• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.488-498
• /
• 2008

Soil and Water Assessment Tool (SWAT) model have been widely used in simulating hydrology and water quality analysis at watershed scale. The SWAT model extracts topographic feature using the Digital Elevation Model (DEM) for hydrology and pollutant generation and transportation within watershed. Use of various DEM cell size in the SWAT leads to different results in extracting topographic feature for each subwatershed. So, it is recommended that model users use very detailed spatial resolution DEM for accurate hydrology analysis and water quality simulation. However, use of high resolution DEM is sometimes difficult to obtain and not efficient because of computer processing capacity and model execution time. Thus, the SWAT Topographic Feature Extraction Error (STOPFEE) Fix module, which can extract topographic feature of high resolution DEM from low resolution and updates SWAT topographic feature automatically, was developed and evaluated in this study. The analysis of average slope vs. DEM cell size revealed that average slope of watershed increases with decrease in DEM cell size, finer resolution of DEM. This falsification of topographic feature with low resolution DEM affects soil erosion and sediment behaviors in the watershed. The annual average sediment for Soyanggang-dam watershed with DEM cell size of 20 m was compared with DEM cell size of 100 m. There was 83.8% difference in simulated sediment without STOPFEE module and 4.4% difference with STOPFEE module applied although the same model input data were used in SWAT run. For Imha-dam watershed, there was 43.4% differences without STOPFEE module and 0.3% difference with STOPFEE module. Thus, the STOPFEE topographic database for Soyanggang-dam watershed was applied for Chungju-dam watershed because its topographic features are similar to Soyanggang-dam watershed. Without the STOPFEE module, there was 98.7% difference in simulated sediment for Chungju-dam watershed for DEM cell size of both 20 m and 100 m. However there was 20.7% difference in simulated sediment with STOPFEE topographic database for Soyanggang-dam watershed. The application results of STOPFEE for three watersheds showed that the STOPFEE module developed in this study is an effective tool to extract topographic feature of high resolution DEM from low resolution DEM. With the STOPFEE module, low-capacity computer can be also used for accurate hydrology and sediment modeling for bigger size watershed with the SWAT. It is deemed that the STOPFEE module database needs to be extended for various watersheds in Korea for wide application and accurate SWAT runs with lower resolution DEM.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.31-41
• /
• 2006

The primary purpose of a TKA is to restore normal knee function Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from climbing stairs; (b) provide adequate knee joint stability. A 16-channel MyoResearch XP EMG system was used to collect the differential input surface electromyography signals VM, VL, RF, BF, ST during climbing/descending stair tests. A Peak Motion Measurement System was used to collect the kinematic and kinetic data. AKIN-COM Ill isokinetic dynamometer was used for EMG of VM, VL, RF, BF and ST during maximal voluntary contraction. I Quadriceps EMG results for the VM of the passed 1year group limb demonstrated significant less RMS EMG than that of the passed 3year group limb $60^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The VL of the passed 1year group limb also demonstrated significants less RMS EMG than that of the passed 3year group limb from $60^{\circ}-45^{\circ}$ of knee flexion(p<0.05). Similar to the VM and VL, the RF of the passed 1year group limb showed less RMS EMG than that of the passed 3year group limb from $60^{\circ}-30^{\circ}$ do knee flexion(p<0.05). Hamstring EMG results for the BF of the passed 1year group limb demonstrated less RMS EMG than that of the passed 3year group limb from $75^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The passed 1year group limb tended to have less ADD displacement(p<0.071) than that of the passed 3year group limb. There was no significant difference of the ABD displacement between the passed 1year group and the passed 3year group limbs(p<0.73). The passed 3year group used compensatory adaptation movement strategies to compensate for the strength deficit of passed 3year group limbs. The passed 3year group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. The passe 3year group limb might have an unstable knee joint in the medio-Iateral direction during the climbing/descending by showing a tendency of more ADD displacement and greater hamming co-activation EMG than the passed 1year group limbs. The TKA design was not able to help the knee joint to produce adequate knee extension moment with less quadriceps muscle effort. I think that old man needs continuous exercise for muscle strength.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.225-238
• /
• 2020

