size of the prefetch buffer according to a quality of the multimedia contents, and it dynamically controls the power mode of the WLAN device on the basis of power on-off operations while streaming the multimedia contents. We evaluate the performance of the proposed technique on a PXA270-based mobile device that employs the embedded linux 2.6.11, Intel iSCSI reference codes, and a WLAN device. Extensive experiments reveal that the proposed technique can save the energy consumption of the WLAN device up to 8.5 times with QVGA multimedia contents, as compared with no power control.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.25-36
• /
• 2008

In this paper, we present a robust hand recognition approach to sudden illumination changes. The proposed approach constructs a background model with respect to hue and hue gradient in HSI color space and extracts a foreground hand region from an input image using the background subtraction method. Eighteen features are defined for a hand pose and multi-class SVM(Support Vector Machine) approach is applied to learn and classify hand poses based on eighteen features. The proposed approach robustly extracts the contour of a hand with variations in illumination by applying the hue gradient into the background subtraction. A hand pose is defined by two Eigen values which are normalized by the size of OBB(Object-Oriented Bounding Box), and sixteen feature values which represent the number of hand contour points included in each subrange of OBB. We compared the RGB-based background subtraction, hue-based background subtraction and the proposed approach with sudden illumination changes and proved the robustness of the proposed approach. In the experiment, we built a hand pose training model from 2,700 sample hand images of six subjects which represent nine numerical numbers from one to nine. Our implementation result shows 92.6% of successful recognition rate for 1,620 hand images with various lighting condition using the training model.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.593-606
• /
• 2016

Computer simulation is widely used in a variety of computational science and engineering fields, including computational fluid dynamics, nano physics, computational chemistry, structural dynamics, and computer-aided optimal design, to simulate the behavior of a system. As the demand for the accuracy and complexity of the simulation grows, however, the cost of executing the simulation is rapidly increasing. It, therefore, is very important to lower the total execution time of the simulation especially when that simulation makes a huge number of repetitions with varying values of input parameters. In this paper we develop a simulation service system that provides the ability to predict the result of the requested simulation without actual execution for that simulation: by recording and then returning previously obtained or predicted results of that simulation. To achieve the goal of avoiding repetitive simulation, the system provides two main functionalities: (1) storing simulation-result records into database and (2) predicting from the database the result of a requested simulation using statistical machine learning techniques. In our experiments we evaluate the prediction performance of the system using real airfoil simulation result data. Our system on average showed a very low error rate at a minimum of 0.9% for a certain output variable. Using the system any user can receive the predicted outcome of her simulation promptly without actually running it, which would otherwise impose a heavy burden on computing and storage resources.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.847-854
• /
• 2001

The Web continues to grow fast rate in both a large aclae volume of traffic and the size and complexity of Web sites. Along with growth, the complexity of tasks such as Web site design Web server design and of navigating simply through a Web site have increased. An important input to these design tasks is the analysis of how a web site is being used. The is paper proposes a Page logging System(PLS) identifying reliably user sessions required in Web mining system PLS consists of Page Logger acquiring all the page accesses of the user Log processor producing user session from these data, and statements to incorporate a call to page logger applet. Proposed PLS abbreviates several preprocessing tasks which spends a log of time and efforts that must be performed in Web mining systems. In particular, it simplifies the complexity of transaction identification phase through acquiring directly the amount of time a user stays on a page. Also PLS solves local cache hits and proxy IPs that create problems with identifying user sessions from Web sever log.