• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.43-50
• /
• 1989

This experiment was conducted to investigate correlation between microstructure and electrical properties according to Zr/Ti mole ratio in Rhombohedral Phase PZT. Domain behavoir was investigated by the change of thermal expansion coefficient. Piezoelectric properties, the temperature dependence of dielectric constant and the change of dielectric constant before and after poling were measured. Crystal structure, the measurement of lattice parameter were carried by X-ray analysis. Domain pattern before and after poling was examined by SEM.

• 한국세라믹학회지
• /
• 제29권2호
• /
• pp.127-135
• /
• 1992

It has been reported that natural petalite showed a low negative thermal coefficient and wide coefficient and wide coexisting region with liquid phase in Li2O-Al2O3-SiO2 system. Therefore, we investigated variation of microstructure and thermal and mechanical properties when the amount of SiO2 content in petalite compound and MgO addition to it compound were changed. As SiO2 content exceeded 80 wt%, crystal phases of $\beta$-cristobalite and $\beta$-spondumene solid solution were formed. Generally, the densification and bending strength were increased by the addition of MgO, but the positive thermal coefficient was found in the case of MgO 10 wt% addition because of second phase and glassy phase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.300-300
• /
• 2008

In this study, the advanced DuoPIGatron-type ion beam (IB) system was applied to inorganic thin film for aligning liquid crystal (LC). LC alignment on $Ta_2O_5$ via IB irradiation was embodied. As a result of IB irradiation, the homogeneously aligned liquid crystal display (LCD) on $Ta_2O_5$ was observed with low pretilt angles. The $Ta_2O_5$ were deposited on indium-tin-oxide coated Coming 1737 glass substrates by rf magnetron sputtering at $200^{\circ}C$. The deposition process resulted in forming very uniform thin film on glass substrates without any defects. To confirm the application of the inorganic alignment on modem display optical devices, we fabricated twisted nematic LCD and measured optical property and response time. As a result of the experiment, the electro optical characteristics of the LCD fabricated by using IB irradiation on $Ta_2O_5$ alignment layer were similar with the other LCD fabricated by using rubbing process.

• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.47-54
• /
• 2020

본 연구에서는 밝고 화사한 적색 및 황색의 착색 특성을 가지며, 우수한 발광특을 가진 새로운 무기 형광 안료를 개발하기 위하여, A₃V₅O₁₄ (A = K and Rb) 및 Cs₂V₄O₁₁를 water assisted solid state reaction(WASSR) 방법과 고상법을 혼합하여 합성을 하였다. 합성한 A₃V₅O₁₄ (A = K and Rb ) 및 Cs₂V₄O₁₁ 샘플은 AVO₃ 및 AV₃O₈ (A = K, Rb and Cs)가 불순물로 다소 확인되었으나, trigonal 구조의 A₃V₅O₁₄ (A = K and Rb)와 orthorhombic 구조의 Cs₂V₄O₁₁가 주상으로 확인되었다. A₃V₅O₁₄ (A = K and Rb)와 Cs₂V₄O₁₁는 자외선 영역에서 강한 광흡수를 나타내었으며, 각각 적색광 및 녹색광 발광을 나타내었다. 또한, 합성된 A₃V₅O₁₄ (A = K and Rb)는 a* 값 (+ : 적색도, -: 녹색도)은 각각 + 35.5와 + 45.9를, Cs₂V₄O₁₁는 b* 값(+: 황색도, -: 청색도)는 + 50.3을 나타내었으며, 45 이상의 L* 값(명도)을 가지고 있어, 밝고 화사한 느낌을 구현하기위한 황색안료로 응용이 가능할 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1429-1432
• /
• 2007

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.374-374
• /
• 2012

Nowadays, Active Matrix Organic Light-Emitting Diodes (AM-OLEDs) are the superior display device due to their vivid full color, perfect video capability, light weight, low driving power, and potential flexibility. One of the advantages of AM-OLED over Liquid Crystal Display (LCD) lies in its flexibility. The potential flexibility of AM-OLED is not fully explored due to its sensitivity to moisture and oxygen which are readily present in atmosphere, and there are no flexible encapsulation layers available to protect these. Therefore, we come up with a new concept of Inorganic-Organic hybrid thin film as the encapsulation layer. Our Inorganic layer is Al2O3 and Organic layer is F-Alucone. We deposited these layers in vacuum state using Atomic Layer Deposition (ALD) and Molecular Layer Deposition (MLD) techniques. We found the results are comparable to commercial requirement of 10-6 g/m2 day for Water Vapor Transmission Rate (WVTR). Using ALD and MLD, we can control the exact thin film thickness and fabricate more dense films than chemical or physical vapor deposition methods. Moreover, this hybrid encapsulation layer potentially has both the flexibility of organic layers and superior protection properties of inorganic layer.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.829-833
• /
• 1996

