• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.99-104
• /
• 2003

This study investigated the yearly variation of pollutant loads outflowing from six watershed of Yeong-il Bay and compared the relationship of pollutant load and water quality, and estimated the Inner productivity of Yeong-Il Bay by using ${\Delta}COD$ method which analysis nonlinear process of water quality. As the estimated results for the pollutant loads of Yeong-Il Bay, total COD load outflowing from Hyeong-san river in flood season(summer) of 2001 year was 2275.0 kg/hr and in dry(low water) season(winter) 852.8 kg/hr, respectively. Load quantity in flood season was about 2.67 times than that in dry season. And as the calculated results of the net-flux of water for seven divisions, it showed that the net-flux of water increased for the divisions of the north coast and inner sea of Yeong-Il Bay but decreased for the south coast. On the contrary, for the cases which water quantity increase from land, the net-flux of water in estuary front of Hyeong-san river decreased but outflowing quantity of that though division of the south coast of Homi-got increased. Finally, this study compared the Inner productions for flood and dry season of Yeong-il Bay by using ${\Delta}COD$ method.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.149-155
• /
• 2016

The purpose of this study is to develop special tools used to extend the tool life for the boom of heavy equipment. The boom of heavy equipment is manufactured by cutting the inner and outer surface with respect to the assembly site essential. In particular, when cutting the inner surface, entry of the tool is difficult owing to the limited size of the inner diameter and non circular cutting. In addition, the productivity is poor because the use of the cutting tool made of the SKH material. Therefore, it is necessary to develop a special tool for machining heavy equipment boom to extend tool life and to improve productivity. The special tool developed this study has the form of a holder and tip. The tip was created by applying a commercially available tungsten carbide insert.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.320-323
• /
• 2002

This paper discusses process design of cold forging for inner tooth part, drum clutch. In respect to high productivity, low material consumption and low piece production costs, Metal forming has more merits than machining process. Net shape forming is huh technology which satisfies merits of metal forming and achieves high accuracy. Recently, net shape forming method widely applied because of high productivity, low material consumption and low piece production costs using press. In this study, the method which accuracy of drum clutch, automatic transmission pin, can be improved is discussed. First, process variables for process design of drum clutch are selected, and then process design is accomplished using forming analysis method. from forming analysis, forming load, stress, unfiling part is obtained. and comparing these results, optimal process design can be determined.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.49-54
• /
• 2005

Inner Structured and Bonded(ISB) panel, a kind of metallic sandwich panel, consists of two thin skin plates bonded to a micro-patterned inner structure. Its overall thickness is $1\~3mm$and it has attractive properties such as ultra-lightweight, high efficiency in stiffness-to-weight and strength-to-weight ratio. In many previous studies, resistance welding, brazing and adhesive bonding are studied for joining the panel. However these methods did not consider productivity, but focused on structural characteristics of joined panels, so that the joining process is very complicated and expensive. In this paper, a new joining process with resistance welding is developed. Curved surface electrodes are used to consider the productivity and the stopper is used between electrodes during welding time to maintain the shape of inner structure. Welding time, gap of electrodes and distance between welding points are selected as the process parameters. By measuring the tensile load with respect to the variation of welding time and gap of electrodes, proper welding conditions are studied. Welding time is proper between 1.5-2.5cycle. If welding time is too long, then inner structures are damaged by overheating. Gap of electrode should be shorter than threshold value fur joint strength, when total thickness of inner structure and skin plate is 3.3mm, the threshold distance is 3.0mm.

