• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2001.12a
• /
• pp.39-74
• /
• 2001

The endeavors enhancing the grain quality of high-yielding japonica rice were steadily continued during 1980s∼1990s along with the self-sufficiency of rice production and the increasing demands of high-quality rices. During this time, considerably great, progress and success was obtained in development of high-quality japonica cultivars and qualify evaluation techniques including the elucidation of interrelationship between the physicochemical properties of rice grain and the physical or palatability components of cooked rice. In 1990s, some high-quality japonica rice caltivars and special rices adaptable for food processing such as large kernel, chalky endosperm aromatic and colored rices were developed and its objective preference and utility was also examined by a palatability meter, rapid-visco analyzer and texture analyzer. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice and the palatability of cooked rice. The water/rice ratio (in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was average to 2.63(in v/v basis). The major physicochemical components of rice grain associated with the palatability of cooked rice were examined using japonica rice materials showing narrow varietal variation in grain size and shape, alkali digestibility, gel consistency, amylose and protein contents, but considerable difference in appearance and torture of cooked rice. The glossiness or gross palatability score of cooked rice were closely associated with the peak. hot paste and consistency viscosities of viscogram with year difference. The high-quality rice variety “Ilpumbyeo” showed less portion of amylose on the outer layer of milled rice grain and less and slower change in iodine blue value of extracted paste during twenty minutes of boiling. This highly palatable rice also exhibited very fine net structure in outer layer and fine-spongy and well-swollen shape of gelatinized starch granules in inner layer and core of cooked rice kernel compared with the poor palatable rice through image of scanning electronic mcroscope. Gross sensory score of cooked rice could be estimated by multiple linear regression formula, deduced from relationship between rice quality components mentioned above and eating quality of cooked rice, with high Probability of determination. The ${\alpha}$ -amylose-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, shelved the relatively fast deterioration of cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogiadation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked rice. The softer gel consistency and lower amylose content in milled rice revealed the higher ratio of popped rice and larger bulk density of popping. The stronger hardness of rice grain showed relatively higher ratio of popping and the more chalky or less translucent rice exhibited the lower ratio of intact popped brown rice. The potassium and magnesium contents of milled rice were negatively associated with gross score of noodle making mixed with wheat flour in half and the better rice for noodle making revealed relatively less amount of solid extraction during boiling. The more volume expansion of batters for making brown rice bread resulted the better loaf formation and more springiness in rice bread. The higher protein rices produced relatively the more moist white rice bread. The springiness of rice bread was also significantly correlated with high amylose content and hard gel consistency. The completely chalky and large gram rices showed better suitability for fermentation and brewing. Our breeding efforts on rice quality improvement for the future should focus on enhancement of palatability of cooked rice and marketing qualify as well as the diversification in morphological and physicochemical characteristics of rice grain for various value-added rice food processings.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.38-45
• /
• 2006

The thermal filter press dewatering(TFPD) technology to improve the dewaterability through increasing the inner vapor pressure, lowering the filtration viscosity and forming the porosity easily within cake as applying the heat at the sludge layer was developed in this study. The hot water with temperature of $95^{\circ}C$ and pressure of $1.2kg_f/cm^2$ was supplied to the heating plate equipped between filter plates with plate size of $470{\times}470mm$ and material of polypropylene. Sludge was dewaterd by supplying pressure of $5kg_f/cm^2$ and then by squeezing pressure of $15kg_f/cm^2$. As a results of estimating the characteristics of thermal dewatering to consider the initial water content and organic content to be influenced by a period of water shortage and rainwater, the dewatered cake water content was about 35 wt% and dewatering velocity was $4DSkg/m^2{\cdot}hr$ under the rainwater period, and the dewatered cake water content was about 50 wt% and dewatering velocity was $1.5DSkg/m^2{\cdot}hr$ in the case of sludge of water shortage season. These results was superior to the mechanical dewatering performance with water content of 70wt% and dewatering velocity of $0.9DSkg/m^2{\cdot}hr$. On the base of the results of TFPD, energy consumpted to deal with DS(Dry Solid) of 1kg was estimated by 300 kJ. It was analyzed that the energy consumption of TFPD was decreased about one third with comparison to the dryer system. Dewatering velocity of this technology was faster than the one of mechanical dewatering equipment and it was easier to product low water content cake. Therefore, this technology was recognized that dewaterability was predominant because of the fast of dewatering velocity and production of low water content cake, and also this known as economical efficiency was excellent because of low energy consumption in comparison with dryer.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.78-91
• /
• 2018

