• 제목/요약/키워드: Inorganic fraction

검색결과 124건 처리시간 0.022초

우리나라 전통 숯의 물리.화학적 특성 (Characteristics of Physical and Adsorption of Korean Traditional Charcoal)

  • 김준태;김선화;김해진
    • 환경위생공학
    • /
    • 제21권4호
    • /
    • pp.77-86
    • /
    • 2006
  • The water purification was very important in Korea which has not sufficient water resource and while adsorption method among the various methods to eliminate the water pollutants has been widely used by activated carbon. This study was conducted the basic experiment for hall distribution, pH, conductivity, electronic microscope, cation exchange and inorganic materials the adsorption capacity of Korean traditional charcoal which has similar characteristics to activated carbon of organic pollutants. As a result of observing Korean traditional charcoal with electronic microscope, it was found that it has porous structure, oak charcoal has circular structure, pine charcoal has square structure and bamboo charcoal has hexagonal structure, which has high void fraction per unit area because of its thin cell wall structure. As a result of experimenting hall distribution, hall distribution of bamboo high temperature charcoal is high as 0.269cc/g and has the greatest inorganic contents and cation exchange capacity(CEC) which are the important factor of chemical adsorption.

꽃사슴 녹용(鹿茸)의 생화학적성분(生化學的成分)의 조성(組成) 및 함량(含量) (Analysis of the Composition of Biochemical Components in Unossified Antlers)

  • 임순성;정하숙;백인범;신국현
    • 생약학회지
    • /
    • 제30권3호
    • /
    • pp.314-319
    • /
    • 1999
  • The composition of biochemical components such as lipids, proteins and their amino acid components and inorganic elements in the ashes in unossified antlers from Cervus nippon Temminck var. mantchuricus grown in Korea were analyzed to obtain fundamental data for quality control. As a result, it was found that total lipids were 20.75% which was approximately similar contents with those of proteins (21.8%). Sixteen amino acids were identified from the hydrolysate of the protein fraction. Three gangliosides with very similar TLC patterns of those such as $GM_3$, $GM_1$ and $GM_{1a}$ were identified from the water soluble layer of Folch's partitions. Ash contents were revelaed to be much higher in the sponge layer (40.0%) than in the velvet layer (3.7%).

  • PDF

대청호 추소리 수역의 퇴적물이 조류 성장에 미치는 영향 (Effects of Sediments on the Growth of Algae at Chusori Area in Daechung Reservoir)

  • 오경희;김용준;조영철
    • 한국물환경학회지
    • /
    • 제31권5호
    • /
    • pp.533-542
    • /
    • 2015
  • In order to investigate the effect of internal loading from sediment on algal blooming at Chusori area in Daechung Reservoir, the amount and contamination level of sediment and the release rate of total phosphorus were analyzed. The sedimentary layer was consisted with two layers, and the average depth of upper and lower ones were 0.35 and 1.44 m, respectively. The fraction of inorganic phosphorus in the sediment was higher than that of organic phosphorus, and the fractions of phosphorus which responsible for internal loading were very high as in the range of 72.7 and 80.2% of inorganic phosphorus. The C/N ratio of sediment taken with core sampler indicated the organic compounds are originated from settled algae from water body. The average release rate of total phosphorus from sediment was $6.74({\pm}0.50)mg/m^2/day$. These results indicated that the internal loading from sediment contributes the excessive algal growth at Churosi area, and the countermeasures to improve the quality of sediments are required to manage algal blooming in Daechung Reservoir.