• 보건행정학회지
• /
• 제23권1호
• /
• pp.78-89
• /
• 2013

This study empirically analyze efficiency and productivity changes of public hospitals of Korea using data envelopment analysis/Window model and global Malmquist indices model. We use the ten-year data from 2001 to 2010 of 30 regional public hospitals listed database from the Association of Korean Regional Public Hospitals. The main focuses are to reveal whether the technical inefficiency are improved as time goes by, and efficiency and productivity are affected by environmental factors. The results can be summarized as follows. First, the efficiencies of public hospitals rise in trend as time passes. Second, regional public hospitals show the different average efficiencies according to their regional type, hospital type, operational type, medicaid type, and demand and supply conditions by Mann-Whitney U-tests. Third, technical efficiency changes mainly contribute to 4.4% annual average growth rate of productivity of regional public hospitals during that period. Our findings have some policy implications. It is confirmed that there exist some environmental inefficiencies, and those inefficiencies can not be overcome through just improving the inner management system. Thus, policy and institutional changes are necessary for regional public hospitals to improve efficiency and productivity overall.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.363-368
• /
• 2002

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; .Improved and guaranteed quality and reliability .Increased productivity and cost reduction. These results prove the system developed in this research to be suitable for automobile hub inspection.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.79-83
• /
• 2012

Inner part is used as an insulator in wire fuses. After injection molding, inner part has been showed flashes, filling defects and deformation. After production, operators have to cut off flashes, one by one. this process leads to continuous low productivity and loss of source materials. This study focuses on identifying the causes for flashes, filling defects, clamping force of injectors, mold adhesion, resin of liquidity and others, and on resolving those issues.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.49-55
• /
• 2022

Recently, the automobile industry has continued to demand lighter materials owing to international environmental regulations and increased convenience. To address this demand, aluminum parts have increased in popularity and are mainly developed and produced through hot forging and cold pressing. However, because this method has low yield and low production efficiency, a new manufacturing method is desirable. In this study, the water capacity efficiency of an aluminum inner tie rod socket was investigated using cold forging that provided a high yield and excellent production efficiency. Mechanical properties were derived through tensile testing of 6110A aluminum materials, and critical fracture factor and process analysis based on experimental data were carried out. The optimized process was applied as a prototype using cold multi-stage forging, and based on the derived results, the formability, productivity, and material efficiency of aluminum inner tie rod socket parts using this cold forging process was verified.

• 융합정보논문지
• /
• 제12권5호
• /
• pp.278-289
• /
• 2022

본 연구는 미용종사자의 업무가치감이 직무만족을 매개로 서비스 생산성에 미치는 영향을 실증적으로 분석한 연구이다. 연구결과 서비스 생산성에 영향을 미치는 요인을 실시한 결과는 업무가치감이 높고, 직무만족이 높을수록 서비스생산성이 높아짐을 알 수 있다. 또한 가치충족인식, 내재적만족, 업무가치인식, 자기가치인식, 외재적 만족이 높을수록 서비스생산성이 높아짐을 알 수 있었다. 또한 미용종사자의 업무가치감이 직무만족을 매개로 서비스향상에 미치는 영향을 알아본 결과 |Z|=15.057로 Z값이 1.96보다 큰 값을 보여 sobel test에서도 직무만족의 매개효과는 유의한 것으로 나타났다. 본 연구 결과를 토대로 미용종사들이 스스로 자신의 업무가 의미있고, 가치 있으면 보람되다고 인지할 수 있도록 내적동기를 상승시키고 일 자체에서 오는 만족감, 내재적 직무만족을 향상시킴으로서 서비스 생산성을 극대화 시킬 수 있을 것으로 기대한다.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3376-3382
• /
• 2014

전자내시경을 이용하여 양극처리된 알루미늄 실린더튜브 내면의 결함을 자동으로 검사하는 시스템을 개발하였다. 이 시스템은 크게 자동 결함검사 소프트웨어, 전자내시경 및 이송장치 등으로 구성되어 있다. 실험을 통하여 자동 결함검사의 최적검출 조건을 도출하여 실린더튜브 내면의 결함 검사에 적용한 결과 주요 결함 요소인 스크래치, 산화물, 라인, 웰드라인의 인식률을 99%로서 만족하였다. 자동 결함검사 시스템을 생산현장에 적용하면 기존의 육안 검사 시 작업자가 가지는 육체적인 피로도 줄여 작업효율을 증가시키며, 결함검출 자료를 바탕으로 제품의 품질을 향상시킬 수 있다.