• 한국의류학회지
• /
• 제40권3호
• /
• pp.516-525
• /
• 2016

Lumbar discs are one of the first parts of the musculoskeletal system to age in the human body. Lumbar disc for females start to age at twenty years of age and completely age between fifty and sixty. The number of lumbar herniated intervertebral disc patients are increasing rapidly; however, studies on protective inner wear are insufficient. This study was conducted to develop protective inner wear equipment that retains an aesthetic appreciation of the body. The methods and procedures of this study are as follows. First, foreign and domestic lumbar pads were researched and analyzed by visiting medical shops and internet shopping malls that sell lumbar pads. Second, the survey was conducted on forty patients with disc disease in hospitals located in Seoul and surrounding suburbs. The following are the study results and observations. First, the lumbar pads selling on the market had a variety of designs, textiles, and fabrics. The result of the research was to develop additional inner protective equipment for lumbar herniated intervertebral disc patients. Second, the survey results of the forty patients with disc disease were that housewives were the most vulnerable. All patients had experience purchasing lumbar pads. The prevention of pain and stress were the most selected responses for the motivation to buy lumbar pads. Most individuals said that they used lumbar pads for less than 1 year. Dissatisfaction came from fabric, activity and design. 'Being uncomfortable to wear' was the most common complaint. 'Protection and how easy the clothes were to wear' were the most selected for the necessity of developments. The Inner wear shape was the most selected in shape. Except for six respondents, all favored the lumbar protective inner wear design.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.43-50
• /
• 2013

This study is to clarify the characteristics and its change of spatial elements for community focused on the existing 22 old settlements in urban area of Cheongju. These community spaces are mainly divided into three parts, that is central space, inner road, and blind alley(cul-de-sac). The transitional characteristics of them are as follows. Firstly, the characteristics of central spaces is lasting, but the function is influenced by changing times. The function of central spaces located at the entrance to the village had been reduced to adjustments to modern lifestyle, and currently changed into senior citizen community center, supermarket, and public area. Secondly, as the width of the existing inner roads passed through old settlements had been extended, they are changed into pedestrian and traffic road, but the shape and function of them have been maintained. When new roads passed through old settlements had been established, the shape of old inner roads is disappeared, and the function of them is changed into byway and alley. Thirdly, cul-de-sacs of old settlements have tended to create a sense of community, but new cul-de-sacs formed by lot division have been only changed to passage. When new roads are established and cul-de-sacs are changed into alleys, the community between individual households is lost.

• 소성∙가공
• /
• 제10권3호
• /
• pp.193-199
• /
• 2001

Forming more than two parts of sheet metal in a single stamping operation lowers production costs, reduces weight, and heightens dimensional accuracy. The tailored blank (TB) is a laser-welded or mash-seam-welded sheet metal with different thicknesses, different strengths, or different coatings. Recently, automotive manufacturers have been interested in tailored blanks because of their desire to improve the rigidity, weight reduction, crash durability, and cost savings. Therefore the application to auto-bodies has increased. However, as tailored blanks do not behave like un-welded blanks in press forming operations, stamping engineers no longer rely on conventional forming techniques. Field try-outs are very important manufacturing processes for an economic die-making. In the field try-outs, the rounded geometries of tool and the drawbead shape and size in die face are generally modified when the forming defects can not be removed by the adjustment of forming process parameters. In this study, the field try-outs of tailored door inner panel are introduced and evaluated. The behaviours of laser tailored blank associated with different thickness combinations in the forming process of door inner panel are described focusing on terms of experimental investigations on the formability.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.195-204
• /
• 2017

