• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.25-36
• /
• 2018

Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.637-645
• /
• 1999

Two putative regulator genes, mocR and mocS, of the moc (mannityl opine catabolism) operons in pTi15955 of the octopine-/mannityl opine-type Agrobacterium tumefaciens strain 15955, were tested for their possible roles as repressors in the moc operons. The regions upstream of macC and mocD, the first structural genes in the two divergently oriented moc operons, were transcriptionally fused into the promoterless lacZ reporter gene. Each of the lacZ-fusions was introduced into Agrobacterium strain UIA5, a Ti plasmid-cured derivative, harboring either a mocR or a mocS clone. The resulting strains were grown in media containing various sugar sources, and the $\beta$-galactosidase activities were quantitatively measured. The results suggested that MocR repressed the expression of macC and macD. The expression of the fused $\beta$-galactosidase was not induced by mannopine (MOP) or possible catabolic intermediates of the opine, e.g. santhopine (SOP), glucose, mannose, or glutamine. However, the repression was significantly relieved by the supplementation of MOP and the concomitant introduction of the agcA gene encoding MOP cyclase that catalyzes the lactonization of MOP to agropine (AGR). These results suggested that AGR, rather than MOP or the other catabolic intermediates, is the inducer for the expression of the operon. On the contrary to previous report showing that the induction levels of macC and macD were lowered by the supplementation of inorganic nitrogen in media, the expression of these genes was not affected by the level of nitrogen in our reporter system. MocS did not strongly repress the expressions of macC and mocD. It is possible that MocS may be involved in the regulation of the operons present downstream of the moc operon, which are responsible for the utilization of mannopinic acid and agropinic acid.

• Journal of Korean Society of Forest Science
• /
• v.97 no.3
• /
• pp.285-290
• /
• 2008

This study was carried out to obtain an optimal liquid culture condition for Sarcodon aspratus mycelia. Among various basal culture media the GYS (glucoe-yeast extract-soytone) medium was the best for mycelial growth. The appropriate temperature was $25^{\circ}C$. Starch, maltose or glucose was excellent carbon sources for the mycelial culture, compared to others tested. As nitrogen nutrients, soytone and $NH_4-N$ were the best organic and inorganic nitrogen sources, respectively. Moreover, the optimal concentration of soytone was 3 g per one-liter medium. In addition, we also found that alanine, $(NH_4)H_2PO_4$, and nicotinic acid were the best aminoacid, phosphorus salt, and vitamin, respectively. When all optimal conditions described above were applied to culture medium, we were able to produce 5.7 g dry weight of S. aspratus mycelia per one-liter liquid medium within 20 days.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.97-102
• /
• 2000

In order to use Metarhizizmn~ anisopliae as a biological pesticide, effect of envrionmental factors on nlycelial growth, spore formation, and extracellular enzyme activity in culture broth of M. anisopliae DGUM 35001 was determined. Optimal temperature was 26^{\circ}C.$ and optimal pH ranged from 5 to 9. Among the complex media tested, MCM and SDPY media were the most favorable for mycelial growth. When Czapek-Dox agar was used as a mnimal medium, glucose and sucrose among the saccharides were very excellent source of carbohydrate. Among the biopolyners tested. chitin was the most favorable source for mycelial growth and produced high aerial inycelia. Urea and ammonium phosphate as an inorganic nitrogen source and bacto-peptone and soytone as an organic nitrogen source enhanced the mycelial growth When serine as a source of amino acid was supplemented, excellent mycelial growth was shown. Large amount of spores could be obtained from the aerial mycelia of starch medium. When the culture broth was filtrated and then the concentrate with ammonium sulfate was used as a crnde enzyme solution, high enzyme activities of amylase and protease were shown. However, lipase and chitinase activities were comparatively low.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.16-16
• /
• 2015