In order to understand the distributions of organic matter and heavy metal concentrations in the surface sediment of Jaran Bay, we measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in surface sediments collected at 15 stations in this bay in November 2014. The sediment consisted of finer sediment such as mud and clay, with 8.6-9.8Ø($9.3{\pm}0.3$Ø) of mean grain size. The concentrations of TOC and TN in the sediment ranged from 1.51-2.39 % ($1.74{\pm}0.22%$) and 0.20-0.33 % ($0.23{\pm}0.03%$), respectively, and did not show spatial difference. The carbon to nitrogen ratio (C/N ratio) ranged from 5-10, indicating that organic matter in the sediment originated from oceanic sources such as animal by-products from fish and shellfish farms. The concentrations of Cr, Fe, and Mn were much higher in the mouth of the bay than in the inner bay, and the concentrations of As, Cd, Cu, Hg, Pb, and Zn showed an opposite distribution pattern. Based on the results of the sediment quality guidelines (SQGs), enrichment factor (EF), geoaccumulation index ($I_{geo}$), pollutant load index (PLI), and ecological risk index (ERI), the surface sediment in Jaran Bay is not polluted or only slightly polluted with Cd, Cr, Cu, Hg, Pb, and Zn, whereas it is moderately to strongly polluted with As. In particular, some regions in the bay were identified as having a considerable risk status, indicating that metal concentration in the sediment could impact benthic organisms. Thus, the systematic management for marine and land sources of organic matter and heavy metals around Jaran Bay is necessary in order to ensure seafood safety and maintain sustainable production on shellfish farms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.413-433
• /
• 1994

Jinhae Bay once was a productive area of fisheries. It is, however, now notorious for its red tides; and oxygen deficient water-masses extensively develop at present in summer. Therefore the shellfish production of the bay has been decreasing and mass mortality often occurs. Under these circumstances, the three-dimensional numerical hydrodynamic and the material cycle models, which were developed by the Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the oxygen depletion and also to evaluate the environment capacity for the reception of pollutant loads without dissolved oxygen depletion. In field surveys, oxygen deficient water-masses were formed with concentrations of below 2.0mg/l at the bottom layer in Masan Bay and the western part of Jinhae Bay during the summer. Current directions, computed by the $M_2$ constituent, were mainly toward the western part of Jinhae Bay during flood flows and in opposite directions during ebb flows. Tidal currents velocities during the ebb tide were stronger than that of the flood tide. The comparision between the simulated and observed tidal ellipses showed fairly good agreement. The residual currents, which were obtained by averaging the simulated tidal currents over 1 tidal cycle, showed the presence of counterclockwise eddies in the central part of Jinhae Bay. Density driven currents were generated southward at surface and northward at the bottom in Masan Bay and Jindong Bay, where the fresh water of rivers entered. The material cycle model was calibrated with the data surveyed in the field of the study area from June to July, 1992. The calibrated results are in fairly good agreement with measured values within relative error of $28\%$. The simulated dissolved oxygen distributions of bottom layer were relatively high with the concentration of $6.0{\sim}8.0mg/l$ at the boundaries, but an oxygen deficient water-masses were formed within the concentration of 2.0mg/l at the inner part of Masan Bay and the western part of Jinhae Bay. The results of sensitivity analyses showed that sediment oxygen demand(SOD) was one of the most important influence on the formation of oxygen depletion. Therefore, to control the oxygen deficient water-masses and to conserve the coastal environment, it is an effective method to reduce the SOD by improving the polluted sediment. As the results of simulations, in Masan Bay, oxygen deficient water-masses recovered to 5.0mg/l when the $50\%$ reduction in input COD loads from Masan basin and $70\%$ reduction in SOD was conducted. In the western part of Jinhae Bay, oxygen deficient water-masses recovered to 5.0mg/l when the $95\%$ reduction in SOD and $90\%$ reduction in culturing ground fecal loads was conducted.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.213-226
• /
• 2011