나노 분말 복합체 형성을 통한 PVDF 기반 에너지 하베스팅 소자 성능 향상 기술 동향 (Recent Development in Performance Enhancement of PVDF-Nanopowder Composite-based Energy Harvesting Devices)

  • 최건주;박일규
    • 한국분말재료학회지
    • /
    • 제27권3호
    • /
    • pp.247-255
    • /
    • 2020
  • Recently, interest in technology for eco-friendly energy harvesting has been increasing. Polyvinylidene fluoride (PVDF) is one of the most fascinating materials that has been used in energy harvesting technology as well as micro-filters by utilizing an electrostatic effect. To enhance the performance of the electrostatic effect-based nanogenerator, most studies have focused on enlarging the contact surface area of the pair of materials with different triboelectric series. For this reason, one-dimensional nanofibers have been widely used recently. In order to realize practical energy-harvesting applications, PVDF nanofibers are modified by enlarging their contact surface area, modulating the microstructure of the surface, and maximizing the fraction of the ν-phase by incorporating additives or forming composites with inorganic nanoparticles. Among them, nanocomposite structures incorporating various nanoparticles have been widely investigated to increase the β-phase through strong hydrogen bonding or ion-dipole interactions with -CF2/CH2- of PVDF as well as to enhance the mechanical strength. In this study, we report the recent advances in the nanocomposite structure of PVDF nanofibers and inorganic nanopowders.

Saccharomyces uvarum의 배양시기에 따른 여러가지 인산화합물의 함량에 미치는 IAA의 효과 (Effect of indole acetic acid on the contents of various phosphate compounds in the growth phase of saccharomyces uvarum)

  • 이종삼;조선희
    • 미생물학회지
    • /
    • 제19권2호
    • /
    • pp.52-62
    • /
    • 1981
  • In order to interpret the effect of IAA on the phosphate metabolism and biosynthesis of organic compounds, Saccharomyces uvarum were cultured in the media treated with various concnetration of IAA $(10^{-3}M,\;10^{-5}M,\;10^{-7}M)$. Sampling at the beginning and intervals of culture, yeast cells fractionated were traced the contents of inorganic phosphate and organic compounds of various fractions. 1. Growth of Saccharomyces uvarum were enhanced by IAA $(10^{-3}M,\;10^{-5}M)$ and phosphate contents in DNA and RNA fractions treated with IAA were accelerated 2.3 times and 2 times in comparison with those of control. 2. Amounts of poly-P"A" and poly-p"B" were increased but poly-P"C" decreased during the culture. Therefore, it is considered that poly-P"C" play on most important role as a phosphate pool. 3. It is suggested that because phosphate contents in DNA, protein and lipid fractions increased, inorganic phosphates required phosphates required RNA were transferred from phosphates in cytoplasm, because these increased slowly during the culture. 4. Alkali-labile protein were accelerated by IAA and alkali stable protein only were inhibiction were enhanced by IAA while, ethanol : ether soluble fraction was induced by $10^{-7}M$ IAA in comparison with those control.X> IAA in comparison with those control.

  • PDF

대청호 저토의 N, P및 Si 영양염 함량과 조류생장잠재력 (The Contents of Nitrogen, Phosphorus, Silicon Nutrient and Algal Growth Potential (AGP) in the Sediment of Taechong Reservoir)

  • 조경제;신재기
    • 생태와환경
    • /
    • 제34권2호통권94호
    • /
    • pp.106-118
    • /
    • 2001
  • 대청호내 3개 지점에서 저토의 영양염을 조사하여 수층과 식물플랑크톤에 대한 생장 잠재력에 미치는 영향을 파악하였다. 저토-수층의 경계면에서 DO는 0.5 mg $O_{2}$/l 이하로서 무산소 상태였다. 공극수의 전기전도도는 저토보다 1.9${\sim}$2.6배 더 높았고 수심이 얕을수록 변동폭이 컸다. Eh는 -12${\sim}$-148mV 범위였고 가비중은 1.17${\sim}$1.30g/cm$^{3}$ 범위로서 지역간에 차이가 크지 않았다. 함수율과 유기물 함량은 각각 58%${\sim}$72%, 8${\sim}$13% 범위로서 댐 부근에서 높았고 옥천천에서 낮았다. 저토의 입도 조성은 사질이 97%를 차지하였다. 저토내 총세균수와 규조류의 세포밀도는 수심이 깊은 하류에서 높았다. 공극수와 치환성의 질소와 인 함량에서 입자성이 용존성보다 풍부하였고, 무기 질소로는 NH$_{4}$가 대부분이었다. 또한 유기와 무기 질소 형태로 볼 때, 공극수내 질소함량은 무기 질소가 많았고, 치환성 질소는 유기 질소가 많았다. 공극수 인 함량에서 용존 유기 인이 많았고 치환성은 무기 인이 많았다. 저토내 규소는 치환성이 최대 63%로서 공극수보다 훨씬 많았다. 대청호의 저토는 유기물이 풍부한 부영양 상태로 평가되었다.