Ectomycorrhizal (ECM) mushrooms play a major role in plant growth promotion through symbiotic association with roots of forest trees. They also provide an economically important food resource to us and therefore they have been studied for their artificial cultivation for decades in Korea. We have secured bio-resources of ECM mushrooms from Korean forests and performed their physiological studies. To investigate the cultural characteristics, the fungi were cultured under different conditions (medium, temperature, pH of the medium, inorganic nitrogen source). More than 90% of total 160 strains grew on three solid media (potato dextrose agar, PDA; sabouraud dextrose agar, SDA; modified Melin-Norkrans medium, MMN). The rate of mycelial growth on malt extract agar (MEA) was lower than those of three media (PDA, SDA, MMN). None of the Tricholomataceae strains grew on MEA. Many strains of ECM mushrooms were able to grow at the temperature range of $15{\sim}25^{\circ}C$ on PDA, while they showed poor growth at $10^{\circ}C$ or $30^{\circ}C$. In particular, the growth rates of both Gomphaceae and Tricholomataceae were significantly lower at $10^{\circ}C$ than at $30^{\circ}C$. The optimal pH of many strains was pH 5.0 when they cultured in potato dextrose broth (PDB). Fifty-seven percent of tested strains grew well on medium containing ammonium source than nitrate source. Many strains of Tricholomataceae showed a notable growth on ammonium medium than nitrate medium. Twenty-three percent of strains preferred nitrate source than ammonium source for their mycelial growth. The production and activity of two enzymes (cellulase and laccase) by ECM fungi were also assayed on the enzyme screening media containing CMC or ABTS. Each strains exhibited different levels of enzymatic activities as well as enzyme production. The number of laccase-producing strains was less than that of cellulase-producing strains. We found that 77% of tested strains produced both cellulase and laccase, whereas 2% of strains did not produce any enzymes. The morphological characteristics of mycelial colony were also examined on four different solid media. Yellow was a dominant color in mycelial colony and followed by white and brown on all culture media. ECM mushrooms formed mycelial colonies with a single or multiple colors within a culture medium depending on the strains and culture media. The most common shape of mycelial colony was a circular form on all media tested. Other families except for Amanitaceae formed an irregular colony on MMN than PDA. All strains of Tricholomataceae did not form a filamentous colony on all media. The pigmentation of culture media by mycelial colonies was observed in more than 50% of strains tested on both PDA and SDA. The degree of pigmentation on PDA or SDA was higher than MMN and brown color was dominant than yellow color. The production of exudates from mycelial colony was higher on PDA than MMN. Brown exudates were mainly produced by many strains on PDA or SDA, whereas transparent exudates were mainly produced by strains on MMN. We observed the mycelial colonies with a single or multiple textures in just one culture plate. Wrinkled or uneven colony surfaces were remarkably observed in many strains on PDA or SDA, while an even colony surface was observed in many strains on MMN. Sixty percent of Tricholomaceae strains formed wrinkled surface on PDA. However, they did not form any wrinkle on MMN plate. Cottony texture was observed in mycelia colonies of many strains. Velvety texture was often observed in the mycelial colonies on SDA than PDA and accounted for 60% of Suillaceae strains on SDA.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.35-45
• /
• 2012

Polyacrylate dispersion(emulsion) as adhesive material was superior in quality such as preservation characteristics and reversibility. The tapes for repairing archival documents manufactured with four different types of formulation resulted in pH 7~8.8, soluble solid 50~52%, and viscosity 1,300~2,500 cps. Sample 4 of those was most excellent. Probably, sample 4 included inorganic materials such as MgO, silica gel, and zeolite. For selecting carrier of tape, tracing papers, were applied for manufacturing tapes and tested for adhesive strength and peel strength. Adhesive strength of tracing papers, was 3.1~3.8(N/10mm), 2.2~2.8(N/10mm), and 1.7-2.3(N/10mm), respectively. Peel strength was similar in all samples. To determine characteristic of conservation to the selected carriers, stability of deterioration was examined at conditions of $105^{\circ}C$ and $80^{\circ}C$ 65% for 7 days.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.21-28
• /
• 1999

