• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.323-328
• /
• 2015

PURPOSE. This in-vitro study was designed to evaluate retention forces, microleakage and plastic deformation of a prefabricated 2-implant bar attachment system (SFI-Bar, Cendres+$M{\acute{e}}taux$, Switzerland). MATERIALS AND METHODS. Two SFI implant-adapters were torqued with 35 Ncm into two implant analogues. Before the tube bars were finally sealed, the inner cavity of the tube bar was filled with liquid red dye to evaluate microleakage. As tube bar sealing agents three different materials were used (AGC Cem (AGC, resin based), Cervitec Plus (CP; varnish) and Gapseal (GS; silicone based). Four groups with eight specimens each were tested (GS, GS+AGC, AGC, CP). For cyclic loading, the attachment system was assembled parallel to the female counterparts in a chewing simulator. The mean retention forces of the initial and final ten cycles were statistically evaluated (ANOVA, ${\alpha}{\leq}.05$). RESULTS. All groups showed a significant loss of retention forces. Their means differed between 30-39 N initially and 22-28 N after 50,000 loading cycles. No significant statistical differences could be found between the groups at the beginning (P=.224), at the end (P=.257) or between the loss of retention forces (P=.288). Microleakage occurred initially only in some groups but after 10,000 loading cycles all groups exhibited microleakage. CONCLUSION. Long-term retention forces of the SFI-Bar remained above 20 N which can be considered clinically sufficient. The sealing agents in this study are not suitable to prevent microleakage.

• 복식
• /
• 제62권6호
• /
• pp.165-181
• /
• 2012

Alexander McQueen is a typical designer of unconventional and experimental design who showed maximalism through outstanding tailoring. The purpose of this research is to study formative characteristics of maximalism that are expressed in modern fashion based on the works of Alexander McQueen, and to suggest boundless possibilities of development through his sense of design and the expressive ability of his works. Theoretical considerations will be made through literature research and precedent studies, and the collection data for case analysis will be used to select ready-to-wear women's collections from 2001 S/S to 2010 F/W by referring to internet sites. The study results are as follows. First, the most representative characteristic of formative characteristics of maximalism expressed in Alexander McQueen's works is expandability. Second, decorations used as a part of detail on clothes is used as decoration itself, and handcraft expression is shown through excessive use of decorations. The expandability of decoration that emphasizes splendid magnificence is expressed through flawless technique. Third, the fusion of each different image and the combination of ethnic image and modern image was most prevalent. Fourth, fantasy expresses a fictive image that could not be seen in reality by expressing an unrealistic and maximized image through the imagination of designer. Fifth, experimental element is expressed as an image that actively reflects the challenging spirit, which suggests a new direction of beauty through shocking and extraordinary images of the inner world of the designer and the root of new ideas about inhumane modern society.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.231-239
• /
• 2013

This research developed a smart girdle for adult women in their 20's that has an inserted carbon weaving heater to help with relief from coldness and abdominal disease through the thermal insulation effect. A pocket of powernet fabric was attached to the inside of the girdle for the easy insertion and separation of the heating device, while the heating device was fixed to a mesh material by cotton yarn and was wrapped with elastic lining material to prevent the mechanical devices from being exposed. A set of 3 hooks was attached to the center of the back of the heating device in consideration of convenience and mobility. Whereas the switch was inserted into around the right waistband, and the battery into the inner pocket around the waist, to integrate the heating device with the girdle. The satisfaction and usability of the fabricated smart girdle was verified by having research participants wear it to evaluate the appearance change caused by the device, the inconvenience of wearing/unwearing, mobility, and the satisfactory functionality of the device. As a result, the grand mean was evaluated to be high, with appearance (4.19), mobility (4.17), and functionality (4.51) being higher than 4.00; which indicates that the heat generation function of the smart girdle is effective. It may be said that such collection and analysis of data that reflect users' opinions have value and significance in that they can be grafted onto future research on new technology as well as they contribute to taking a step forward in the rapidly increasing research of smart clothing, with the new-type clothing equipped with new function.

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2001년도 19th International Costume Association Congress
• /
• pp.81-81
• /
• 2001