Analytical and experimental studies of the innovative pipe in pipe damper have been recently investigated by the authors. In this paper, by adding lead or zinc infill or slit diaphragm inside the inner pipe, it is tried to increase the equivalent viscous damping ratio improving the cyclic performance of the recently proposed multi-level control system. The damper consists of three main parts including the outer pipe, inner pipe and added complementary damping part. At first plastic deformations of the external pipe, then the internal pipe and particularly the added core and friction between them make the excellent multi-level damper act as an improved energy dissipation system. Several kinds of added lead or zinc infill and also different shapes of slit diaphragms are modeled inside the inner pipe and their effectiveness on hysteresis curves are investigated with nonlinear static analyses using finite element method by ABAQUS software. Results show that adding lead infill has no major effect on the damper stiffness while zinc infill and slit diaphragm increase damper stiffness sharply up to more than 10 times depending on the plate thickness and pipe diameter. Besides, metal infill increases the viscous damping ratio of dual damper ranging 6-9%. In addition, obtained hysteresis curves show that the multi-level control system as expected can reliably dissipate energy in different imposed energy levels.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.309-310
• /
• 2006

This paper is about the development of surface inspection of bearing inner and outer race using machine vision. Before this system is developed, most inspections are performed by workers' naked eye. To improve both the inconvenience and incorrectness, another new tester is introduced. This system has the three sections mainly. First one is the mechanism section which transfers bearing manufactured from previous process line to the testing process in plant. Another is the inspection system which is composed of two parts: computer vision and measurement system using laser diode which inspects the defects of the bearing inner or outer race. The other is the pneumatic cylinder part controlled by Programmable Logic Controller(PLC). The system which is developed shows favorable results, and that has the advantage of convenience and correctness compared to previous system.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.66-73
• /
• 2012

A pressure compensated chamber of a pilot mining robot isolates and protects an electrical-electronic system from the ambient highly pressured water. Since the inner pressure of the chamber is compensated with outer water pressure using hydraulic oil and pressure compensator, there exists a pressure difference, less than 1 bar, between outer and inner surface. The structural safety of the chamber is obtained relatively easier than the canister type which inner pressure is kept as the atmospheric pressure. However, due to the adoption of box shape for space efficiency and usage of the transparent engineering plastic viewport for checking inner circumstance, the viewport can be largely deformed. This large deformation can cause an additional tensile force, called the prying force, to the bolt-flange connection parts of the viewport. In this paper, we suggest the structural design equation considering the prying action for designing the structure of a box-shape pressure compensated chamber.

• 원예과학기술지
• /
• 제28권4호
• /
• pp.593-599
• /
• 2010

6-7월, 8-9월, 10-11월, 12-4월(2007년) 및 5월(2008년)에 수확한 신선배추, 절임공정 및 김치 제조과정을 거친 배추를 겉잎과 속잎 부위로 나누어 anion-exchange column을 통과시키고 아세톤 침전법을 사용하여 제조한crude myrosinase로 반응시켜 total glucosinolates 함량을 분석하였다. 신선배추의 경우 6-7월 신선배추의 total glucosinolates 함량이 가장 높은 함량을 나타내었으며, 모든 수확기간에서 속잎보다 겉잎이 대체로 높은 것으로 나타났다. 가공처리 한 배추의 total glucosinolates 함량을 분석 한 결과, 절임배추의 경우 8-9월 절임배추에서 가장 높게 나타났으며, 5월 절임배추의 경우 다른 수확기간에 비해 낮은 함량인 것으로 분석되었다. 부위 별 절임배추의 total glucosinolates 함량은 6-7월 절임배추와 8-9월 절임배추의 경우 겉잎의 함량이 속잎의 함량 보다 높은 것으로 분석된 반면, 10-11월, 12-4월 및 5월 절임배추에서는 속잎의 함량이 높은 것으로 확인 되었다. 배추김치의 경우 6-7월, 8-9월 김치의 total glucosinolates 함량은 비교적 높은 함량을 나타내었으며, 5월 김치의 경우 다른 수확시기에 비해 낮은 함량인 것으로 측정되었다. 배추김치의 부위별 total glucosinolates함량은 5월 배추김치의 경우 속잎의 함량이 겉잎의 함량보다 높게 분석된 반면, 6-7월, 8-9월, 10-11월 배추김치의 경우 겉잎의 함량이 속잎의 함량보다 높은 것으로 분석되었다. 모든 수확기간에서 신선배추의 total glucosinolates 함량보다 가공 처리한 절임배추, 배추김치의 total glucosinolates 함량이 감소하는 경향을 볼 수 있었다. 이러한 분석 결과는 배추의 total glucosinolates 함량이 수확기간, 부위 및 가공처리에 따라 영향을 받는 것으로 사료되며, total glucosinolates 함량에 영향을 줄 수 있는 배추의 부위, 품종, 재배방법 및 재배환경(pH, 온도, 기후, 토양 등)은 고려 되어야 한다고 판단된다.