The seeds of Zoysiagrass (Zoysia japonica Steud.) were soaked with GA3 50 ppm and primed with CaCl2 at -1.0 MPa for 4days at 23$^{\circ}C$ to identify presoaking and priming regimes that may improve germination in saline condition and with PEG 8000 at high temperature. Presoaked, primed, and untreated seeds were then germinated at 30 and $35^{\circ}C$. NaCl salinity stress consistently decreased the rate of germination of zoysiagrass seed. GA3 or CaCl2 alleviated the inhibitory effect of salinity on germination. However, total percent germination (G) and T50 of untreated control seeds significantly decreased and prolonged at $30^{\circ}C$ and $35^{\circ}C$ as NaCl salinity stress increased. Presoaked seeds with GA3 50 ppm for 4 days at $23^{\circ}C$ had significantly higher germination and lower T50 than untreated or primed with CaCl2 at -1.0 MPa for 4days at $23^{\circ}C$m and overcame the inhibitory effect of germination derived from PEG 8000. In addition, presoaked seed had higher, faster, and more uniform germination than untreated seeds after sowing in growing media in greenhouse.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.336-343
• /
• 1996

Maximum amount of the aminopeptidase M inhibitors produced by Streptomyces griseoplanus SL20209 in 500 ml-Erlenmeyer flask was accumulated after cultivation for 3 days at 28$\circ$C, thereafter the amount of inhibitors decreased slowly with a pH change to alkaline. Arabinose, xylose, mannose and soluble starch were good carbon sources for the production of the inhibitors. On the other hand, glucose was only good for the cell growth but potently inhibited the production of inhibitors. Natural organic nitrogen sources such as soybean meal, fish meal, gluten meal and peanut powder were good for the production of inhibitors, however, soytone, peptone and inorganic nitrogens such as NH$_{4}$C1 and NH$_{4}$NO$_{3}$ were poor. Inclusion of yeast extract (0.5%, w/v) or K$_{2}$HPO$_{4}$ (0.05%) into the production medium increased the production of inhibitors by accelerating cell growth. The production of inhibitors was slightly increased on the medium containing CaCO$_{3}$ (0.3%) and zeolite (0.5%), respectively. Optimal temperature and initial pH range for the production ot inhibitors were determined to be 28$\circ$C and 6.0-7.0, respectively. Employing two improved production media consisting of 3% arabinose or soluble starch, 2.5% soybean meal, 0.5% yeast extract, 0.05% K$_{2}$HP0$_{4}$, 0.1% CaCO$_{3}$ and 0.3% zeolite (pH 6.8), 1.8-fold increase in the amount of inhibitors was achieved, comparing with the basal medium used.

• Korean Journal of Microbiology
• /
• v.20 no.3
• /
• pp.119-124
• /
• 1982

As a basic study to elucidate nutritional physiology and composition of synthetic medium of red rotting bacteria, Erwinia carotovora, of ginseng, the effects of hydrogen ion concentration, various kinds of carbon sources, nitrogen source, micrometallic salts and it's concentration on the gorwth of the bacteria were investigated and the results were as follows. Optimal pH in the basal medium for the growth of the bacteria was 6.5. After incubation the pH in culture media was neutralized. Among the various kinds of carbon sources, sucrose, glucose mannitol, but organic acids were not utilized effectively as nutrients. After incubation the pH turned acidic. Alanine as organic nitrogen sources nad ammonium sulfate as inorganic nitrogen promoted the growth, but L-valine and sodium nitrite were the least effective. Ferric chloride 1.0mg/dl and ferrous sulfate 100mg/dl were the most effective as micrometallic sources. Control and boric acid were the least effective. New synthetic medium based on the above results was follows ; Alanine 1.0g, $KH_2PO_4\;1.0g, \;sucrose\;30.0g, \;MgSo_4{\cdot}7H_2O\;0.5g, \;FeCl_3{\cdot}6H_2O\;1.0mg\;thiamine\;200{\gamma}g$, and distilled water 1000ml, pH6.5.