Superconducting YBaCuO thin films were deposited on MgO (100) single crystal substrate by rf reactive sputtering method. Sputtering target was prepared by mixing the original powders of $Y_2O_3$, $BaCO_3$, and CuO at $830^{\circ}C$, and its composition was $YBa_2Cu_{3.3}O_x$ adding the excess CuO to compensate for the loss of Cu in the deposition process. The sputtering conditions for a high quality of YBCO thin film were: substrate temperature of 13$0^{\circ}C$; gas pressure of 10 mTorr; gas mixture ($O_2$: Ar =10: 90); distance of 2.5 inch; and rf power density of 4.87 W /$\textrm{cm}^2$. The deposition rate was 2.4~2.6 nm/min. From the RBS results, it was found that Cu and Ba contents in thin films decreased with the increase of substrate temperature. The increase of gas pressure resulted in significant deficiency of Ba elements.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.362-366
• /
• 2011

Aluminosilicate inorganic polymer binder has been studied as an alternative to ordinary Portland cement due to its higher physical properties, chemical resistance and thermal resistance. This study has been carried out in an attempt to understand the hardening characteristics of aluminosilicate binder by varying the content of calcium. Samples with four different ratios of Al, Si, and Ca were synthesized in this study with the Al:Si:Ca mol ratio being 1.00:1.85~1.98:0.29~2.12. Furthermore, an alkali silicate solution was prepared with the sodium hydroxide (NaOH) and sodium silicate (NaSi). The hardening characteristics of the specimens were analyzed using XRD, SEM, and TG/DTA. In addition, compressive strength and sintering time of specimens were measured as a function of calcium content. The results showed that the specimen containing 2.12 mol% calcium offered the highest compressive strength. However, the compressive strength of the specimen containing 0.26 mol% calcium was lower relative to the other specimens. The results displayed a distinct tendency that as more calcium was added to the inorganic polymer, setting time became shorter. When calcium was added to the inorganic polymer structure, a second phase was not formed, indicating that the addition of calcium does not affect the crystalline structure.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.66-72
• /
• 2000

재래식 및 마이크로파 가열법으로 열처리된 $Li_2O_3-SiO_2$계 글라스의 핵 생성 및 결정화 거동을 열분석법(DTA), X-선 회절(XRD), 광학 현미경(OM) 및 전기 전도도의 측정으로 비교 조사하였다. 재래식 및 마이크로피로 열처리된 시료들의 조핵 온도와 최대 핵 생성 온도는 동일하게 각각 460~$500^{\circ}C$와 $580^{\circ}C$이었다. 한편, 재래식에 비하여 마이크로파로 열처리된 시료에서는 부피 핵 생성이 일어나려는 경향이 컸다. 재래식 및 마이크로파로 열처리된 시편들에서 결정의 성장 속도는 결정화 열처리 온도에 비례하여 증가하였지만, 마이크로파 열처리의 경우는 부피 핵 생성 경향 및 물질 확산 효과의 증대에 기인하여 결정 성장을 재래식 보다 빠르게 진행되었다. 재래식 및 마이크로파로 열처리된 시편들의 전기 전도도 값은 각각 1.337~2.299와 0.281~$0.911{\times}10^{-7}\Omega {\textrm}{cm}^{-1}$이었다.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.1-7
• /
• 2006

The three-dimensional structure of an inorganic crystal, $SmZn_{0.67}Sb_2$ (space group $P4/nmm,\;a=4.30(3){\AA}\;and\;c= 10.27(1){\AA}$), was refined by electron crystallography utilizing high voltage electron microscopy (HVEM). Effects of instrumental resolution, image quality, beam damage and specimen tilting on the structure refinement have been evaluated. The instrumental resolution and image quality were the most important factors on the final results in the structure refinement, while the beam damage and specimen tilting effects could be experimentally minimized or controlled. The average phase errors $({\Phi}_{res})$ for the [001], [100] and [110] HVEM images of $SmZn_{0.67}Sb_2$ were $10.1^{\circ},\;9.6^{\circ}\;and\;6.8^{\circ}$, respectively. The atomic coordinates of $SmZn_{0.67}Sb_2$ were consistent within $0.0013{\AA}{\sim}0.0088{\AA}$, compared to the X-ray crystallography data for the same sample.