• 대한토목학회논문집
• /
• 제5권2호
• /
• pp.121-131
• /
• 1985

SWS-58 강재(鋼材)와 HT-80 강재(鋼材)를 모재(母材)로 한 등질(等質) 또는 연질용접연결(軟質鎔接連結)의 피로구열성특성(疲勞龜裂成特性)을 파면해석(破面解析)을 통(通)하여 검토(檢討)하여 표면(表面)에서 관측(觀測), 측정(測定)하는 피로구열성특성(疲勞龜裂成特性)의 공학적(工學的)인 응용성(應用性)이 높은 것을 탐지하였다. 또한 HT-80 강재(鋼材)의 용접부(鎔接部)는 포성파괴(胞性破壞)의 위험성(危險性)이 높은 것을 밝혔다. SWS-58 강재(鋼材)의 용접부(鎔接部)에는 줄무늬 모양이 발견되며, 줄무늬 간격은 da/dN 보다 높은 값을 표시(表示)하는데 이것으로 내부피로구열(內部疲勞龜裂)이 지그재그 방향(方向)으로 성장(成長)하는 것을 알 수가 있었다.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.150-157
• /
• 2003

In this paper, the large deformation of hollow silicon rubber gasket is treated. The frictional contact occurs between groove and the outer part of hollow gasket, and the frictional self-contact exists in the inner parts of hollow gasket. The silicon rubber has the nonlinear elastic behavior and its material property is approximately incompressible. Hence, the stress analysis requires an existence of a strain energy function, which is usually defined in terms of invariants or stretch ratio such as generalized Mooney-Rivlin and Ogden model. Considering large compressive deformation and friction, Mooney-Rivlin 3rd model and Coulomb's friction model are assumed. The numerical analysis is obtained by the commercial finite element program MARC. But, due to large deformation, the elements degenerate in the inner parts of hollow gasket. This means that the analysis of subsequent increments is carried out with a very poor mesh. In order to continue the analysis with a sufficient accuracy, it is necessary to use new finite element modeling by remesh. Experiments are also performed to show the validity of present method. As a conclusion, numerical results by this research have good agreements with experiments.

• 산업기술연구
• /
• 제28권B호
• /
• pp.39-45
• /
• 2008

Temperature variation according to space and time on the inner parts of engineering constructions(e.g.: dam, slope) can be a basic information for diagnosing their safety problem. In general, as constructions become superannuated, structural deformation(e.g.: cracks, defects) could be occurred by various factors. Seepage or leakage of water through these cracks or defects in old dams will directly cause temperature anomaly. Groundwater level also can be easily observed by abrupt change of temperature on the level. This study shows that the position of seepage or leakage in dam body can be detected by multi-channel temperature monitoring using thermal line sensor. For this, diverse temperature monitoring experiments for a leakage physical model were performed in the laboratory. In field application of an old earth fill dam, temperature variations for water depth and for inner parts of boreholes located at downstream slope were measured. Temperature monitoring results for a long time at the bottom of downstream slope of the dam showed the possibility that temperature monitoring can provide the synthetic information about flowing path and quantity of seepage of leakage in dam body.