• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.34-35
• /
• 2016

Most of the construction adhesive may contain harmful component to the human body with an organic adhesive. In addition, when the adhesive caused hydroquinone, alkyl benzophenone, etc, also it raises the skin diseases to workers. Therefore, the inorganic adhesive development is necessary. This study was a study to know adhesive strength properties that adhesive using a magnesium oxide according to the addition ratio of the retarder. It has experiments to two types of magnesium oxide and type and ratio of retarder differently.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.48-49
• /
• 2018

Recently the old buildings have been increasing and increasing reconstruction. As a result, the frequency of use of architectural adhesives has increased. Adhesives are not only used for bonding but also for building materials used in various fields. However, since the adhesive is made of an organic material, it causes various skin diseases and sick house syndrome, and when a fire occurs, harmful substances are generated, and incomplete combustion may cause personal injury. Therefore, in this study, to solve the disadvantages of conventional adhesives, we tried to develop inorganic adhesives using inorganic materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.78-79
• /
• 2013

As a part of study to maximize the amount used of the ground granulated blast-furnace slag, the study deals with setting properties of paste that is mixed the ground granulated blast-furnace slag with CaO-Al₂O₃ based inorganic blinder. The results of the experiment show that the setting time is most fast in the mix of 25% rate of CaO-Al₂O₃ based inorganic blinder. It is generally needed 2 hours for work time in precast concrete products. In this study, this requirement is achieved when using the retarder of 0.5%.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.401-408
• /
• 2002

무기질 지연제인 붕산 첨가시 OPC의 수화지연 특성을 연구하였다. 붕산 무첨가시에는 수화시작 수분안에 침상형의 Ettringite가 활발하게 생성하나 붕산을 첨가함에 따라 Ettringite와 $Ca(OH)_2$의 형성은 지연되었다. 이는 pH의 저하에 따른 Al이온의 안정화로 수화반응이 지연되기 때문이다.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.407-412
• /
• 2018

In this study, we have made a cement based inorganic insulation material and added CSA (Hauyne Clinker) to reduce the demolding time and enhance the handling workability. CSA contents were varied by 0%, 1%, 3%, 5% and the atmospheric steam curing was tried for enhancing the compressive strength. As the CSA contents are increased to 5%, a rapid reaction of hydration caused the sinking of the slurry. So, the setting-retarder was added to control the reaction of hydration. By this, the sinking of the slurry was controlled but the height of the green body after expansions was a little bit lowered. In the CSA-added slurry, it was possible to demold within 24 hours and in case of CSA 5%-added, the sufficient workability was secured. Atmospheric steam curing (temperatures $-40{\sim}80^{\circ}C$, for 6~10 hrs.) was attempted to improve the compressive strength and found that an excellent strength of 0.25 MPa was achieved at $80^{\circ}C$ for 8 hrs. Specific gravity was about $0.12{\sim}0.13g/cm^3$ and heat conductivity was about 0.045 W/mK in all specimens. This strategy significantly improves the compressive strength of CSA 5%-added specimen up to 25% compared to without CSA added specimen.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.468-473
• /
• 2019

This study focused on manufacturing an inorganic insulation material set with various amounts of calcium-sulfoaluminate (CSA) (hauyne) content for enhancing both workability (demolding, handling) and the high thermal insulating property. To carry out the experiment, the amounts of CSA utilized were 5%, 10%, 15%, and 20%, with anhydrous gypsum added in equal proportion to produce a stable formation. As the content of CSA increased, a sinking phenomenon occurred because of the hydration reaction from the slurry, so it was difficult to utilize a retarder normally used in the cement manufacturing process. However, an RCOOM surfactant was able to solve the local clumping problem from cement and CSA and obtain a rapid retarding effect, so it was included in this process at 0.3%. Furthermore, the cement fineness was not 7000 ㎠/g but rather 3300 ~ 4000 ㎠/g to prevent a rapid temperature increase in the slurry. The specific gravity of the sample manufactured with 20% CSA was approximately 0.11 g/㎤, and its thermal conductivity was 0.041 W/m·K, providing an excellent insulating property.

• 한국건축시공학회지
• /
• 제19권4호
• /
• pp.289-297
• /
• 2019

현재 건축물에 사용되는 접착제는 주로 유기질 재료인 에폭시 수지 접착제가 사용되고 있다. 유기질 재료인 에폭시 수지 접착제는 유기성 물질로 접착제 생산 시 유해물질이 발생하며, 시공 후에도 유해물질이 실내거주공간에서 높게 나타난다. 또한 건축물 화재 시 유기 재료에서 발생되는 다량의 일산화탄소가 인명피해로 이어진다. 본 연구는 순수무기계 재료인 산화마그네시아, 인산염, 붕사를 사용한 무기 접착재에 대해 기존 유기 접착제를 대체 할 무기 접착재로의 활용가능성을 평가한 연구이다. 적정 인산염 선정에 관한 실험과 지연제로서 활용한 붕사의 첨가율에 대한 특성을 실험한 결과 적정 인산염으로 제1인산칼륨이 도출되었으며, 붕사 첨가율에 따른 특성을 측정한 결과 KS F 4923의 품질기준과 비교하여 경화수축률과 가열변화율은 품질기준을 만족하였으며, 인장강도는 붕사 첨가율 4% 이상에서 만족하는 결과가 나왔지만 접착강도의 경우 품질 기준을 충족하지 못하였다. 향후 접착강도 증진을 위한 추가적인 연구가 필요할 것으로 판단된다.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.343-349
• /
• 1998

$TiCL_4$수용액의 탈수 반응에 있어 pH의 영향에 관하여 연구하였다. KOH와 HCl을 탈수 촉진 및 탈수 지연제로 사용하여 실험한 결과 다음과 같은 결론을 얻었다. $TiCL_4$ 수용액과 KOH와의 반응계에서 중화점은 pH 7.4이었으며 중화점 이전에서는 반응 생성물로 polymetatitanic acid의 중합체인 Ti-gel이 생성되고 중화점 이상에서는 재탈수 반응에 의하여 oligomer화가 일어난다. 또한 결정성 potasium titanate는 존재하지 않는다.

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.307-312
• /
• 1996

In following addition of 0.3, -0.6, 0.8, 1.0 and 5 weight percent MgSiF66H2O studies have been made of the setting and hardening characteristics of ordinary portland cement. MgSiF66H2O retarded the setting time of ordinary portland cement and extended the induction pariod of the hydration. In ordinary portland cement the setting characteristics were drastically altered especially at high MgSiF66H2O contents. Evidence was also obtained by the formation of a KSiF6 which was very fine particle. The results wee as follows. 1. Slump was slightly decreased when MgSiF66H2O added. 2. Setting time was retarded depending on the amount of retarding agent 2 to 8 hours 3. Compressive strength was almost same or some increased in comparision with opc. 4. When MgSiF66H2O was added to cement paste K2SiF6 were formed It was fine-sized distributed uniformly in cement grain and caused retardation of cement setting.