  • PDF

익산지역 가을철 대기 중 호흡성 및 흡입성 먼지입자의 화학조성 (Chemical Composition of Respirable PM2.5 and Inhalable PM10 in Iksan City during Fall, 2004)

  • 강공언
    • 한국환경보건학회지
    • /
    • 제36권1호
    • /
    • pp.61-71
    • /
    • 2010
  • Intensive measurements of airborne respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were conducted in the downtown area of Iksan city. The $PM_{2.5}$ and $PM_{2.5}$ samples were collected twice a day in the Iksan city of Korea from October 17 to November 1, 2004. The purpose of the study was to determine the inorganic water-soluble components and trace elements of $PM_{2.5}$ and $PM_{2.5}$ in the atmospheric environment and estimate the contribution rate of major chemical components from a mass balance of all measured particulate species. The chemical analysis for PM samples was conducted for water-soluble inorganic ions using ion chromatography and trace elements using PIXE analysis. The mean concentrations of respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were $51.4{\pm}29.7$ and $79.5{\pm}39.6\;{\mu}g/m^3$, respectively, and the ratio was 0.62. The ion species of $NO_3$, $SO_4^2$, and $NH_4^+$ were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These components predominated in respirable $PM_{2.5}$ fraction, while $Na^+$, $Mg^{2+}$, $Ca^{2+}$ mostly existed in coarse particle mode. Elemental components of S, Cl, K, and Si were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These elements, except for Si, were considered to be emitted from anthropogenic sources, while Si, Al, Fe, Ca existed mainly in coarse particle mode and were considered to be emitted from crustal materials. The averaged mass balance analysis showed that ammonium nitrate, ammonium sulfate, crustal component, and other trace elements were composed of 18.4%, 13.2%, 4.8%, 3.5% for PM2.5 and 17.0%, 11.6%, 13.7%, 4.4% for $PM_{2.5}$, respectively.

군산지역의 강하분진 및 금속원소의 침착속도 추정 (Estimation of Deposition Rates of Dustfall and Metallic Elements in Kunsan)

  • 김성천
    • 한국대기환경학회지
    • /
    • 제16권5호
    • /
    • pp.431-443
    • /
    • 2000
  • The purpose of this experimental study is to investigate seasonal deposition flux variations and deposition velocities of the total dusfall and various inorganic elements in it. Total 41 dustfall and TSP samples were collected from November, 1997 through December, 1998 in Kunsan. Each sample was analyzed by and AAS to determine he levels of 5 inorganic elements: Zn, Cd, Cr, Fe and Pb. Deposition fluxes, soluble/total fractions and deposition velocities for each element were extensively investigated. Estimated dry deposition fluxes of dustfall and elements in Kunsan were in the range of 14.6~48.8(mean 25.6) ton/$\textrm{km}^2$/yr for dustfall, 14.5~72.6(mean 44.1)kg/$\textrm{km}^2$/yr for Zn, 0.9~0.5(mean 3.0) kg/$\textrm{km}^2$/yr for Cd, 2.1~239.2(mean 63.9) kg/$\textrm{km}^2$/yr for Cr, 331.6~1,082.7(mean 873.9) kg/$\textrm{km}^2$/yr for Fe, 5.2~178.4(mean 49.2) kg/$\textrm{km}^2$/yr for Pb, respectively. And the concentra-tion of TSP and elements in Kunsan were 71$\mu\textrm{g}/m^3$ for TSP, $29.9ng/m^3$ for Zn, $0.6ng/m^3$ for Cd, $0.1 ng/m^3$ for Cr, $1,061.0 ng/m^3$ for Fe, $4.0 ng/m^3$ for Pb, respectively. And the estimated deposition velocity of dustfall and elements in Kunsan were 1.13$\times$ 10(sup)-2 cm/sec for dustfall, 4.67$\times$ 10(sup)-2 cm/sec for Zn, 16.92 cm/sec for Cd, 15.69 cm/sec for Cr, 1.72$\times$ 10(sup)-2 cm/sec for Fe, 0.36 cm/sec for Pb, respectively.

