• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.827-830
• /
• 2002

A direct numerical simulation is performed for turbulent heat transfer in a concentric annulus at $Re_{Dh}=8900\;and\;Pr=0.71$ for two radius ratios ($R_{1}/R_{2}=0.1\;and\;0.5$) and $q^{\ast}=1.0$. Main emphasis is placed on the transverse curvature effect on near-wall turbulent thermal structures. Near-wall turbulent structures close to the inner and outer walls are scrutinized by computing the lower-order statistics. The fluctuating temperature variance and turbulent heat flux budgets are illustrated to confirm the results of the lower-order statistics. The present numerical results show that the turbulent structures near the outer wall are more activated than those near the inner wall, which may be attributed to the different vortex regeneration processes between the inner and outer walls.

• International Journal of Fluid Machinery and Systems
• /
• 제8권4호
• /
• pp.304-310
• /
• 2015

Numerical simulation was applied to investigate the Taylor vortex flow inside the concentric cylinders with a constant radial temperature gradient. The reliability of numerical simulation method was verified by the experimental results of PIV. The radial velocity and temperature distribution in plain and 12-slit model at different axial locations were compared, and the heat flux distributions along the inner cylinder wall at different work conditions were obtained. In the plain model, the average surface heat flux of inner cylinder increased with the inner cylinder rotation speed. In slit model, the slit wall significantly changed the distribution of flow field and temperature in the annulus gap, and the radial flow was strengthen obviously, which promoted the heat transfer process at the same working condition.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.750-751
• /
• 2006

We investigated the mechanism how the high green density can be provided during die lubricated warm compaction (WD). We observed and analyzed the densification processes of iron powders including different contents of an inner lubricant, and measured the lateral pressure at the die wall during WD in comparison with conventional compaction and warm compaction. As a result, the high density in WD was due to not only the particles-deformation enhanced by warming powders but also the particles-rearrangement promoted by reducing an amount of the inner lubricant rather than the die lubrication.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.131-137
• /
• 2017

A cyclone is an effective tool to facilitate the collection of aerosol particles without using filters, and in cell exposure studies is able to collect a sufficient amount of aerosol particles to evaluate their adverse health effect. In this study, we examined two different methods to improve the aerosol particle collection efficiency of a cyclone. The individual and combined effects of reducing the surface roughness of the inner wall of the cyclone and of using a circular cone attachment were tested. The collection efficiency of particles of diameter $0.2{\mu}m$ was improved by approximately 10% when using a cyclone with a smoothened inner wall (average roughness $Ra=0.08{\mu}m$) compared with the original cyclone ($Ra=5.1{\mu}m$). A circular cone attachment placed between the bottom section of the cyclone and the top section of a collection bottle, resulted in improved collection of smaller particles without the attachment. The 50% cutoff diameter of the modified cyclone (combined use of smoothened inner wall and attachment) was $0.23{\mu}m$ compared to $0.28{\mu}m$ in the original model. The combined use of these two techniques resulted in improved collection efficiency of aerosol particles.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.110-117
• /
• 2016

It is a essential to minimize production of by-products for economically effective petrochemical process. In order to find key factor to achieve the effective process, 2-dimensional computational fluid dynamics considering a variety of physics such as convective and radiative heat transfer and thermal cracking of ethane are carried out. The reactor is modeled as an isothermal tube, whose length is 1.2 m and radius is 0.01 m, respectively. At first, the axial distribution of representative by-products in ethane thermal cracking are investigated in each inner wall temperature conditions. Then the comparison between concentration of propene($C_3H_6$) and ethane conversion is discussed with respect to inner wall temperature conditions too. Finally, both reaction rate and turbulent kinetic energy are used to identify the production mechanism of $C_3H_6$ under the intersection point in the plot for $C_3H_6$ molar concentration and ethane conversion.

• 한국분무공학회지
• /
• 제19권3호
• /
• pp.136-141
• /
• 2014

This study reports numerically the characteristics of dust scattering around the coal storage pile yards, substantially affected by the windbreak wall height. The dust scattering is closely associated with the frictional effect of wind flows as well as the pressure variation that consequently affect the dust particle behavior. In the present study, with the use of the commercial code of FLUENT, the distribution of wind velocity and pressure are predicted around coal storage pile yard for four different heights of the wind break wall. From the results, it was found that for the case 1 with the outer windbreak wall height of 3 m and inner windbreak wall height of 6 m, the amount of scattering dust for a year was estimated to be 1451 kg, whereas for the case 4 where a height of outer windbreak wall is 10 m and a height of inner windbreak wall is 16 m, the amount of scattering dust for a year was 358 kg. It shows that the dust scattering can be reduced by 75%, indicating important role of windbreak wall height on particle scattering. The numerical results would be useful in decision of the appropriate height of windbreak wall for decreasing the amount of scattering dust under various environmental conditions.