In global supply chain, the scheduling problems of large products such as ships, airplanes, space shuttles, assembled constructions, and/or automobiles are complicated by nature. New scheduling systems are often developed in order to reduce inherent computational complexity. As a result, a problem can be decomposed into small sub-problems, problems that contain independently small scheduling systems integrating into the initial problem. As one of the authors experienced, DAS (Daewoo Shipbuilding Scheduling System) has adopted a two-layered hierarchical architecture. In the hierarchical architecture, individual scheduling systems composed of a high-level dock scheduler, DAS-ERECT and low-level assembly plant schedulers, DAS-PBS, DAS-3DS, DAS-NPS, and DAS-A7 try to search the best schedules under their own constraints. Moreover, the steep growth of communication technology and logistics enables it to introduce distributed multi-nation production plants by which different parts are produced by designated plants. Therefore vertical and lateral coordination among decomposed scheduling systems is necessary. No standard coordination mechanism of multiple scheduling systems exists, even though there are various scheduling systems existing in the area of scheduling research. Previous research regarding the coordination mechanism has mainly focused on external conversation without capacity model. Prior research has heavily focuses on agent-based coordination in the area of agent research. Yet, no scheduling domain has been developed. Previous research regarding the agent-based scheduling has paid its ample attention to internal coordination of scheduling process, a process that has not been efficient. In this study, we suggest a general framework for agent-based coordination of multiple scheduling systems in global supply chain. The purpose of this study was to design a standard coordination mechanism. To do so, we first define an individual scheduling agent responsible for their own plants and a meta-level coordination agent involved with each individual scheduling agent. We then suggest variables and values describing the individual scheduling agent and meta-level coordination agent. These variables and values are represented by Backus-Naur Form. Second, we suggest scheduling agent communication protocols for each scheduling agent topology classified into the system architectures, existence or nonexistence of coordinator, and directions of coordination. If there was a coordinating agent, an individual scheduling agent could communicate with another individual agent indirectly through the coordinator. On the other hand, if there was not any coordinating agent existing, an individual scheduling agent should communicate with another individual agent directly. To apply agent communication language specifically to the scheduling coordination domain, we had to additionally define an inner language, a language that suitably expresses scheduling coordination. A scheduling agent communication language is devised for the communication among agents independent of domain. We adopt three message layers which are ACL layer, scheduling coordination layer, and industry-specific layer. The ACL layer is a domain independent outer language layer. The scheduling coordination layer has terms necessary for scheduling coordination. The industry-specific layer expresses the industry specification. Third, in order to improve the efficiency of communication among scheduling agents and avoid possible infinite loops, we suggest a look-ahead load balancing model which supports to monitor participating agents and to analyze the status of the agents. To build the look-ahead load balancing model, the status of participating agents should be monitored. Most of all, the amount of sharing information should be considered. If complete information is collected, updating and maintenance cost of sharing information will be increasing although the frequency of communication will be decreasing. Therefore the level of detail and updating period of sharing information should be decided contingently. By means of this standard coordination mechanism, we can easily model coordination processes of multiple scheduling systems into supply chain. Finally, we apply this mechanism to shipbuilding domain and develop a prototype system which consists of a dock-scheduling agent, four assembly- plant-scheduling agents, and a meta-level coordination agent. A series of experiments using the real world data are used to empirically examine this mechanism. The results of this study show that the effect of agent-based platform on coordinated scheduling is evident in terms of the number of tardy jobs, tardiness, and makespan.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.407-414
• /
• 2013