The agricultural landscape is considered an important space to provide service functions, but the reality is that environmental and ecological problems are being reported in the creation of a facility horticulture complex. Therefore, this study was conducted to contribute to sustainable agriculture by creating a more eco-friendly facility horticultural complex. The elements of planning for eco-friendly development of the facility horticultural complex were derived from literature and expert surveys. The master plan and the bird's-eye view were then applied to the Saemangeum area by applying the planning elements. After analyzing the method of selecting and deploying input elements for improving functions, it was suggested that low-flow areas, wetlands, artificial storage facilities, green spaces, and waterways should be placed in harmony with the landscape and that the building-to-land ratio should be applied at 55%. The final design was prepared by applying the ecological service function improvement plan proposed by experts. The final bird's-eye view also reflected water purification facilities, connection of wetlands to waterways, packing of pitchers, and connection of green areas. The results of the research are expected to be used as basic data for policy and budget allocation for the eco-friendly creation of horticulture facilities and contribute to sustainable agriculture by contributing to national biodiversity and environmental preservation.

• Environmental and Resource Economics Review
• /
• v.19 no.2
• /
• pp.361-382
• /
• 2010

In 2005, the Korean government decided to postpone the introduction of competition up to 2009 in the power plant service industry. Thus, the purpose of this study is to analyze the efficiency changes and the determinants of international competitiveness of Korean power plant service industry by the comparison between before and after 2006. The sample used in the estimation of efficiency is six firms III Korean power plant service sector for the period of 2003~2008. According to the results, technical efficiency before 2006 (2003~2005) is 0.865 and that after 2005 (2006~2008) is 0.947, which implies that efficiency has been improved after the delay of introduction of competition. In addition, according to the analyses based on the diamond model of Porter using survey data, demand condition has been ranked first in the determinants of international competitiveness. The second and the third important conditions are government and input factor ones. Firm's strategy/structure/competitiveness condition is the most weak condition. Therefore, it would be necessary for firms to improve this condition for competitiveness.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.743-754
• /
• 2000

Model parameters of the WASP5 applied to Saemanguem lake were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating each group of parameters by a trial-and-error procedure. Chlorophyll-a, nitrogen cycles, phosphorus cycles, BOD and DO were simulated at the complexity level 4. The Saemangeum basin divided into a number of unit sub-watershed. And a water budget model analysis with 22 years from 1975 to 1996 year was examined. In this paper, input data at upstream boundaries of model was made to determine seasonally-averaged flow rate through water budget analysis. Calibration and verification of the model were used seasonal average of water quality measurements in 1997 and 1998 years. Grouping water quality constituents and associated parameters proved to be efficient in estimating a number of model parameters. From the results of model calibration and verification, it was found that quantitative evaluations of nonpoint source for organic matters are essential.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.287-294
• /
• 2003

The purpose of this study was to develop a web-based internet program for nutritional assessment and diet management of patient having hyperlipidemia. Hyperlipidermia were classified by hypercholesterolemia and hypertriglyceridemia. The program consisted of four parts according to their functions and contents. The first part explained the metabolism of lipids and defined the hyperchotesterolemia and hypertriglyceridemia. The second part is to assess the general health status such as body weight, obesity index, basal metabolic rate and total energy requirement by the input of age, sex, height, weight and degree of activity. This part also provides the Patient with menus lists and 1 day menu suitable to his weight, activity and the status of hyperlipidemia and offers the information for food selection, snacks, convenience foods, dine-out, behavioral modification, cooking methods, food exchange lists, and information on energy and nutrients of foods and drinks, and top 20 foods classified by nutrients. The third part is designed to investigate diet history of patient, that is, to find out his inappropriate dietary habit and give him some suggestions for appropriate dietary behavior. This part also offers on-line counseling and frequently asked Questions. The fourth part is evaluating their energy and nutrients intake by comparing with recommended dietary allowance for Koreans or standardized data for patient with hyperlipidemia. In this part, it is also analyzing energy and nutrients of food consumed by food group and meals, and evaluating the status of nutrient intake. These results are finally displayed as tabular forms and graphical forms on the computer screen.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.5
• /
• pp.548-553
• /
• 2014