• 열처리공학회지
• /
• 제6권4호
• /
• pp.243-248
• /
• 1993

A Circulating Fluidized-Bed (CFB) with an internal nozzle and a partition wall was proposed. The technique of fluidization is related to operations first used commercially in the fields of metallurgical and mechanical engineering such as the heat treatment of metals and power station combustors. In the modified CFB, an internal nozzle and a partition wall were additionally set in the main bed. This cold mode CFB apparatus made of acrylic resin; the main bed is 1,500mm high and 100mm in the inner diameter, the internal nozzle is 130mm high and 10mm in the inner diameter, and the partition wall is 7mm thick and 100mm in the diameter. Glass beads of $89{\mu}m$ in the mean diameter were employed as bed materials.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.14-23
• /
• 1987

This study was carried out to investigate the anatomical characteristics, the radial and axial variation of the cell dimension and bulk density for four bamboo species used as the major material of bamboo products in Korea; Phyllostachys(P.bambusoides, P.edulis, P.nigra var.henonis, and Pnigra). The results obtained were summarized as follows; 1) In the outer part of culm, the mophological difference of cell diameter and distribution were not acknowledged. However, gum-like substance was occurred In the epidermis, hypodermis, cortex and metaxylem vessel of P.nigra, while it was occured only in the metaxylem vessel of P.edulis. 2) The protoxylem vessel in the central zone of culm-wall could be in the two types; the first type consisted of 4-5 small cell pieces occurred in P.edulis and P.nigra var. henonis, the second type of 1-2 large cell pieces in P.bambusoides and P.nigra. And transition of cell diameter from the vascular bundle sheath to the ground tissue was gradually enlarged in P.nigra and P.edulis but abruptly in P.bambusoides and P.nigra var. henonis. 3) Thin-wall tyloses were well developed in the outer and central zone of culm-wall in four species. 4) Compared with the central part of culm-wall, the number of parenchyma cells and the amount of the vascular bundle sheaths per unit area were a few in the inner part. The inner part nearest to the pith cavity was consisted of thick-well parenchyma cell. 5) The dimensional variations of metaxylem vessel and parenchyma cell in the radial direction were decreased from the inner part to the epidermis in all species observed. 6) The fiber length was the maximum in the central zone and its diameter was increased from the inner part to the outer part. In the axial variation. fiber length was slightly increased from the base and then decresed slowly toward the top, and its diameter was reverse. 7) The axial variation of the bulk density was continuously increased from the base toward the top and its radial variation was rapidly increased from the inner part to the epidermis.

• 대한기계학회논문집B
• /
• 제37권11호
• /
• pp.991-998
• /
• 2013

본 연구에서는 $6Ra=10^6$ 일 때, 사각 밀폐계 내부에 고온의 원형 실린더가 존재하는 자연대류에 대한 수치해석을 수행하였다. 밀폐계는 상부 벽면을 통해 냉각되고 양측 벽면과 고온의 국소 영역을 제외한 하부 벽면은 단열 조건이다. 하부 벽면에서 고온 영역이 차지하는 비를 w 로 정의 하였다. 반경이 밀폐계 한 변의 길이의 0.2 배인 원형 실린더를 구현하기 위해 유한체적법(FVM)에 기초한 가상 경계법(IBM)을 사용하였다. 본 연구에서는 w 가 고온의 원형 실린더를 갖는 밀폐계 내부의 자연대류에 미치는 영향을 $10^6$의 Rayleigh 수에 대해 2 차원 해를 구하였다. $10^6$의 Rayleigh 수에서는 유동장과 온도장은 시간에 따라 변하는 특성을 보였다.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.169-174
• /
• 2011

짧은 바깥쪽 탄소 나노튜브를 가진 이중벽 탄소 나노튜브 공진기의 경우, 자유로운 끝은 긴 안쪽 벽의 진동에 중요한 역할을 한다. 짧은 안쪽 탄소 나노튜브를 가진 이중벽 카본 나노튜브 공진기의 경우, 안쪽은 부드러운 코어로 작동하여 기본 주파수가 이들의 길이에 의해 영향을 받는다. 본 논문에서는 서로 다른 길이를 가지고 나노튜브로 구성된 이중벽 탄소 나노튜브 공진기의 주파수 변화를 분석한다. 분석 결과, 안쪽 혹은 바깥쪽 탄소 나노튜브 길이를 제어하는 다양한 주파수 소자를 구현하는데 널리 응용될 수 있을 것으로 판단된다.