R.O.C. has experienced successively the development of previous dynasties that creates out the unique traditional culture of each stage. The Chinese nation is not a one-fold race; each dynasty absorbs the culture of the outside race. It is Tang Dynasty blends mutually however yield unusually brilliant results. The Tang Dynasty's national strength is forceful and the economy is prosperous. Above all, social custom and current of thought both break the constraint of previous dynasties' conservative thinking and keep positive and aggressive. While in the contact with extraterritorial culture, not only changes the feminine social status, but also produces unprecedented innovation and reform on the feminine dress. The Tang Dynasty's varied feminine suit is affected by the western regions of China culture, such as expose of chest, low collar, short top garment and skirt with narrow sleeves or wide sleeves, sleeve gown with plate collar or turndown collar, man's wear, and military dress, etc. An epoch can be known by Tang Dynasty feminine dress's special features, for example, the make-up of Tang-Shien-lon's Uan-Ho period presents dress style of late Tang days. However, the Chinese people compete mutually pursuing the strange costume, and accepting different cultural incitement This reveals that the changes of popular culture would result in the big transform of the Tang's dress style. This paper studies inherit of Tang Dynasty's culture and east-spread of the western regions of China culture. While understanding the Tang's favor in the western regions of China customs, all follow the western regions of China without exception, such as dance music, painting, dress, food, amusement, etc. Because of emperor's progressive race policy and forgiveness attitude to the foreign tribe that makes Tang Dynasty's feminine dress much easier to accept and blend the special features of the foreign tribe culture. While joined with west culture, and pick the dress's essence of the western regions of China, the original possessed of culture consciousness and esthetic sense improve and create their own dress, as well as enrich more inner part of dress art and the spirit.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.70-73
• /
• 2002

Using zirconium ceramics makes the ferrule, which is the part of optical communications. The quality of optical communications is directly affected by the concentricity of the optic ferrule. The products of optic ferrule should be meet the following general conditions which are the outer diameter of 2.5mm and the inner diameter of 0.125mm, and high quality conditions which are the concentricity of 0.1~$0.3\mu\textrm{m}$, the form accuracy of $0.2\mu\textrm{m}$, the roundness and the cylindricity of $0.1\mu\textrm{m}$ and the surface roughness of 10nm. Generally, the diamond wheel is used for the high efficiency and precision grinding of the materials. It is good for keeping the shape as it has little wear. Because of the loading phenomena, however, it is difficult to keep the fresh surface of the wheel. In grinding process, grinding fragments resemble fine powders rather than chips. It can easily get attached to the wheel surface and thus cause a loading. The loading takes place, in which the impurities stick to the wheel surface, and the grinding characteristics of wheel is deteriorated. To prevent all of these, a suitable dressing method should be used for the wheel. In this research, the dressing system fur co-axial grinding machine was designed and produced for the machining of ferrule, which is a high performance part. The performance of the developed dressing system was evaluated by measuring the form accuracy of ferrule, which is machined by the dressed wheel in developed dressing system.

• 패션비즈니스
• /
• 제2권4호
• /
• pp.69-78
• /
• 1998

The purpose of this study was to identify the variables which could characteristics the New Young Generation (NYG), to investigate the relationship between level of NYG characteristics and information searching related to underwear purchasing, and the differences level of the NYG characteristics according to demographic variables (sex, grade, major), and examine the casual relationships of demographic variables (sex, place of growing background, parent's education) and level of the NYG characteristics on information searching related to underwear purchasing. The subjects were 723 college students (female = 324, male=398) living in Seoul and Kyuggi were participated in this study. The NYG is limited to person who born after 1970's. The result of this study were as follows; 1. Five factors of New Young Generation oriented characteristics were identified; F.1 'Info-telecommunication(Info-Telecom)'; F.2 'Family and Marriage'; F.3 'Consumption pattern'; FA 'Self-centered (Individualism)'; F.5 Work/Career oriented. 2. The relationship between the NYG characteristics and information search in underwear purchasing were significanted. 3. In demographic variables, gender, grade, and major were partially significant differences. 4. In male students, the result of the casual relationship between demographic variables with NYG characteristics and the level of the NYG in underwear purchasing showed that grade, background of grownplace, level of parent's education were significanted the high level of info-telecom factor associated with higher grade, city-grown, higher level of parent's education. In conclusion, the result showed that the level of NYG characteristics was significant to male students and specially for grade older students. The background of parent's education level was the another important variables to predicting the NYG characteristics. Finally the higher the NYG characteristics, the more information search in underwear purchasing.

• 한국의류학회지
• /
• 제38권5호
• /
• pp.611-626
• /
• 2014

Reading and foreseeing fashion trends is crucial and difficult in the fashion industry due to accelerated and diversified changes in fashion trends. We use network analysis to investigate fashion trends from 2004 to 2013 in order to find the inter-relevance among fashion trends. We extracted words from fashion trend info for women's wear provided by Samsung Design Net, created a 2-mode network of seasons and trend languages, and visualized this network using NodeXl program. Fashion trends repeated a unique pattern during the period. In the first half (2004-2008), retro modern, feminine modern, and ecological modern were dominant trends in consecutive order. The years 2009-2013 witnessed distinctive fashion trends in S/S seasons and in F/W seasons. 11F/W, 12F/W and 13F/W seasons were characterized by artistic creative style. From 2010, natural style dominated S/S seasons. 10S/S and 12S/S seasons were distinguished as a calm natural style that reflected a peaceful and simple life. In 11S/S and 13S/S seasons, soft natural style emerged as a sign of increased importance of inner spirit and natural energy. A seasonal reappearance of trends was observed every two years in S/S seasons that enabled the prediction that 14S/S will see another version of natural style. A macroscopic trend for the last 10 years was represented by the keywords 'modern' and 'natural'. 'Modern' involved the past styles such as 60's, Baroque and the origin of human life. 'Natural' was connected with design elements such as material, silhouette and color. Managerial implications and future study directions are discussed based on the results.