In order to evaluate the performance of arrow that manufactures through production process, it is used that personal experiences such as hunters who have been using bow and arrow for a long time, technicians who produces leisure and sports equipment, and experts related with this industries. Also, the intensity of arrow's impact point which obtains from repeated shooting experiments is an important indicator for evaluating the performance of arrow. There are some ongoing researches for evaluating performance of arrow using intensity of the arrow's impact point and the arrow's flying image that obtained from high-speed camera. However, the research that deals with mutual relation between distribution of the arrow's impact point and characteristics of the arrow (length, weight, spine, overlap, straightness) is not enough. Therefore, this paper suggests both the system that could describes the distribution of the arrow's impact point into numerical representation and the correlation model between characteristics of arrow and impact points. The inputs of the model are characteristics of arrow (spine, straightness). And the output is MAD (mean absolute distance) of triangular shaped coordinates that could be obtained from 3 times repeated shooting by changing knock degree 120. The input-output data is collected for learning the correlation model, and ANN (artificial neural network) is used for implementing the model.

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.43-53
• /
• 2013

The paper addresses the introduction of outsourcing of delivery service for the small service industries such as delivery based restaurant in order to increase the profit and revenue of the service company, upgrade the delivery satisfaction for the customers, and expand the welfare of the senior people through the work. The chinese restaurants are selected as model service companies, outsourcing of delivery services are suggested for those restaurants and simulation models are developed for all operation systems for them. Some of input data for the simulation are collected from the real world and others are refined through the interview with the field workers. 6 scenarios are established considering the number of deliverers and delivery charges and simulation experiments for each scenario have been done according to the 3 kind of situations of the service companies. The results show that introduction of outsourcing increases the revenue and profit of the service company, decreases the service time for the customers and increases the revenue of the delivery outsourcing company employing the senior people. So delivery outsourcing for the service industries can be considered as a good solution for the welfare problem of the senior people.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.323-331
• /
• 2017

In this paper, four types of deposition control processes such as temperature, pressure, input/output(I/O), and gas were replaced by the Internet of Things(IoT) to analyze the data load and sequence procedure before and after the application of it. Through this analysis, we designed the load balancing in the sensing area of the deposition process by creating the sequence diagram of the deposition process. In order to do this, we were modeling of the sensor I/O according to the arrival process and derived the result of measuring the load of CPU and memory. As a result, it was confirmed that the reliability on the deposition processes were improved through performing some functions of the equipment controllers by the IoT. As confirmed through this paper, by applying the IoT to the deposition process, it is expected that the stability of the equipment will be improved by minimizing the load on the equipment controller even when the equipment is expanded.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.63-71
• /
• 2002

This paper examines the ASCE first generation benchmark problem for a seismically excited cable-stayed bridge, and proposes a new semi-active control strategy focusing on inclusion of effects of control-structure interaction. This benchmark problem focuses on a cable-stayed bridge in Cope Girardeau, Missouri, USA, for which construction is expected to be completed in 2003. Seismic considerations were strongly considered in the design of this bridge due to the location of the bridge in the New Madrid seismic zone and its critical role as a principal crossing of the Mississippi River. In this paper, magnetorheological(MR) fluid dampers are proposed as the supplemental damping devices, and a clipped-optimal control algorithm is employed. Several types of dynamic models for MR fluid dampers, such as a Bingham model, a Bouc-Wen model, and a modified Bouc-Wen model, are considered, which are obtained from data based on experimental results for full-scale dampers. Because the MR fluid damper is a controllable energy-dissipation device that cannot add mechanical energy to the structural system, the proposed control strategy is fail-safe in that bounded-input, bounded-output stability of the controlled structure is guaranteed. Numerical simulation results show that the performance of the proposed semi-active control strategy using MR fluid dampers is quite effective.