  • PDF

해양환경의 에어로졸 화학- 농도와 함량비를 이용한 이온성분간의 관계에 대한 추론 (Aerosol Chemistry in the Marine Environment: Inference of Inter-logic Relationships from the Concentrations and Ratios of Sonic Constituents)

  • 김기현;이강웅
    • 한국대기환경학회지
    • /
    • 제14권2호
    • /
    • pp.143-152
    • /
    • 1998
  • The aerosol concentrations of ionic components were measured on a daily basis from a coastal monitoring site located at Kosan, Cheju Island from 26 September to 5 October 1997 as a field-intensive for a LRTAP project The chemical species we investigated include most of important inorganic species (i.e., Cl-, NO3-, F-, SO42-, Na+, NH4+, and K+) and some organic species (i.e. formats, acetate, and methanesulfonate (MSA) ions). The concentration data of those important inorganic and organic species obtained during this study were evaluated to properly address their chemical and physical characteristics. Most of major inorganic components including sulfate, sodium, chloride, and potassium ions exhibited very conservative relationships with each other such that the concentration ratios of any pair are quite analogous to that of seawater ratio. Since the oceans serve as the major sources of ionic constituents, their concentration changes appear to be senstively reflected by the factors affecting air-sea processes such as an increase in wind speed or changes in wind direction. A comparative analysis of sulfur-containing species such as seasalt (SS) and nonseasalt (NSS) sulfate and MSA were also made to assess the factors influencing the S cycling. An evaluation of NSS/SS ratios suggests that most of sulfate be associated with NSS fraction rather than 55 one. The finding of lower MSA/NSS-SO42- ratio along with a line of physical evidence such as intrusion of anthropogenically affected air mass suggests that the oxidation of S species have been promoted under the conditions encountered during the study period. Finally, the concentration data of carboxylic species (such as formats and acetate ions) were also analyzed. Although the existence of temporal trends were difficult to assess, these data indicate that their contribution to the precipitation acidity may not be significant enough.

  • PDF

INTUMESCENT INORGANIC AND ORGANIC COATINGS

  • Kodolov, V.I.;Mikhalkina, T.M.;Shuklin, S.G.;Bystrov, S.G.;Larionov, K.I.
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
    • /
    • pp.130-137
    • /
    • 1997
  • Intumescent inorganic and organic coatings which dintr one from the other by the type of gas formers and the mechanisms of foam formation have been obtained and investigated. Inorganic intumescent coatings are the compositions based on water glass and mineral additives with different dispersity. Mineral additives contain adsorbed and absorbed water and carbonates which are destructed with the carbon dioxide and water evolution during the flame action on coating. The decreasing of mineral additives particle sizes under the mechanical milling with the fraction precipitation promotes the foam coke formation with less defects. Here the main structure of comparing compositions does not change. In organic coatings based on epoxy-polymers the polyammonium phosphate additive is used. It is the cabonization catalyst and the foam agent. The polyammonium phosphate of various dispersity employed is uniformly distributed on the polymeric matrix. The decreasing of the particle sizes leads to the increasing of the fire resistant properties of the intumescent coa-ting. The fire resistant analysis of the coating during more than an hour: the coating back side the temperature on plastic or wooden materials does not exceed 423K, and on metal-573K.

  • PDF