• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2004년도 춘계학술대회
• /
• pp.48-56
• /
• 2004

To perform R&D program, it is necessary to invest input factor(I/F). And these factor are converted to output factors(O/F) at the end of R&D program. Pee. reviewers evaluate output factors and produce evaluation grades(E/G). This paper try to analyze the relationship to I/F, O/F and E/G, According to the analysis results, the relation between I/F and E/G is as weak as the relation between O/F and E/G. The strength of relationship is relatively very strong in the relation between I/F and O/F

• 통상정보연구
• /
• 제9권4호
• /
• pp.3-19
• /
• 2007

The purpose of this paper is to study the pattern of interactive learning in strategic networks. Interactive learning is defined as the exchange and sharing of knowledge resources conducive to innovation between an innovator firm, its suppliers, and/or its customers. The strength of internal knowledge resources can either hamper or facilitate levels of interactive learning. We assume that more complex innovative activities urge firms to co-ordinate and exchange information between users and producers, which implies a higher level of interactive learning. To test our theoretical claims, we estimated the level of interactive learning of firms in strategic networks with: (1) their customers, (2) their suppliers. Theses analyses allow a comparison of the antecedents of interactive learning of firms participating in strategic networks. Our findings suggest that interactive learning with customers is positively affected by company's capabilities and value-created activities, and with supplies is positively affected by value-created activities and technology innovation centers.

• Fisheries and Aquatic Sciences
• /
• 제16권3호
• /
• pp.143-147
• /
• 2013

The influence of carrageenan addition on the gelatinization of salt-based surimi gels was investigated by measuring compressive properties and Hunter color scale values. Hydrocolloid kappa (${\kappa}$)-carrageenan at 0%, 0.2%, and 1.0% and NaCl (2% w/w), KCl (1.5% w/w), and a mixture of NaCl (2% w/w) and KCl (1.5% w/w), were added to Alaska pollock surimi. Gel compressive properties were assessed by measuring the breaking force and gel strength. The gelling property of ${\kappa}$-carrageenan-induced surimi gel was significantly increased by the incorporation of KCl rather than NaCl. The addition of ${\kappa}$-carrageenan increased the breaking force and gel strength of surimi gels. Gels with 1% ${\kappa}$-carrageenan and KCl had the highest breaking force and gel strength. The addition of ${\kappa}$-carrageenan caused an increase in the whiteness values of the surimi gels.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.181-190
• /
• 2006

This study was conducted to develop dry forming technology and evaluate the properties of dry formed paper made from Hw-BKP. A dry forming mold (DFM) was developed to observe the phenomena of dry forming and evaluate the properties of formed papers. To upgrade the DFM a dry forming system (DFS) was developed. This DFS was designed to improve the formation of dry formed papers and enhance the productivity of dry forming. Dry forming gave papers with greater bulk and opacity than wet forming. Tensile strength of dry formed paper was greater than that of conventional wet formed handsheet when they were made from the same dry disintegrated fibers. But tensile strength of conventional wet formed handsheet made from beaten fiber was much greater than that of dry formed paper made from dry disintegrated fibers. When solvent dried beaten fibers were used in dry forming, the tensile strength of dry formed papers reached 73.5% of the wet formed handsheets made from beaten fiber. It showed that dry forming has a significant potential in improving strength properties when proper preparation of fibers and appropriate humidification, pressing, and drying processes are employed.

• Asia pacific journal of information systems
• /
• 제23권1호
• /
• pp.87-106
• /
• 2013

