• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.43-46
• /
• 2001

We, in this paper, design the Sugeno-models fuzzy controller by using the membership function modification algorithm and ANFIS, which are clustering and learning the input-output data. The membership function modification algorithm constructs the more concrete fuzzy controller by clustering the input-output data from the fuzzy inference system. ANFIS construct the Sugeno-models fuzzy controller by learning the input-output data from the above controller. We showed that the fuzzy controller designed by our method could have the stable learning and the enhanced performance.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.10
• /
• pp.100-112
• /
• 1992

In this paper, an integrated document input/output system is developed which constructs the graphic document from a text file, converts the document into encoded facsimile data, and also recognizes printed/handwritten alphanumerics and Korean characters in a facsimile or graphic document. For an output system, we develop the method which generates bit-map patterns from the document consisting of the KSC5601 and ASCII codes. The binary graphic image, if necessary, is encoded by the G3 coding scheme for facsimile transmission. For a user friendly input system for documents consisting of alphanumerics and Korean characters obtained from a facsimile or scanner, we propose a document recognition algirithm utilizing several special features(partial projection, cross point, and distance features) and the membership function of the fuzzy set theory. In summary, we develop an integrated document input/output system and its performance is demonstrated via computer simulation.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.271-278
• /
• 2006

A new high efficiency zero-voltage and zero-current switching (ZVZCS) bidirectional DC/DC converter is proposed in this paper. The proposed converter consists of two symmetric half-bridge cells as the input and output stages. MOSFETs of input stage are turned-on in ZVS condition, and those of output stage are turned-off in ZCS condition. In addition, MOSFETs of input and output stages have low voltage stresses clamped to input and output voltage, respectively. Therefore, the proposed converter has high efficiency and high power density. The operational principles are analyzed and the advantages of the proposed converter are described. The 300W prototype of the proposed converter is implemented for 42V hybrid electric vehicle (HEV) application in order to verify the operational principles and advantages.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.310-313
• /
• 2005

This paper is concerned with the active vibration control of beam equipped with piezoceramic sensors and actuators. The single-input and single-output positive position feedback controller is considered as an active vibration controller for the beam. The proposed single-input and single-output positive position feedback controller can cope with many modes of interest by summing each positive position feedback controller designed for each mode. In this paper, theoretical formulation is first explained in detail. We discuss how to design the single-input and single-output positive position feedback controller for a target structure by considering Euler-Bemoulli beam. It is found that the theories developed in this study are capable of predicting the control system characteristics and its performance.

• 전기의세계
• /
• v.22 no.4
• /
• pp.25-29
• /
• 1973

The computation of transmittances between arbitrary input and output nodes is of particular interest in the signal flow graph theory imput. The signal flow matrix [T] can be defined by [X]=-[T][X] where [X] and [Y] are input nose and output node matrices, respectively. In this paper, the followings are discussed; 1) Reduction of nodes by reforming the signal flow matrix., 2) Solution of input-output relationships by means of Gauss-Jordan reduction method, 3) Extension of the above method to the matrix signal flow graph.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.338-340
• /
• 2001

Power factor improved for single-phase buck-converter is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.301-305
• /
• 2005

This paper introduces a novel technique to detect and isolate the failures of multiple actuators connected to a system. Failure of actuator considered in this study could be any type of erroneous input that is different from commanded one. The interaction matrix technique allows the development of input-output equations that are only influenced by one target input. These input-output equations serve as an effective toot to monitor the integrity of each actuator regardless of the status of the other actuators. The method is capable of real-time actuator failure detection and isolation under any type of input excitation. The laboratory experiment using 8-bay NASA truss structure verifies the feasibility of the proposed method.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.56-69
• /
• 2005

In this paper, it is clearly shown that the two well-known necessary and sufficient conditions mp n as generic static output feedback pole-assignment and mp + d(m+p) n+d as generic minimum d-th order dynamic output feedback pole-assignment on complex field, unbelievably, do not match up each other in strictly proper linear systems. For the analysis, a diagram analysis is newly created (which is defined by the analysis of 'convoluted rectangular/dot diagrams' constructed via node-branch conversion of the signal flow graphs of output feedback gain loops). Under this diagram analysis, it is proved that the minimum d-th order dynamic output feedback compensator for pole-assignment in m-input, p-output, n-th order systems is quantitatively decomposed into static output feedback compensator and its associated d number of arbitrary 1st order dynamic elements in augmented (m+d)-input, (p+d)-output, (n+d)-th order systems. Total configuration of the mismatched data is presented in a Table.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1655-1658
• /
• 1991

This paper considers the design and analysis of one-step ahead optimal and adaptive controllers, under the restriction that a known constraint on the input amplitude is imposed. It is assumed that the discrete-time single-input, single-output system to be controlled is linear, except for inequality constraints on the input. The objective function to be minimized is an one-step quadratic function, where polynomial weights on the input and output are included. Both the known parameter and unknown parameter (indirect adaptive controller) cases are examined.

• STI Policy Review
• /
• v.7 no.2
• /
• pp.85-105
• /
• 2016

This study compares the economic impacts among ICT sectors and derives strategic considerations for development of the ICT industry in Korea. Prior to analysis, this study classified ICT industry into four sectors: ICT equipment, components, service, and SW/system. This study conducted Input-Output Analysis on the four ICT sectors. An Input-Output Analysis is a quantitative economic technique that represents the direct and indirect interdependencies between different industries of a national economy. Features of each ICT sector were observed in the results. Within the ICT equipment sector, production is decreasing, import dependence is increasing, and employment size is very low, relative to the overall ICT industry. The component sector accounts for the over half of the output and value added of the ICT industry, but domestic production has recently declined. The subsector experienced decreasing production and increasing imports relative to the other ICT subsectors. In the service sector, output is small but its production and employment impact is very high. The fourth sector, ICT SW/system, has very low impact on production but high impact on employment. These features suggest two strategies to develop the ICT industry in Korea. First, the ICT component and service sectors should be promoted to stimulate growth of the national economy. Second, to encourage employment growth, policies should promote the ICT SW/system and service sectors.