This study was carried out to understand the physiological characteristics of 'Manpungbae' (Pyrus pyrifolia Nakai) pears through the seasonal changes of pericarp structure and anatomical differences between bagging and non-bagging treatment, and also fruit quality and peel coloration characteristics at the harvest time. The pericarp at full bloom was consists of outer epidermis, hypodermis, parenchyma cell, and inner epidermis from the exterior. The cell layers from the outer epidermis to vascular bundle increased rapidly 7-10 layers to 18-26 layers from full bloom (FB) to 77 days after full bloom (DAFB) and did not change significantly until maturity. Thus, the cell division period of 'Manpungbae' pear was until 77 DAFB and during this period, the thickness from hypodermis to vascular bundle increased from $73.1{\mu}m$ to $195{\mu}m$ in this period. Stone cells were formed from seven to 21 DAFB and stone cell clusters were formed around 49 DAFB. The cork cell layer was formed between 49 and 77 DAFB. 'Manpungbae' fruit pericarp was consists of 4.5 layers of the cork cell layers and seven layers of hypodermis which has the tannin at harvest time (161 DAFB). Comparison of the fruit enlargement and fruit structure development by bagging or non-bagging showed that 'Manpungbae' fruits without bagging had more than three cork cell layer than those with bagging at maturity. The size of stone cell clusters were varied in two treatments. Fruit weight was higher in the non-bagging treatment but there was no difference in soluble solid contents (SSC) between two treatments. The weight of the 'Manpunbae' fruit was distributed from 301 g to more 900 g and the average fruit weight was 677.2 g at harvest time, and fruits in the range of 551-800 g accounted for 71.6% of total production. The SSC, acidity and SSC/acidity ratio was $10.2-12.1^{\circ}Brix$, 0.10-1.24% and 9.76-14.31 respectively, and the SSC was higher in bigger fruit which had a very higher positive correlation with a fruit weight. However, the fruit firmness tended to be lower with fruit size which had a very higher negative correlation with the fruit weight and SSC. The cork cell layer numbers between yellowish brown and green pericarp were not different significantly, in 3.8 and 3.5 respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.794-803
• /
• 1997

Long line suspended culture of oysters has been started commercially in Hansan-Koje Bay since 1969. However, its Annual production has been decreased and culturing periods extended in recent years. So, we investigated environmental parameters and food organisms to identity the causes of poor fatness of oysters in Hansan-Koje Bay from February to November, 1994. As the result, the Water quality of Hansan-Koje Bay was found to be good for culture. For example, the mean concentration of COD was $1.35mg/\ell$, phosphate phosphorus was $0.30{\mu}g-at/\ell$ and dissolved inorganic nitrogen was $4.68{\mu}g-at/\ell$. However, the Hwado island and the inner part of the Hansan-Koje Bay were found to be eutrophicated due to various contaminants transported by land-based activities. But in the central pan of the Hansan-Koje Bay where the oyster farms Have been developed densely, the level of nutrient concentration was very low. During the study period, the dominant species of phytoplankton was Chaetoceros spp. with the percentage of $72.6\%\~87.8\%$ and the mean values of Chlorophyll-a concentration and phytoplankton standing crops were $2.05mg/m^3\;and\;188ind./m\ell$, respectively. The distribution of these parameters also showed similar trends those of nutrients. Especially, chlorophyll-a contents was very low with the concentration of below $0.5mg/m^3$ at central part of the Bay, Juklimpo. The fatness of oysters and the eutrophic index in this area were $18.1\%$ and 0.54, respectively. These values were lower than those of other culturing farms in the southern coastal areas in Korea. Therefore, we estimated that the insufficient food supply due to the low level of nutritional status was the major factors affecting the poor fatness of the Pacific oysters in Hansan-Koje Bay.