In the service-oriented economy, knowledge and skills are considered core resources to secure competitive advantages and service innovation. Knowledge management capability, which facilitates to produce, share, accumulate and reuse knowledge, becomes as important as knowledge itself to create service value. Along with knowledge management capability, dynamic capability and operational capability are the key capabilities related to managing service delivery processes. Previous studies indicated that these three capabilities are related to service innovation. Although separately investigate the relationship between the three capabilities. The purpose of this study is 1) to define variables that have effects on service innovation including knowledge management capability, dynamic capability and operational capability, and 2) to empirically test to identify relationship among variables. In this study, knowledge management capability is defined as the capability to manage knowledge process. Dynamic capability is regarded as the firm's ability to integrate, build, and reconfigure internal and external competences to address rapidly changing environments. Operational capability refers to a high-level routine that, together with its implementing input flows, confers upon an organization's management a set of decision options for producing significant outputs of a particular type. The proposed research model was tested against the data collected through the survey method. The survey questionnaire was distributed to the managers who participated in an educational program for management consulting. Each individual who answered the questionnaire represented a knowledge based service firm. About 212 surveys questionnaires were sent via e-mail or directly delivered to respondents. The number of useable responses was 93. Measurement items were adapted from previous studies to reflect the characteristics of the industry each informant worked in. All measurement items were in, 5 point Likert scale with anchors ranging from strongly disagree (1) to strongly agree (5). Out of 93 respondents, about 81% were male, 82% of respondents were in their 30s. In terms of jobs, managers were 39.78%, professions/technicians were 24.73%, researchers were 12.90%, and sales people were 10.75%. Most of respondents worked for medium size enterprises (47,31%) in their, less than 30 employees (46.24%) in their number of employees, and less than 10 million USD (65.59%) in terms of sales volume. To test the proposed research model, structural equation modeling (SEM) technique (SPSS 16.0 and AMOS version 5) was used. We found that the three organizational capabilities have influence on service innovation directly or indirectly. Knowledge management capability directly affects dynamic capability and service innovation but indirectly affect operational capability through dynamic capability. Dynamic capability has no direct impact on service innovation, but influence service innovation indirectly through operational capability. Operational capability was found to positively affect service innovation. In sum, three organizational capabilities (knowledge management capability, dynamic capability and operational capability) need to be strategically managed at firm level, because organizational capabilities are significantly related to service innovation. An interesting result is that dynamic capability has a positive effect on service innovation only indirectly through operational capability. This result indicates that service innovation might have a characteristics similar to process innovation rather than product orientation. The results also show that organizational capabilities are inter-correlated to influence each other. Dynamic capability enables effective resource management, arrangement, and integration. Through these dynamic capability affected activities, strategic agility and responsibility get strength. Knowledge management capability intensify dynamic capability and service innovation. Knowledge management capability is the basis of dynamic capability as well. The theoretical and practical implications are discussed further in the conclusion section.

• 한국재료학회지
• /
• 제24권6호
• /
• pp.277-284
• /
• 2014

Using the spray pyrolysis process, nano-sized cobalt oxide powder with average particle size below 50 nm was prepared from cobalt chloride solution. The influences of the raw material solution on the properties of the powder formed examined. When the concentration of Co was low(20 g/L), the average particle size of the powder formed was roughly 20 nm, and the cohesion between these particles was significantly strong. When the concentration of Co increased to 100 g/L, the droplets nearly failed to exist in circular form and reflected a severely divided form. Furthermore, the average size of the particles formed was roughly 40 nm, and the particles reflected a polygonal form. When the solution was increased to nearly saturation level (Co at 200 g/L), the particle size distribution reflected significant unevenness due to severe droplet division while the surface also reflected significant unevenness. Furthermore, the average size of the particles formed increased significantly to 70 nm. The results of XRD analysis showed that the strength of the peaks reflected very little change when the concentration of Co was increased from 20 g/L to 50 g/L. Alternatively, when the concentration was increased to 100 g/L, the strength of the peaks increased compared to when the concentration was 50 g/L. However, when the concentration was increased to 200 g/L, the strength of the peaks failed to reflect significant change compared to when the concentration was 100 g/L. The specific surface area dramatically decreased by 30 % when the concentration of Co was increased from 20 g/L to 50 g/L. Alternatively, when the concentration of Co the solution increased to 100 g/L, the specific surface area decreased by roughly 15 %. Furthermore, when the concentration of Co was increased to nearly saturation level(200 g/L), the specific surface area decreased by roughly 35%.

