• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.19-26
• /
• 2015

PURPOSES : This study intends to develop an inorganic soil pavement material using industrial by-products and to evaluate its applicability as a road pavement material. METHODS : In this study, a compressive strength experiment was conducted based on the NaOH solution molarity and water glass content to understand the strength properties of the soil pavement material according to the mixing ratio of alkali activator. In addition, the strength characteristic of the inorganic soil pavement material was analyzed based on the binder content. The performance of the soil pavement was evaluated by conducing an accelerated pavement test and a falling weight deflectometer (FWD) test. RESULTS : As a result of the soil pavement material test based on the mixture ratio of alkali activator, it was identified that the activator that mixed a 10 M NaOH solution to water glass in a 5:5 ratio is appropriate. As a result of the inorganic soil pavement materials test based on the binder content, the strength development increased sharply when the amount of added binder was over 300 kg; this level of binder content satisfied 28 days of 18 MPa of compression strength, which is the standard for existing soil pavement design. According to the measured results of the FWD test, the dynamic k-value did not show a significant difference before or after the accelerated pavement testing. Furthermore, the effective modulus decreased by approximately 50%, compared with the initial effective modulus for pedestrian pavement. CONCLUSIONS : Based on these results, inorganic soil pavement can be applied by changing the mixture proportions according to the use of the pavement, and can be utilized as road pavement from light load roads to access roads.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권2호
• /
• pp.33-40
• /
• 2017

In typical remediation practices, separate washing systems have to be applied to clean up the soils contaminated with both oil and heavy metals. In this study, we evaluated the efficiency of successive two-stage soil washing in removal of mixed-contaminants from soil matrix. Two-stage soil washing experiments were conducted using different combinations of chemical agent: 1) persulfate oxidation, followed by organic acid washing, and 2) Fenton oxidation, followed by inorganic acid washing. Persulfate oxidation-organic acid washing efficiently removed both organic and inorganic contaminants to meet the regulatory soil quality standard. The average removal rates of total petroleum hydrocarbons (TPH), Cu, Pb, and Zn were 88.9%, 82.2%, 77.5%, and 66.3% respectively, (S/L 1:10, reaction time 1 h, persulfate 0.5 M, persulfate:activator 3:1, citric acid 2 M). Fenton oxidation-inorganic acid washing also gave satisfactory performances to give 89%, 80.9%, 87.1%, and 67.7% removal of TPH, Cu, Pb, and Zn, respectively (S/L 1:10, reaction time 1 hr, hydrogen peroxide 0.3 M, hydrogen peroxide:activator 5:1, inorganic acid 1 M).

• 콘크리트학회논문집
• /
• 제25권3호
• /
• pp.261-269
• /
• 2013

이 연구에서는 산업부산물인 고로슬래그 미분말과 알칼리 활성화제(물유리, 수산화나트륨)를 사용하였다. 또한, 이를 활용하여 철근콘크리트 보에 적용하여 휨성능 평가를 하였다. 주요변수는 W/B, 알칼리 활성화제의 혼입비율, 혼화재의 종류 및 혼입유무로서 총 8개의 실험체를 제작하였으며, 재료 및 구조성능 평가를 위한 실험을 수행한 결과 다음과 같은 결론을 얻었다. 친환경 무기결합재 콘크리트는 초기 경화속도가 빠르며, 고강도 콘크리트의 가능성을 보였다. 또한, 이를 활용한 철근콘크리트 보는 기존 시멘트를 사용한 철근콘크리트 보와 유사한 거동과 파괴양상을 보였다. 친환경 무기결합재 콘크리트가 시멘트 콘크리트를 대체할 수 있는 기초연구로서 향후 건설소재 및 재료분야에 활용할 수 있을 것으로 사료되며, 이러한 특성을 바탕으로 콘크리트 2차 제품 생산과 구조부재를 PC화하여 활용할 경우 생산성 향상, 공기단축 등 효율이 상승될 것으로 보인다.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.216-222
• /
• 2010

Portland cement has been restricted in applications to ecological area because of its environmental harmfulness and the $CO_2$ emission during a production process. Geopolymer materials attract some attention as an inorganic binder due to their superior mechanical and eco-friendly properties. In this study, geopolymer-based cement was prepared by using aluminosilicate minerals (flyash, meta-kaolin) with alkaline-activators and its compressive strength with concentration of alkaline-activators was investigated. Aluminosilicate-based geopolymers were obtained by mixing aluminosilicate minerals, alkaline solution (NaOH or KOH with different concentration) and water-glass under the vigorous stirring for 20 min. Compressive strength after curing at $30^{\circ}C$ for 3 days increased with the concentration of alkaline-activator due to the enhanced polymerization of the aluminosilicate materials and dense microstructure. Aluminosilicate-based geopolymer cement using KOH as an alkaline-activator showed high compressive strength compared with NaOH activator. In addition, geopolymer cement using fly-ash as a raw material showed higher compressive strength than that of meta-kaolin.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.150-153
• /
• 2015

Recently, research on geopolymeric concrete that does not use cement as a binder has been actively investigated. Geopolymeric concrete is cement-free concrete. Masato, ocher and/or soil has been solidified into geopolymeric concrete by the reaction of specifically modified silicate as an alkali activator and inorganic binding materials such as blast furnace slag, fly ash or meta-kaolin, which is cured at room temperature to exhibit high compressive strengths. Based on the results, this study shows how geopolymeric concrete that uses specifically modified silicate and inorganic binding materials is implemented as eco-cement with no cement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.576-577
• /
• 2008

