• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.769-777
• /
• 2012

In this paper, a new development in the time optimal control theory in sliding mode control systems for multi-quadrant buck converters with a variable load is presented. In general, the closed-loop time optimal control system is applied to multi-quadrant buck converters for output regulation, so that an optimal switching surface is obtained. Moreover, an adjusted optimal sliding mode controller is suggested which adjusts the controller parameters to give an optimal switching surface. In addition, a description of the transient response of the closed-loop system is proposed and used to damp any output or input disturbances in minimum time. Numerical simulations and experimental results are employed to demonstrate that the output regulation time and transient performances of dc/dc converters using the proposed technique are improved effectively when compared to the classical sliding mode control method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.11
• /
• pp.599-609
• /
• 2000

The new design methodology of a hybrid fuzzy controller by means of the genetic algorithms is presented. First, a hybrid fuzzy controller(HFC) related to the optimal estimation of control parameters is proposed. The control input for the system in the HFC combined PID controller with fuzzy controller is a convex combination of the FLC's output and PID's output by a fuzzy variable, namely, membership function of weighting coefficient. Second, an auto-tuning algorithms utilizing the simplified reasoning method and genetic algorithms is presented to automatically improve the performance of hybrid fuzzy controller. Especially, in order to auto-tune scaling factors and PID parameters of HFC using GA, three kinds of estimation modes such as basic, contraction, and expansion mode are effectively utilized. The proposed HFC is evaluated and discussed to show applicability and superiority with the and of three representative processes.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.66-73
• /
• 2015

In this paper, an architecture of a perpetual smart video device and its energy control model for the internet of things (IoT) are proposed. The smart video device consists of a processor, an image sensor, a video codec, and a network controller. In the proposed energy control model, energy consumed by image sensing, video encoding, and transmission and energy harvested by solar panels are defined as an input and an output of a battery, an energy buffer. Frame rate, quantization parameter, and operating frequency of processor are defined as the energy control parameters, and these parameters control the input and the output energy of the energy buffer, finally control the energy left in the battery. The proposed energy control model is validated by the energy consumption measurement of the smart phone based platform for various combinations of energy control parameters, and can be used for the design of perpetual smart video device.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.1-13
• /
• 2023

This paper discusses a framework for predicting the flexural strength of prestressed and non-prestressed FRP reinforced T-shaped concrete beams using soft computing techniques. An analysis of 83 tests performed on T-beams of varying widths has been conducted for this purpose with different widths of compressive face, beam depth, compressive strength of concrete, area of prestressed and non-prestressed FRP bars, elasticity modulus of prestressed and non-prestressed FRP bars, and the ultimate tensile strength of prestressed and non-prestressed FRP bars. By analyzing the data using two soft computing techniques, named artificial neural networks (ANN) and gene expression programming (GEP), the fundamental parameters affecting the flexural performance of prestressed and non-prestressed FRP reinforced T-shaped beams were identified. The results showed that although the proposed ANN model outperformed the GEP model with higher values of R and lower error values, the closed-form equation of the GEP model can provide a simple way to predict the effect of input parameters on flexural strength as the output. The sensitivity analysis results revealed the most influential input parameters in ANN and GEP models are respectively the beam depth and elasticity modulus of FRP bars.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.5
• /
• pp.463-471
• /
• 1999

This paper presents a vector controlled induction motor is implemented by neural networks system compared with PI controller for the speed control. The design employed the training strategy with Neural Network Controller(NNC) and Neural Network Emulator(NNE) for speed. In order to update the weights of the controller First of all Emulator updates its parameters by identifying the motor input and output next it supplies the error path to the output stage of the controller using backpropagation algorithm, As Controller produces an adequate output to the system due to neural networks learning capability Vector controlled induction motor characteristics actual motor speed with based on neural network system follows the reference speed better than that of linear PI speed controller.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.12-22
• /
• 1996

