• Journal of Animal Science and Technology
• /
• v.52 no.4
• /
• pp.271-280
• /
• 2010

This study was conducted to investigate the effects of Aspergillus niger-derived multi-enzyme complex supplementation to feedrestricted lactating sows on performances, milk yield, blood profiles, and manure excretion as compared with ad libitum-fed sows without supplementation of enzyme. Fifty multiparous lactating Berkshire sows were allotted to 5 treatments of 10 sows per treatment during a 28-d lactation period and litter per sow was standardized to 9 suckling piglets. Treatments were ad libitum-fed sows without enzyme and feed-restricted sows supplemented with four increasing levels (0, 0.02, 0.04 and 0.08%) of multi-enzyme complex derived from Aspergillus niger. Blood samples from all sows were collected to determine serum metabolite concentrations before the morning feeding on d 27 of lactation. Litter body weight and a piglet weight at weaning, and litter weight gain significantly (P<0.05) increased with increasing levels of multi-enzyme complex, but there was no significant difference between ad libitum-fed sows without enzyme and feed-restricted sows supplemented with multi-enzyme complex. Body condition score and backfat depth at weaning significantly (P<0.05) increased as multi-enzyme complex level increased. Lactational backfat depth tended (P>0.05) to less decrease with increasing levels of enzyme complex. Serum inorganic phosphorus and non-esterified fatty acid concentrations significantly (P<0.05) increased with increasing levels of enzyme complex. Daily milk yield was not significantly different across treatments, but milk fat yield significantly (P<0.05) increased as multi-enzyme complex level increased. Manure output was significantly (P<0.01) higher for ad libitum-fed sows than for feed-restricted sows, but there was no significant difference among feed-restricted sows supplemented with increasing levels of multi-enzyme complex. Fecal phosphorus amount significantly (P<0.05) decreased with increasing levels of multi-enzyme complex. Feed costs of sows per litter weight gain were reduced by 1.25% to 9.67% with increasing levels of multi-enzyme complex as compared with ad libitum-fed sows without enzyme. The results indicated that multi-enzyme supplementation to feed-restricted lactating sows not only increased litter performances, but also was comparable to ad libitum-fed sows, resulting in reduced feed costs. Moreover, the reduction of fecal phosphorus amount with increasing levels of enzyme complex would contribute to the reduction of environmental pollution.

• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.99-104
• /
• 1976

Experiments were carried out to establish the effects of acids in neutralization after alkaline treatment of rice straw, with which cellulosic single cell protein can be produced by cellulose utilizing bacteria, Cellulomonas flavigena KIST 321, previously isolated by authors. Following results were obtained. 1. Rice straw as carbon source was pretreated with 10 volumes of 1 normality of NH$_4$OH or NaOH(NaOH/substrate：40％, and then washed with water or neutralized with H$_3$PO$_4$, H$_2$SO$_4$, HCl and CH$_3$COOH. Among the above mentioned methods, neutralization with H$_3$PO$_4$after alkaline treatment was proved to be the most effective on its digestibility and SCP production. Dry cell 12.28g/$\ell$ and 78％ digestibility were obtained. 2. When rice straw was treated with NaOH solution, the result suggested that the productibity of cell-mass was attained on treatment of rice straw with 6％ of NaOH (NaOH/substrate ratio) for 15～24hrs at room temperature. 3. When rice straw was treated with NaOH, a volume of water to substrate is adequate by two or three fold and the amount of NaOH can be economized up to 5％ for the weight of rice straw. 4. The steaming of rice straw at 121$^{\circ}C$ for 30min. in alkaline treatment of rice straw gave the similiar effectiveness to that at room temperature for 15～24hrs. and accelerated the sterilization of the substrate. 5. Finally, the level of inorganic phosphate in a medium was investigated. 11.2g of dry cell was produced at the concentration of 0.2％, phosphate (phosphorous level 0.04％) in medium even though treated rice straw was neutralized with HCI instead of H$_3$PO$_4$, and 12.2g/$\ell$ at the concentration of 0.3％ phosphate (phosphorous 0.04％) on neutralization with H$_2$SO$_4$.

• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.230-238
• /
• 1996

The experiment was carried out to find aromatic constituent composition of Codonopsis lanceolata species grown in the native(Mt. lrwol, Youngyang, Kyungpuk Province) and the cultivated(Andong, Kyungpuk Province) areas from 1994 to 1995. The results were as follows : Air temperature and soil temperature at the native area were lower to $2{\sim}3^{\circ}C$, and to $2^{\circ}C$ than the cultivated area. Organic matter contents of plant grown at the native area higher than that of plants at the cultivated area by 4.8%. Crude protein content was higher in plant grown at native area than the plant grown in wild area but in case of crude saponin, plants grown at wild area was higher than that of native area. For inorganic element contents. K content is much higher than in the domesticated area as compared with wild area above ten over. And other elements such as Cu, Mn, Na and Mg were not remarkably different in contents. In the free amino acid compositions, argine was highest compared with other free amino acids, and Arginine content was higher in dometicated area. Recovery yield of essential oil of wild species grown at the cultivated showed 0.005%, but domesticated species was 0.004%. But both species at the native area were the same by 0.004%. Although composition of aromatic constituents in the two areas and species varied, total aromatic constituent was 21 kinds. Most aromatic constituents were aliphatic alcohols such as 1-hexanol, eis-3-hexanol, and trans-2-hexanol occupied by approximately 90% over. But three constituets as amylalcohol, furfuryl acetate, and 2-methoxy-4-vinyl phenol(MVP) were detected only in domesticated species.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.107-116
• /
• 1998

In an effort to reduce artifically the residual pesticides on crop and soil by accelerated photolysis,some 40 among the naturally occurring and synthetic coumpound were screened for photosensitization and/or photocatalysis and six promising chemicals were selected.The fungicides and the four selected photosensitizers and/or photocatalyst (PS) were applied to each crop.The results obtained are summarized as follows. 1. The wavelengths of maximum absortion (${\lambda}$max) and the molar absorptivites (${\varepsilon}$max) of procymidone,vinclozolin,and carbendazim in acentone were all 209 nm and 853,854,and 8740 respectively. 2. Of the 40 naturally-occuring and synthetic compounds screened,six promising ones were selected and designated as PS-1 (aromatic ketone),PS-2(aromatic amine)PS-3(quinone) ,PS-4 (inorganic compound),PS-5(organic acid salt) and PS-6(semiconductor photocatalyst). 3. In the accelerated photolysis of pesticide in soil by applying PS ,procymidone was decoposed rapidly by virtue of PS-2,being 59% of the control 3 days after application. 4. The vinclozolin residue in soil was reduced to 71% and 21% of the control 1 and 15 days,respectively,after PS-2 application. 5. The photolysis of carbendazim in soil was not accelerated by any of the PS tested. 6. The pesticide residues on the crop were prominently reduced by PS application.The procymidone residue on tomato was reduced to 47% of the control 15 days after PS-1 application and that on red pepper reduced to 57% 15 days after PS-2 application. 7. Vincrozolin residus remaining on tomato 1 and 15 days after PS-2 application were 38% and 56% of the control whereas those on the red pepper were 82% and 64%,respectively. 8. PS-2 was the most effective for the accelerated photolysis of carbendazim residues remaining on tomato, whereas on red pepper, the four of PS tested were all effective, but did not make much difference between them. This might be due to the shielding of sunlight by the leaves of red pepper not to exert the photosensitizing effect of PS-2 to the full.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.47-53
• /
• 1999

Photosensitizing activities of some photosensitizers (PS) for the artificial diminution of pesticide residues on horticultural crops were investigated. Five fungicides, iprodione, bitertanol, chlorothalonil, myclobutanil, and dichlofluanid were sprayed on apple and cucumber, followed by the application of each selected photosensitizer, and the samples were collected 0, 1, 3, 7, 15 days after the photosensitizer application and analyzed for the residual amounts. Of the 40 photosensitizers tested, six selected on the basis of the eliminating effect of pesticide residues were PS-1 (aromatic ketone), PS-2 (aromatic amine), PS-3 (quinone), PS-4 (inorganic compound), PS-5 (organic acid salt), and PS-6 (semiconductor photocatalyst). The residual amount of iprodione after 15 days of the application of PS-1 was 74% of that of the control. For bitertanol, the residual amount after 15 days of the application of PS-1 accounted for 78% of that of the control. The residual amounts of chlorothalonil after 1 day of the application of PS-1 and PS-2 accounted for 56 and 54% of those of the control, respectively. The residual amounts of iprodione on cucumber after 3 days of the application of the photosensitizers PS-1 and PS-2 were 44 and 67% of those of the untreated control, respectively. For myclobutanil, the residual amount after 15 days of the application of PS-6 accounted for 45% of that of the control. In case of dichlofluanid, the residual amount after 3 days of the application of PS-1 accounted for 44% of that of the control. Based on the results, PS-1 turned out to be the most promising photosensitizer for the accelerated photodegradation of the above fungicides on apple and cucumber.