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1165-1174
• /
• 2004

The purpose of this study was to survey on the actual condition disposable coveralls of railroad rolling stock maintenance workers. The data were obtained from 100 male workers of railroad rolling stock maintenance wearing disposable coveralls using a questionnaire. The results were as follows. Disposable coveralls were exchanged into new ones in a week or 1-2 weeks. The major reasons of the exchanges were ＇Because it was contaminated(76.2%)＇ and then ＇It was torn(23.0%)＇ The response to the wearing frequency was the highest in ＇As possible as freqeuntly＇, and then ＇Sometimes＇ When workers were reluctant to wear the coveralls, the first reason was heat owing to wearing the coveralls. Therefore, wearing frequency became lowered in Summer. The torn parts of disposable coveralls most frequently were around the armhole and the crotch. The contaminated parts followed with the cuffs, the arm, and then the back. The uncomfortable parts were around the neck and the armholes. Workers felt uncomfortable because of heat and sweat caused by garment design obstructed convective airflow. Second, they complained that the coveralls make them irritated in a toilet. Third, they dissatisfied with materials of coveralls because the soils like oil were soaked into the coveralls and stained on the inner clothing. In regard of the color of coveralls, worker＇s favorite color was blue. In regard of style, the preferences to the separate style with a hood and the coveralls style with a hood were 49.0% and 25.0%, respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.424-426
• /
• 2008

초소형 가스터빈에 사용되는 소형 고속 구름베어링의 연료윤활 특성을 실험적으로 조사하였다. 윤활유로는 항공용 가스터빈에서 사용되는 MIL-PRF-7808 터빈오일과 항공용 가스터빈의 추진연료로 사용되는 JP-8 연료를 사용하여 운용특성을 비교하였고, 시험용 베어링으로는 내경 17 mm의 깊은 홈(deep groove) ball bearing과 내경 20 mm의 원통형(cylindrical) roller bearing을 사용하였다. 베어링의 연료윤활에 따른 특성을 비교하기 위하여 오일 및 연료를 공급하며 고속베어링 시험을 수행할 수 있는 시험 장치를 개발하여 하중, 냉각공기 온도, 윤활유량 및 회전속도를 변화시키면서 시험을 수행하였다. 30,000 rpm에서 70,000 rpm까지 회전속도를 변화시키면서 시험한 결과 깊은 홈 볼베어링은 축하중과 회전속도가 증가하는 경우 베어링 케이지에 마모가 발생하였으며 마모상태는 오일윤활보다 연료윤활시 마모가 더 많이 발생하였고 본 베어링의 속도한계인 59,000 rpm까지는 연료 윤활로 운용이 가능하다는 것을 확인할 수 있었다. 연료윤활의 경우가 오일윤활의 경우보다 베어링 온도가 더 낮은 것을 알 수 있었는데 이는 베어링의 냉각특성이 연료윤활인 경우가 오일윤활의 경우보다 더 좋기 때문이라 판단된다. 본 실험을 통하여 소형 항공용 가스터빈의 주축 베어링 윤활방식으로 연료윤활 방식이 적용 가능함을 확인할 수 있었다.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.87-93
• /
• 2019

This work aims to develop a dry lubricant for oilless bush, especially a solid lubricant, thereby creating a coating method with improved properties of anti-friction and load-carrying capacity without oil lubrication. In this work, spherical-shaped powders of thermosetting resin such as polyimide (PI) are mixed with a binder matrix obtained by mixing a fluorocarbon compound resin such as Polytetrafluoroethylene (PTFE) or Ethylene tetra fluoro ethylene (ETFE) with itself or with a non-fluorocarbon thermoplastic resin such as Polyether ether ketone (PEEK). And these dry lubricant mixtures are thickly coated (200-300 mm in the thickness) on the inner surface of the bush by using a wet-typed air-spray deposition method. It was found that the load-carrying capacity of the solid lubricant for excavator bush (60 mm in diameter) that operates under a high load condition (at 40 MPa) is greatly improved owing to the spherical-shaped powders of thermosetting resin. In addition, the coefficient of friction at the sliding surface is also reduced less than 0.1. Thick coating also lowers the contact stress at the edge of a bush that results in better tribological performances. The result suggests that the lubrication performance and durability life of the bush can be remarkably improved even without lubrication (oil or grease).