A numerous designs of PI controllers have been suggested to solve out trade-off between tracing and regulating problems. We constructed the PI controller system with two-degree-of-freedom that is more analytic and a better approach to a practical one. In the conventional H$_{2}$ design of optimal PI controllers, the cost function includes only the plant output terms due to the divergent problems. Since the platn input temr is not considered in PI controller design, occasionally, the plant input thends to be either very large or saturated. To solve the prior mentioned problems, we employed a mixed $H_2/H_{\infty}$ method that combines the H$_{2}$ design method to decide optimal parameters of PI controller and the $H_2/H_{\infty}$ design method to minimize the maximum amplitude of plant input. The calculation time of the H$_{infty}$ norm was considerably reduced by the simple scalar function obtained by the wiener-hopf factorization of non-scalar functions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.388-398
• /
• 1998

In constructing fuzzy control systems. there are many parameters such as rule base. membership functions. inference m method. defuzzification. and I/O scaling factors. To control the system in properly using fuzzy logic. we have to consider t the correlation with those parameters. This paper deals with self-tuning of fuzzy control systems. The fuzzy controller h has parameters that are input and output scaling factors to effect control output. And we propose the looklongleftarrowup table b based self-tuning fuzy controller. We propose the PMTM(Plus-Minus Tuning Method) for self tuning method, self-tuning the initial look-up table to the appropriate table by adding and subtracting the values.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.4
• /
• pp.306-311
• /
• 2008

Fuzzy regression, a nonparametric method, can be quite useful in estimating the relationships among variables where the available data are very limited and imprecise. It can also serve as a sound methodology that can be applied to a variety of management and engineering problems where variables are interacting in an uncertain, qualitative, and fuzzy way. A close examination of the fuzzy regression algorithm reveals that the resulting possibility distribution of fuzzy parameters, which makes this technique attractive in a fuzzy environment, is dependent upon an h parameter value. The h value, which is between 0 and 1, is referred to as the degree of fit of the estimated fuzzy linear model to the given data, and is subjectively selected by a decision maker (DM) as an input to the model. The selection of a proper value of h is important in fuzzy regression, because it determines the range of the posibility ditributions of the fuzzy parameters. In this paper, we discuss the interdependent relationship among the h value, membership function shape, and the spreads of fuzzy parameters in fuzzy linear regression with fuzzy input-output using shape-preserving operations.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.306-310
• /
• 2008

Fuzzy regression, a nonparametric method, can be quite useful in estimating the relationships among variables where the available data are very limited and imprecise. It can also serve as a sound methodology that can be applied to a variety of management and engineering problems where variables are interacting in an uncertain, qualitative, and fuzzy way. A close examination of the fuzzy regression algorithm reveals that the resulting possibility distribution of fuzzy parameters, which makes this technique attractive in a fuzzy environment, is dependent upon an h parameter value. The h value, which is between 0 and 1, is referred to as the degree of fit of the estimated fuzzy linear model to the given data, and is subjectively selected by a decision maker (DM) as an input to the model. The selection of a proper value of h is important in fuzzy regression, because it determines the range of the posibility ditributions of the fuzzy parameters. In this paper, we discuss the interdependent relationship among the h value, membership function shape, and the spreads of fuzzy parameters in fuzzy linear regression with fuzzy input-output using shape-preserving operations.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.76-83
• /
• 2010

The purpose of this study is to propose a method to decide near-optimal settings of the constant current fuzzy control parameters using a controlled random search. This method tries to find the near-optimal settings of the constant current fuzzy control parameters through experiments. It has an advantage of being able to carry out searches in the search domain which includes some irregular points. The method suggested in this study was used to determine the fuzzy control parameters by which the desired welding current were formed during inverter DC resistance spot welding. The output variable was the ITAE (integral of time multiplied by the absolute error). This output variable was determined according to the input variables, which are the GE, GDE, and GDU. This study described how to obtained near-optimal welding current condition over a wide search space conducting a relatively small number of experiments.