• 터널과지하공간
• /
• 제30권3호
• /
• pp.214-225
• /
• 2020

쉴드 TBM(Tunnel Boring Machine) 터널 굴착 시 암반의 상태는 굴진 성능을 결정하는 중요한 요소 중 하나이다. 암석 강도는 지반조사 시 실내시험을 통해 얻을 수 있으나, 전체 TBM 굴진 구간에 대해 모두 알 수 없다. TBM 굴진 시 최적 Operation Parameter를 적용하기 위해서는 굴진 속도에 영향을 미치는 암석 강도를 파악하는 것이 매우 중요하다. 이에 본 연구에서는 TBM 굴착 중 생성되는 기계 데이터와 머신러닝(Machine Learning) 기법을 활용하여 암석 강도를 예측하고자 한다. 암석 강도를 예측하기 위해 여러 머신러닝 기법을 사용하여 비교하였고, 가장 예측 성능이 좋은 스태킹 모델을 최종 모델로 선택하였다. 암반 구간 Slurry 쉴드 TBM 굴진 사례에서 지반조사 및 시공 중 조사한 암석 강도와 강도를 획득한 위치에서의 TBM 굴착 데이터를 사용하였다. TBM 굴착 데이터는 Training과 Test용으로 8:2로 분할하였으며, 변수 선택(feature selection), 표준화(scaling), 이상치(outlier) 제거 등 전처리 과정을 수행하였다. 하이퍼파라미터 튜닝까지 마친 후, 스태킹 모델에 대해 평균 제곱근 오차(Root Mean Square Error, RMSE)와 결정 계수(R²)로 모델을 평가한 결과 각각 5.556과 0.943로 나타났으며, TBM 굴착 데이터로 암석 강도를 예측하는 모델로 유용할 것으로 판단된다.

• 경영정보학연구
• /
• 제7권1호
• /
• pp.257-274
• /
• 2005

인터넷의 폭발적인 발전으로 인터넷 기반 EDI의 구현이 활발해지고 있다. 인터넷 EDI는 EDI와 인터넷 기술의 장점을 결합한 기술로써 그 종류로는 FTP 기반의 EDI, SMTP/MINE 기반의 EDI, Web 기반의 EDI 등이 있다. 최근, 기존 VAN EDI의 높은 통신비용과 설치 및 유지보수비용 등의 한계를 극복하기 위해 Web EDI의 도입을 하고 있는 기업들이 증가하고 있다. 본 연구는 혁신특성과 거래 기업들 간의 관계를 나타내는 파트너쉽 특성 등이 Web EDI의 구현에 미치는 영향을 확인하기 위하여 국내 Web EDI를 사용하고 있는 기업들을 대상으로 실증연구를 하였다. 376명의 Web EDI 사용자에게 설문지를 발송했으나 실증분석에 사용된 유효한 설문지는 66부였다. 연구결과, 파트너쉽 요인 중 거래업체의 참여도와 상호의존도가 Web EDI 구현에 유의한 영향을 미치는 것으로 나타났으며, 혁신 요인 중 호환성, 상대적 이익, 비용절감이 Web EDI 구현에 유의한 영향을 미치는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.481-501
• /
• 2015

Current design codes and technical recommendations often provide rough indications on how to assess effective stiffness of Reinforced Concrete (R/C) frames subjected to seismic loads, which is a key factor when a linear analysis is performed. The Italian design code (NTC-2008), Eurocode 8 and ACI 318 do not take into account all the structural parameters affecting the effective stiffness and this may not be on the safe side when second-order $P-{\Delta}$ effects may occur. This paper presents a study on the factors influencing the effective stiffness of R/C beams, columns and walls under seismic forces. Five different approaches are adopted and analyzed in order to evaluate the effective stiffness of R/C members, in accordance with the scientific literature and the international design codes. Furthermore, the paper discusses the outcomes of a parametric analysis performed on an actual R/C building and analyses the main variables, namely reinforcement ratio, axial load ratio, concrete compressive strength, and type of shallow beams. The second-order effects are investigated and the resulting displacements related to the Damage Limit State (DLS) under seismic loads are discussed. Although the effective stiffness increases with steel ratio, the analytical results show that the limit of 50% of the initial stiffness turns out to be the upper bound for small values of axial-load ratio, rather than a lower bound as indicated by both Italian NTC-2008 and EC8. As a result, in some cases the current Italian and European provisions tend to underestimate second-order $P-{\Delta}$ effects, when the DLS is investigated under seismic loading.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권10호
• /
• pp.3858-3874
• /
• 2021

As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.