• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.376-383
• /
• 2012

In this paper, we provide a general expression of spatial multiplexing gain (SMG) for two mutually interfering multiple-input multiple-output (MIMO) broadcast channels, referred to as MIMO-IBC, when some of user messages are made available to base stations through a common noiseless backbone line. The MIMO-IBC has two base stations and multiple users, each equipped with multiple antennas, where independent messages are transmitted over fixed channels. From the derived results, we observe the variation of the SMG with respect to the presence of a coordination as well as various antenna distributions, and compare the derived result to the SMG of the case with full cooperation among users.

• International journal of advanced smart convergence
• /
• v.7 no.3
• /
• pp.37-43
• /
• 2018

Lattice-reduction (LR) techniques have been developed for signal detection in spatial multiplexing multiple input multiple output (MIMO) systems to obtain the largest diversity gain. Thus, an LR-assisted zero-forcing (ZF) receiver can achieve the maximum diversity gain in spatial multiplexing MIMO systems. In this paper, a simplified analysis of the achievable diversity gain is presented by fitting the channel coefficients lattice-reduced by a complex Lenstra-Lenstra-$Lov{\acute{a}}z$ (LLL) algorithm into approximated Gaussian random variables. It will be shown that the maximum diversity gain corresponding to two times the number of receive antennas can be achieved by the LR-based ZF detector. In addition, the approximated bit error rate (BER) expression is also derived. Finally, the analytical BER performance is comparatively studied with the simulated results.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.1
• /
• pp.1-14
• /
• 2020

Antenna selection is a method to enhance the performance of spatial multiplexing multiple-input multiple-output (MIMO) systems, which can achieve the diversity order of the full MIMO systems. Although various selection criteria have been studied in the literature, they should be adjusted to the detection operation implemented at the receiver. In this paper, antenna selection methods that optimize the post-processing signal-to-noise ratio (SNR) and eigenvalue are considered for the lattice reduction (LR)-based receiver. To develop a complexity-efficient antenna selection algorithm, the incremental selection strategy is adopted. Moreover, for improvement of performance, an additional iterative selection method is presented in combination with an incremental strategy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.949-954
• /
• 2017

Multiple input, multiple output orthogonal frequency division multiplexing (MIMO OFDM) systems are the candidate for the future wireless communications. However, the main drawback of MIMO OFDM systems is their sensitivity to carrier frequency offset (CFO) similar to the single input, single output OFDM (SISO OFDM) systems. The demodulation of a signal with CFO causes large bit error rate and degrade the performance of a symbol synchronizer. It is important to estimate the frequency offset and minimize or eliminate its impact. In this paper, we propose a technique based on observation training symbols for estimating CFO by employing block-by-block estimation for SISO OFDM systems. The technique of SISO OFDM is extended to the MIMO OFDM systems. Simulation results show that the proposed techniques have a superior performance and better accuracy compared to the conventional techniques in the sense of mean square error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.337-344
• /
• 2011

In this paper, a multiple-input and multiple-output (MIMO) spatial multiplexing (SM) relay system is studied in a bit error rate (BER) sense, where every node is deployed with multiple antennas. In order to efficiently use the limited power resource, it is essential to optimally allocate the power to nodes and antennas. In this context, the power allocation (PA) algorithm based on minimum BER (MBER) for a MIMO SM relay system is proposed, which is derived by direct minimization of the average BER, and divided into inter-node and inter-antenna PA algorithm. The proposed scheme outperforms the conventional equal power allocation (EPA) algorithm without extra power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.876-882
• /
• 2003

The future wireless communication systems will use spatial multiplexing with Multiple Input Multiple Output(MIMO) system to take advantage of large channel capacity gains. In such systems it will be desirable to select a sub-set of available transmit or receive antennas to reduce cost and complexity. In this paper we propose a novel antenna selection schemes for MIMO systems be suitable for multipath environment. Also, we analyze the capacity and define the outage probability for a novel antenna selection schemes for MIMO systems in multipath environment.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.385-390
• /
• 2011

In this paper, various ultra-wideband (UWB) spatial multiplxing (SM) multiple input multiple output (MIMO) receivers based on a prerake diversity combining scheme are discussed and their performance is analyzed. Several UWB MIMO detection approaches such as zero forcing (ZF), minimum mean square error (MMSE), ordered successive interference cancellation (OSIC), sorted QR decomposition (SQRD), and maximum likelihood (ML) are considered in order to cope with inter-channel interference. The UWB SM systems based on transmitter-side multipath preprocessing and receiver-side MIMO detection can either boost the transmission data rate or offer significant diversity gain and improved BER performance. The error performance and complexity of linear and nonlinear detection algorithms are comparatively studied on a lognormal multipath fading channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.652-657
• /
• 2003

In this paper, Adaptive Modulation and Coding (AMC) is combined with Multiple Input Multiple Output (MIMO) multiplexing to improve the throughput performance of AMC. In addition, a system that adopts Selection Transmit Diversity (STD) in the AMC-MIMO multiplexing system is proposed. The received SNR is improved by adopting STD techniques. And it increases probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. This leads to an increased throughput of the AMC-MIMO system. STD in our simulation selects 2 transmission antennas from 4 antennas and AMC-MIMO multiplexing process operates with the selected antennas. The computer simulation is performed in flat Rayleigh fading channel. The results show that the proposed system achieves a gain of 1Mbps over the AMC-MIMO multiplexing system with the same number of antennas at 15dB SNR.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.755-764
• /
• 2017

In this paper, we design transmitter and receiver structures for a $2{\times}2$ multiple-input multiple-output (MIMO) in ATSC 3.0 systems and analyze the performance of the $2{\times}2$ MIMO system. In the ATSC 3.0 MIMO systems, spatial diversity and multiplexing gains can be obtained using the spatial demultiplexer and precoder. In this paper, we present the structures of the transmitter and receiver for ATSC 3.0 MIMO systems. Also, we present performance results of the $2{\times}2$ MIMO system through computer simulations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.6-13
• /
• 2011

Multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM) with space-time coding (STC) is a promising technology for future wireless communication systems. However, MIMO-OFDM systems are greatly impaired by large cochannel interference (CCI) from the multiple transmitters. In this paper, we propose pre-fast Fourier transform (FFT) multibeamforming based on MMSE(minimizing the mean squared error) for a MIMO-OFDM system to preserves the STC diversity and to remove the CCI. The improvement in bit error rate is investigated through computer simulation of a MIMO-OFDM system in a multipath channel with CCI.