• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.272-277
• /
• 2017

Organic-inorganic hybrid thermoelectric materials have obtained increasing attention because it opens the possibility of enhancing thermoelectric performance by utilizing the low thermal conductivity of organic thermoelectric materials and the high Seebeck coefficient of inorganic thermoelectric materials. Moreover, the organic-inorganic hybrid thermoelectric materials possess numerous advantages, including functional aspects such as flexibility or transparency, low cost raw materials, and simplified fabrication processes, thus, allowing for a wide range of potential applications. In this study, the types and synthesis methods of organic-inorganic thermoelectric hybrid materials were discussed along with the methods used to enhance their thermoelectric properties. As a key factor to maximize the thermoelectric performances of hybrid thermoelectric materials, the nanoengineering to control the nanostructure of the inorganic materials as well as the modification of the organic material structure and doping level are considered, respectively. Meanwhile, the interface between the inorganic and organic phase is also important to develop the hybrid thermoelectric module with excellent reliability and high thermoelectric efficiency in addition to its performance in various electronic devices.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.28-32
• /
• 2006

Diarylethene in photochromic materials was doped in organic-inorganic hybrid low-melting glasses were synthesized through a nonaqueous acid-base reaction process, which consists of network units including a small number of bridging oxides. The organic phase is a dichlorodimethylsilane while the inorganic phase is a tin(II) chloride. Diarylethene was incorporated into the glasses without any degradation of its functionality. The open form of diarylenthene, which is converted from the opening one upon UV-irradiation, is change to the closed form visible light-irradiation. The rate constant of the photochemical reaction is $31.78\times10^{-3}s^{-1}$ with 400 W UV lamp irradiation.

• 공업화학
• /
• 제16권5호
• /
• pp.719-723
• /
• 2005

Tetraethyl orthosilicate (TEOS) 혹은 1,2-bis(triethyoxysilyl)ethane (BTSE)과 여러 종류의 organosilane들을 공중합하여 유 무기 혼성 메조포러스 물질들을 제조하고, 이들이 공기 중의 휘발성 유기화합물(VOC)들을 흡착 제거하는 능력을, TEOS 만을 사용하여 제조한 친수성 무기 메조포러스물질인 SBA-15와 비교 평가하였다. 유기 구조의 도입에 의한 소수성의 증대는 메조포러스 물질이 VOC를 흡착 제거하는데 긍정적 효과를 줌을 관찰하였다. 특히 BTSE와 phenyl triethoxysilane을 중량비 90:10으로 공중합한 유 무기 혼성 메조포러스 물질의 VOC 제거 능력은 우수하였다. 또, 물속에 분산된 기름 성분을 흡착 제거하는데 유 무기 혼성 메조포러스 물질들을 유용하게 응용할 수 있음도 정성적으로 관찰하였다.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.290-292
• /
• 2004

Multimode channel waveguides were fabricated using a direct UV patterning technology from thick films deposited by the one-step dip-coating of an organic/inorganic hybrid material (ORMOCER(equation omitted). The core size of the covered ridge waveguide was 43${\times}$51 $\mu\textrm{m}$$^2$; the waveguides can be readily prepared for multimode applications by direct UV patterning. The waveguides exhibited smooth surface profiles and a low optical loss of 0.07 ㏈/cm at the most important wavelength (850nm) used for optical interconnects.

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.64-75
• /
• 2015

Single $TiO_2$ coating prepared by sol-gel process usually experiences cracks in coating layer. In order to prevent cracks, an inorganic-organic hybrid $TiO_2-SiO_2$ coating was synthesized by combining precursors with an organic functional group. Five different coatings with various ratios of (1:8, 1:4, 1:1, 1:0.25 and 1:0.125) titanium alkoxide (TBOT, Tetrabutylorthotitanate) to organo-alkoxysilane (MAPTS, ${\gamma}$-Methacryloxy propyltrimethoxysilane) on carbon steel substrate were made by sol-gel dip coating. The prepared coatings were analyzed to study the coating properties (surface crack, thickness, composition) by scanning electron microscope (SEM), focused ion beam (FIB), and Fourier transform infrared spectroscopy (FT-IR). Potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) were also performed to evaluate the corrosion characteristics of the coatings. Crack free $TiO_2-SiO_2$ hybrid coatings were prepared with the optimization of the ratio of TBOT to MAPTS. The corrosion rates were significantly decreased in the coatings for the optimized precursor ratio without cracks.