• Microbiology and Biotechnology Letters
• /
• v.35 no.2
• /
• pp.163-172
• /
• 2007

This study was designed to investigate that inorganic germanium $(GeO_2)$ did not exist in germanium-fortified yeast or obtained to non-detectable value by current analytical methods and equipments. For this purpose, we achieved $GeO_2$ qualitative analysis protocol which could be the scientific basis of the study. Since reddish brown precipitate was formed from the reaction of $GeO_2$ with 1 equiv $NaBH_4$, and dark brown precipitate was also formed from the reaction of $GeO_2$ with 2 equiv $NaBH_4$, $GeO_2$ was qualitatively analyzed by observing these particular colored-precipitates. Because no color change was showed from the reaction between $NaBH_4$ and $SiO_2$, the color change could be caused by charge transfer transition on Ge-O and B binding properties. The reaction between $NaBH_4$ and germanium-fortified yeast did not show any color change and precipitate formation which meant no $GeO_2$ existed in germanium-fortified yeast. The reaction between $NaBH_4$ and supernatant specimen collected from the outside of dialysis membrane (MWCO 1,200 dalton) did not show any color change and precipitate formation. Therefore, we considered that the both germaniums in and outside of the dialysis membrane were organic germaniums. Germanium-fortified yeast which was biosynthesized organic germanium can be applied not only as a new functional material for improving health, prevention and treatment of chronic degenerative diseases including cancers, and the regulation of immune system, but also as a new materials.

• Korean journal of applied entomology
• /
• v.24 no.2 s.63
• /
• pp.51-60
• /
• 1985

This paper was performed to study the nature of varietal resistance of some Korean-new rice cultivars to the brown planthopper (BPH), Nilaparvata lugens ($ST{\AA}L$). The rice cultivars tested were Cheongcheong, Gaya, Hangangchal, Samgang, Nampoong and Yeongpoong which have been reported as having resistant genes for the BPH. The check varieties were Jinheung, Sangpoong and Chucheong for susceptible and IR-36 for resistant. The factors studied were referred to the seedling responses, preference in feeding and oviposition of BPH, antibiosis (nymphal development, adult emergence and sex ratio, adult body weight, population build-up, feeding amount and amylase activity), and chemical composition (inorganic components, chlorophyll contents, cell wall components, amino acids and esterase isozymes) of leaf- sheath and/or roots of rice plants. In conclusion, the natures of varietal resistance of rice cultivars to the BPH were not only correlated with the resistant reaction of rice plant, but also they were related with the non preference in feeding and oviposition and those resistant cultivars had the antibiotic effects to the insects. Their antibiotic effects of rice cultivars to the BPH would be related with some of the chemical components of rice plants, such as the contents of magnesium oxide (MgO), and chlorophyll and the different esterase isozymes.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.94-98
• /
• 2008

To search functional biomaterials of citrus pressed cake, the chemical constituents were analyzed Moisture content of citrus pressed cake varied slightly with sampling time. Moisture, non-nitrogen compounds, crude protein, crude fat, and ash of citrus pressed cake were 82.23% 16.94% 1.27% 2.5%, 0.58% (all w/w) on average, respectively. The chemical composition of citrus pressed cake was more similar to the peel than to the flesh of Citrus unshiu var: miyakawa. The pH, acid content, and pectin content were 3.57, 0.43% (w/w) and 1.49% (w/w), respectively. The vitamin C content of peel of Citrus unshiu var. miyakawa was 87.1mg/100g, and was higher than the 46.4mg/100g of citrus pressed cake. Total carotenoids of citrus pressed cake, and the peel and flesh of Citrus unshiu var. miyakawa, were 512.2mg/kg, 2,649.5mg/kg, and 199.4mg/kg, respectively. Therefore, citrus pressed cake may be utilized as a natural source of pectin, flavonoids and carotenoids. The major inorganic elements of citrus pressed cake were 201.3mg/100g of K, 47.9mg/100g of Ca, 19.4/100g of P, and 17.8/100g of Mg. The major free sugar contents of citrus pressed cake were 3.05% (w/w) fructose, 2.91% (w/w) glucose, and 4.94%(w/w) sucrose. Total free sugar was 9.91% (w/w), corresponding to 58.5% of 1be non-nitrogen compounds. The main flavonoids of Citrus unshiuwere narirutin, hesperidin, and rutin. Neohesperidin and hesperetin were also detected in trace amounts. Themajor flavonoids of citrus pressed cake were hesperidin and narirutin, and the content of hesperidin was 194.6mg/100g.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.178-183
• /
• 1993

This study was carried out to investigate the contents of ash and inorganicelements in the herbaceous paeony roots collected from the markets of 9 regions in Korea. The contents of paeoniflorin ranged from 2.14% to 3.7%, and the average was 2.87%. The mean contents of ash was 4.2% and acid insoluble ash content was 0.55%. Total nitrogen of herbaceous paeony roots was 0.7%, phosphorus 0.69%, potassium 0.73%, calcium monoxide 1.02% and ferric oxide 82.15ppm respectively. The content of zinc ranged from 19.80ppm to 103.02ppm and the average was 34.59ppm ; this value showed some differences than other elements were, and the mean content of magnesium was 0.25%. The cadmium content showed 0.31ppm copper 4.95ppm, and plumbum 20.47ppm respectively. As above results, we could say that there was no health problems with local products, if we use a the herb medicine.