ZnS:Cu,Cl blue-green phosphors were prepared by conventional solid state reaction. Copper activator of different concentrations was doped into ZnS structure at two firing steps. The luminescence characteristics dependent on $Cu^{2+}$ doping concentration of the phosphors has been investigated for inorganic electroluminescent device.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 추계 종합학술대회 논문집
• /
• pp.139-140
• /
• 2014

최근 건선산업에서 문제점으로 지적되고 있는 것은 제조과정 중 이산화탄소를 다량 방생시키는 시멘트의 사용이다. 이는 알칼리활성 무기결합재로 대체함으로써 시멘트보다 이산화탄소 배출량을 저감할 수 있지만 고가의 알칼리 자극제를 다량 사용하기 때문에 경제적 측면 및 사용성을 고려하지 않으면 사용할 수 없기 때문에 이에 대한 대체재에 관한 연구가 필요한 실정이다. 이에 본 연구에서는 고로슬래그를 기반으로 하는 알칼리 활성 무기결합재에 알칼리 자극제의 사용량을 저감하기 위해 레드머드를 사용하고, 레드머드에 적합한 알칼리 자극제의 종류와 사용방법에 대하여 연구하고자 하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.65-66
• /
• 2012

The cement used in the construction industry of the manufacturing process, large amounts of the greenhouse gas, CO₂ and is currently being studied for cement substitutes that reduce greenhouse gas issue. Therefore, the this study as a replacement for cement industrial by-product of blast furnace slag, red mud, silica fume and alkali-activator, using only inorganic composites without high-temperature calcination process were manufactured. The waste gypsum board micro powder added to compensate for the shrinkage cracks, the compressive strength and flow, and length change characteristics were investigated. Consequently, The setting time was shortened as GB added And liquidity was reduced. GB 2%, 7 days curing the added strength of specimens was the highest. Came out, and change the length of the Plain least.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1907-1914
• /
• 2010

A novel catalytic kinetic method is proposed for the determination of Se(IV), Se(VI) and total inorganic selenium in water based on the catalytic effect of Se(IV) on the reduction of bromate by p-nitrophenylhydrazine at pH 3.0. The generated bromine, $Br_2$ or $Cl_2$ plus $Br_2$ in 0.1 M NaCl (or NaBr) environment efficiently decolorized Calmagite and the reaction was monitored spectrophotometrically at 523 nm as a function of time. In this indicator reaction, bromide acted as an activator for the catalysis of selenium (IV) and a reducing agent for selenium (VI) at pH 3.0, which allowed the determination of total selenium. The fixed time method was adopted for the determination and speciation of inorganic selenium. Under the optimum conditions, the calibration graph are linear in the range 1 - 35 ${\mu}gL^{-1}$ of Se(IV) for the fixed time method at $25^{\circ}C$. The detection limit based on statistical $3S_{blank}$/m-criterion was 0.215 ${\mu}gL^{-1}$ for the fixed time method (7 min). All of the variables that affect the sensitivity at 523 nm were investigated, and the optimum conditions were established. The interference effect of various cations and anions on the Se (IV) determination was also studied. The selectivity of the selenium determination was greatly improved with the use of the strongly cation exchange resin such as Amberlite IR120 plus. The proposed kinetic method was validated statistically and through recovery studies in natural water samples. The RSDs for ten replicate measurements of 5, 15 and 25 ${\mu}gL^{-1}$ of Se(IV) and Se(VI) was changed between 2.1 - 4.85%. Analyses of a certified standard reference material (NIST SRM 1643e) for selenium using the fixed-time method showed that the proposed kinetic method has good accuracy. Se(IV), Se(VI) and total inorganic selenium in environmental water samples have been successfully determined by this method after selective reduction of Se(VI) to Se(IV).

• 대한환경공학회지
• /
• 제33권10호
• /
• pp.774-781
• /
• 2011

지르코늄합금 튜브 제조공정은 튜브 산세 시 질산과 불산을 사용하고 있어 세척 시 발생되는 폐수의 주요 오염물질인 질산성질소와 불소성분을 제거하기 위한 폐수처리는, 1차 화학응집처리에 의한 불소성분 제거공정, 황산화탈질반응을 이용한 SOD (Sulfur Oxidation Denitrification)공법에 의한 독립영양탈질공정, 그리고 2차 화학응집처리공정으로 구성되어 있다. 본 연구에서는, 처리공정에서 불소의 농도가 황산화탈질공정(SOD)의 탈질반응에 미치는 영향과 황산화탈질반응을 유지하기 위한 최적 운전조건을 검토하였다. 황산화탈질 반응은 불소농도 20 ppm 이하에서 거의 영향을 주지 않았으며, NaOH로 pH를 조절하는 것보다 NaOH와 $NaHCO_3$를 혼합하여 pH와 알칼리도를 조절해주는 것이 질소제거당량을 높여주는 효과가 있는 것으로 나타났다. 또한, 황산화탈질미생물에 필요한 미량원소와 알칼리성분이 혼합된 미생물활성화제가 알칼리도를 보충해줄 뿐만 아니라 황산화탈질미생물의 성장과 증식에도 영향을 주었으며, 그 결과 무기계 산업폐수처리 시 필요한 주기적인 미생물 식종 없이 운전이 가능한 결과를 얻었다. 이상의 결과를 통해, 황산화탈질공법(SOD공법)이 산업폐수의 질산성질소제거에 매우 유용한 공법임이 확인되었으며, 미생물활성화제가 황산화탈질미생물의 활성화에 기여함이 밝혀졌다.