• 한국재료학회지
• /
• 제26권5호
• /
• pp.271-280
• /
• 2016

When a single inorganic precursor is used for the synthesis of a sol-gel coating, there is a problem of cracking on the surface of coating layer. In order to solve this problem of surface cracking, we synthesized inorganic-organic coatings that have hybrid properties of inorganic and organic materials. Sols of various ratios (1:0.07, 0.2, 0.41, 0.82, 1.64, 3.26, 6.54, 13.2) of an inorganic precursor of Tetrabutylorthotitanate ($Ti(OBu)_4$, TBOT) and an organic precursor of ${\gamma}$-Methacryloxy propyltrimethoxysilane (MAPTS) were prepared and coated on stainless steels (SUS316L) by dip coating method. The binding structure and the physical properties of the synthesized coatings were analyzed by FT-IR, FE-SEM, FIB (Focused Ion Beam), and a nano-indenter. Dynamic polarization testing and EIS (electrical impedance spectroscopy) were carried out to evaluate the micro-defects and the corrosion properties of the coatings. The prepared coatings show hybrid properties of inorganic oxides and organic materials. Crack free coatings were prepared when the MAPTS ratio was above a critical value. As the MAPTS ratio increased, the thickness and the corrosion resistance increased, and the hardness decreased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1115-1118
• /
• 2006

Using a thermally-crosslinkable organosiloxane-based organic-inorganic hybrid material, solution processable gate dielectric layer for organic thin-film transistors (OTFTs) have been fabricated. The hybrid dielectrics are synthesized by the sol-gel process, followed by the heat-treatment at $190{\bullet}\;.{\bullet}$ To investigate the electrical property of hybrid dielectric, leakage current behavior and capacitance were measured. To fabricate coplanar-type OTFTs, Au/Cr electrode was deposited onto the heavily doped silicon substrate with the organic-inorganic hybrid dielectric layer and then ${\alpha},{\omega}-dihexylquaterthiophene$ was drop-cast between source and drain electrical performance of the fabricated transistor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.78-83
• /
• 2001

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate content and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defect in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.20-25
• /
• 2007

SiOC 박막과 같은 유무기 하이브리드 실리카 물질에서의 열처리효과에 의한 결합구조의 변화와 유전상수에 관하여 연구하였다. 유무기 하이브리드 실리카 물질은 BTMSM과 산소의 혼합가스를 이용한 CVD방법에 의하여 증착되었다. 유무기 하이브리드 실리카 물질은 증착조건에 따라 3가지 유형으로 분류되었으며, 유전상수는 MIS 구조에 의하여 조사되었다. XPS 분석에 의하여 C 1s 스펙트라는 O2/BTMSM=1.5의 유량비를 갖는 박막에서 282.9 eV의 organometallic carbon 반응을 보여주는 피크를 나타내었다. organometallic carbon반응의 결과는 안정성 있는 크로스 링크 결합구조를 만들어내며, 하이브리드 특성을 갖는 이 박막에서 열처리 후 유전상수는 가장 낮았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.422-422
• /
• 2009

Photocurable inorganic-organic hybrid materials were prepared from colloidal-silica nanoparticles synthesized through the solgel process and using acryl resin. The synthesized colloidal-silica nanoparticles had uniform diameters of around 20 nm, and they were organically modified, using methyl and methacryl functional silanes, for efficient hybridization with acryl resin. The organically modified and stabilized colloidal-silica nanoparticles could be homogeneously hybridized with aeryl resin without phase separation. The successfully fabricated hybrid materials exhibit efficient photocurability and simple film formation due to the photopolymerization of the organically modified colloidal-silica nanoparticles and acryl resin upon UV exposure. The fabricated hybrid films exhibit an excellent optical transmission of above 90% in the visible region as well as an enhanced surface smoothness of around 1 nm RMS roughness. In addition, the hybrid films exhibit improved thermal and mechanical characteristics, much better than those of acryl resin. More importantly, these photocurable hybrid materials fabricated through the synergistic combination of colloidal-silica nanoparticles with acryl resin are candidates for optical and electrical applications.