• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.12.1-12.1
• /
• 2009

For the micro conductive line, memory device fabrication process use many expensive processes such as manufactur-ing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because nano-metal particles contained inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as FPCB, PCB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line on flexible PCB substrate for the next generation electronic circuit using Ag nano-particles contained ink. To improve the line tolerance on flexible PCB, metal lines are fabricated by sequential prinitng method. Sequential printing method has vari-ous merits about fine, thick and high resolution pattern lines without bulge.

• 패션비즈니스
• /
• 제21권3호
• /
• pp.14-28
• /
• 2017

This purpose of this study to analyze effect material properties have on change in QR code recognition rate according to change of materials by comparing recognition rate of color QR code. QR code applied to textile materials has the advantage of being washable and being applicable to lost child prevention goods or clothes or a person with dementia through record of information relating to the material or input of additional information, differently from QR code printed on the conventional paper. An effective method of entering QR code in textile materials is Digital Textile Printing(DTP), that facilitates printing by rapidly applying diverse information, and small quantity production. It is possible to tailor various QR codes according to use. Regarding samples to use, cotton material used in clothing products and Tyvek material recently applied to clothing and related products were selected. Reactive dyes were used for cotton, pigment was used for Tyvek, and QR code was printed with an inkjet printer by direct printing method. Printing methods and surface textures are different between cotton and Tyvek. It was revealed that consequent print results and results of recognition rate were different. Regarding color to be printed, 2015 S/S - 2017 S/S color presented by Pantone was used. Color combination affected recognition rate of color QR code. Understanding color combination, material properties and print characteristics may be helpful in increasing recognition rate of color QR code, and may contribute to usability of color QR code applied to textile materials in the future.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.69-78
• /
• 2006

Proofing is one of the inspection operations of printing and can be considered a process control step. The three main kinds of proofs are press proofs, photomechanical proofs, and digital proofs. Photomechanical and digital proofs are also generally refered to as "off-press" proofs. Off-press color proofs are more economical than press proofs. Digital proofs offer fast production time along with a much lower cost per page. Hard-copy digital proofs can be output using thermal transfer printers, ink jet printers, and color laser copiers, as well as dye sublimation and electrophotographic technology. Ink jet method is commonly using because of the reasonal price. But ink jet system is difficult to reproduce an exact color proof. This research was carried out for the purpose of optimization of ink jet color proofing, using two kinds of ink jet printers with 6 colors (C, M, Y, K, mC, mM) and 4 colors (C, M, Y, K) system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.80-80
• /
• 2009

$BaTiO_3$ has high permittivity so that has been applied to dielectric and insulator materials in 3D system-level package integration. In order to achieve excellent performance of device, the $BaTiO_3$ layer should be highly dense. In this study, $BaTiO_3$ thick films were prepared by the inkjet printing method using 4 vol.% $BaTiO_3$ colloidal inks and cured at $28^{\circ}C$ for 5 h after infiltration of polymer resin for non-sintered process using 3 vol.% cyanate ester emulsion ink. From the obtained results. packing density was determined to be improved by overlapping rabbit ears which were generated by coffee ring effect. We also calculated the packing densities of the films and correlated these packing densities to the measured permittivity of the films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.502-502
• /
• 2007

Current thin film process using memory device fabrication process use expensive processes such as manufacturing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as PCB, FCPB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line for the electronic circuit board using metal ink contains Ag nano-particles. Metal lines are fabricated by two types of printing methods. One is a conventional printing method which is able to quick fabrication of fine pattern line, but has various difficulties about thick and high resolution DPI(Dot per Inch) pattern lines because of bulge and piling up phenomenon. Another(Second) methods is sequential printing method which has a various merits of fabrication for fine, thick and high resolution pattern lines without bulge. In this work, conductivities of metal pattern line are investigated with respect to printing methods and pattern thickness. As a result, conductivity of thick pattern is about several un.