• Journal of fish pathology
• /
• v.2 no.2
• /
• pp.53-70
• /
• 1989

An ovarian parasite, Marteilioides chungmuensis of the Pacific oyster, Crassostrea gigas has been observed on several occasions in the Pacific sector of production of this oyster species(Matsuzato et al., 1977 ; Chun, 1979). This study was carried out on the specimens collected at Hwado, Och'$\check{o}$n, and Sinchang respectively located the southern, western, and eastern coasts of Korean Peninsula from 1986 through 1988 to investigate M. chungmuensis to the Pacific oyster. Uitrastructural studies were also carried out on infected oysters, to allow detailed examination of the structure and consepuently the systematic position of this parasite. Infection rates of M. chungmuensis at Hwado and Och'$\check{o}$n oyster farms were 5.3% and 4.2% each in 1986, 6.7% and 2.8% each in 1987, but they were not found at Sinchang oyster habitat. M,. chungmuensis-infected oysters were found from June to November at Hwado and from June to October at Och'$\check{o}$n. Twenty five of three hundred oysters transplanted from Sinchang to Hwado were found infected with M. chungmuensis. Some abnormal eggs infected with M. chungmuensis are liberated through the gill together with normal mature eggs on the spawning and the rest remain necrotized after spawning season. The earliest known stages consist of a stem cell or primary cell, including a secondary cell in which ovoid haplosporosomes are found. During sporulation, 2 or 3 secondary are produced by exogenous budding from the first secondary cell and, each secondary cell evolves into a sporont upon the tertiary cell differentiation (enodogenous budding) ; then, haplosporosomes are formed in the young sporont. Internal cleavages involve the differentiation of one tricellular spore per sporont. The outermost spore cell contains membrane-bounded osmiophilic bodies : the middle and the inner, most spore cells contain high density cytoplasmic ribosomes. The mechanism of spore formation from the stem cell of M. chungmuensis is the simplest of the class Paramyxea known up to now.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.38-55
• /
• 2019

At Otani University in Kyoto, Japan, there is a rubbed copy of Tripitaka Koreana, presumably printed in 1381. According to the postscript of the copy, written by Saek Lee himself, the rubbed copy was made at Haeinsa temple in 1381 and was kept at Sinluksa temple in Yeuju. The copy was delivered as a gift to Japan in 1414 and now is kept at the Library of Otani University. Although an approximate summary of the content of the copy was reported in the early 2000s after a basic survey, details of the copy, including the concrete format and packaging paper, are not known yet. In this paper a detailed survey of the copy is conducted on the 109 pages. The copy is divided into two parts: the wrapping and the inner pages. The wrapping paper is divided into yellow and brown colors depending on the material of the paper. The yellow colorwrapping paper was possibly made in 1381 at the time of the rubbed printing, and the brown wrapping paper was repaired after being moved to Japan. Using funds collected in February 1380, the copy of Gyeong(經), Yul(律), and Ron(論) chapters was printed in April 1381. Binding of the copy was completed in September, and the wrapping paper with the title in gold was made in October 1380. The box for keeping Buddhist scriptures was manufactured in November 1380. The copy was moved to Sinluksa temple in April 1382 and delivered to Japan in 1414. At Otani University, the copy is stored in separate rectangular boxes 32.1×25.3cm in size with a height of 23.6cm. The rectangular plate on the four sides is red in external color but black colorinside. The box for keeping Buddhist scriptures was probably made in 1381, but a partial repair was made later. Because of the difficulty of executing a detailed survey of the box for Buddhist scriptures, it is hard to find out its nation and period of production. We look forward to studying the copy as well as the box for Buddhist scriptures in future.