• 한국콘텐츠학회논문지
• /
• 제15권1호
• /
• pp.74-85
• /
• 2015

RGB기반의 사진이미지를 오프셋 인쇄로 출력할 때 색역의 차이에 의한 색 손실이 발생하는 것은 상식이다. 따라서 사진가는 사진을 인쇄의뢰 할 때 일정정도의 색 손실을 감안하고 인쇄를 시행해야 한다. 이때 원본과 최대한 가까운 결과를 얻기 위해 시행하는 작업이 교정이다. 이러한 교정은 디지털기술이 도입되면서 관리가 용이해졌다. 즉 교정에 디지털장비를 사용하게 되어 교정의 질을 일정하게 유지 관리할 수 있게 되었다. 본 연구는 이러한 교정에 관한 연구이다. 기존에도 교정에 관한 연구가 있었지만 이는 인쇄분야에서 시행한 연구로 인쇄소 시스템을 기반으로 하고 있다. 즉 사진가가 거의 사용하지 않는 인쇄용 립(RIP)과 고가의 인쇄전용 장비를 필요로 하는 연구이다. 따라서 사진가 스스로 자신의 기준에 맞춘 교정을 시행하기 어려운 실정이다. 본 연구에서는 사진가가 직접 사진용 시스템을 이용하여 교정 작업을 시행할 수 있는 방안을 모색하기 위해 시행하였다. 즉 사진가가 주로 사용하는 포토샵 프로그램과 사진용 잉크젯 프린터 그리고 사진용지를 이용한 교정에 관한 연구이다.

• 한국진공학회지
• /
• 제20권1호
• /
• pp.63-69
• /
• 2011

본 연구에서는 기존 실리콘 반도체 기술 기반의 포토 및 이빔 리소그래피 공정을 통하여 유기 반도체 소자를 패터닝하였다. P3HT나 PEDOT 등의 유기 반도체는 용매에 녹기 때문에 MIMIC (micro-molding in capillaries)이나 inkjet printing 기술을 이용하여 마이크로미터 크기의 소자 제작이 가능하였으나, 펜타신은 용매에 녹지 않기 때문에 매우 복잡한 방법으로 마이크로미터 크기의 소자를 제작하여왔다. 그러나, 본 연구에서는 원자층 증착 방법으로 증착한 산화 알루미늄막을 펜타신의 보호층으로 이용하여 기존의 포토 및 이빔 리소그래피 방법으로 마이크로미터크기의 펜타신 소자를 제작하였으며 그 전기 특성을 확인하였다.

• 한국세라믹학회지
• /
• 제50권3호
• /
• pp.195-200
• /
• 2013

Here, we report preparation of cyan ceramic nano-pigment for inkjet printing and the Ni substitutional effects on the cyan color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of nickel-based cyan ceramic nano-pigments. Various compositions of $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using the polymerized complex method. The powder was then preheated at $400^{\circ}C$ for 5 h and finally calcined at $1000^{\circ}C$ for 5 h. XRD patterns of $Ni_xMg_{1-x}Al_2O_4$ showed a single phase of the spinel structure in all the compositions. The particle sizes ranged from 20 to 50 nm in TEM observations. The characteristics of the color tones of $Ni_xMg_{1-x}Al_2O_4$ were analyzed by UV-Visible spectroscopy and CIE $L^*a^*b^*$ measurement. CIE $L^*a^*b^*$ measurement results indicate that the pigment color changes from light cyan to deep cyan due to the decrease of the $a^*$ and $b^*$ values with an increase of an Ni substitutional amount. In addition, the thermal stability and the binding nature of $Ni_xMg_{1-x}Al_2O_4$ are also discussed using TG-DSC and FT-IR results respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.58.1-58.1
• /
• 2012

Direct write technologies provide flexible and economic means to manufacture low-cost large-area electronics. In this regard inkjet printing has frequently been used for the fabrication of electronic devices. Full advantage of this method, which is capable of reliable direct patterning with line and space dimensions in the 10 to 100 um regime, is only made with all-solution based processing. Among these printable electronic materials, silver and copper nanoparticles have been used as interconnecting materials. Specially, solutions of organic-encapsulated silver and copper nanoparticles may be printed and subsequently annealed to form low-resistance conductor patterns. In this talk, we describe novel processes for forming silver nanoplates and copper ion complex which have unique properties, and discuss the optimization of the printing/annealing processes to demonstrate plastic-compatible low-resistance conductors. By optimizing both the interconnecting materials and the surface treatments of substrate, it is possible to produce particles that anneal at low-temperatures (< $200^{\circ}C$) to form continuous films having low resistivity and appropriate work function for formation of rectifying contacts.

• 한국전산유체공학회지
• /
• 제13권3호
• /
• pp.8-13
• /
• 2008

We present a numerical simulation technique and some preliminary results of the impact and spreading of a droplet containing particles on the solid substrate in 2D. We used the 2nd-order Adams-Bashforth / Crank-Nicholson method to solve the Navier-Stokes equation and employed the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension. The impact velocity has been generated by the instantaneous gravity. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles and the discontinuous Galerkin method has been used for the stabilization of the interface advection equation. We investigated the droplet spreading by the inertial force and discussed effects of the presence of particles on the spreading behavior using an example problem. We observed reduced oscillation and spread for the particulate droplet.