• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1061-1064
• /
• 2009

Through dark injection space-charge-limited current (DI-SCLC) and trap-free SCLC measurements, it has been demonstrated that an indium tin oxide (ITO)/buckminsterfullerene ($C_{60}$) electrode can form a quasi-Ohmic contact with N, N'-bis (naphthalen-1-yl)-N, N'-bis(phenyl) benzidine (NPB). The DI-SCLC results show a clear peak current along with a shift of the peak position as the field intensity varies, implying an Ohmic (or quasi-Ohmic) contact. A theoretical simulation of the SCLC also shows that ITO/$C_{60}$ forms an Ohmic contact with NPB. The Ohmic contact makes it possible to estimate the NPB hole mobility through the use of both DI-SCLC and trap-free SCLC analysis. This also contributes to a reduction in power consumption.

• Journal of Information Display
• /
• 제10권4호
• /
• pp.143-148
• /
• 2009

The theoretical current density equations for organic semiconductors was derived according to the internal carrier emission equation based on the diffusion model at the Schottky barrier contact and the mobility equation based on the field dependence model, the so-called "Poole-Frenkel mobility model." The electric field becomes constant because of the absence of a space charge effect in the case of a higher injection barrier height and a lower sample thickness, but there is distribution in the electric field because of the space charge effect in the case of a lower injection barrier height and a higher sample thickness. The transition between the injection- and bulk-limited currents was presented according to the Schottky barrier height and the sample thickness change.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.95-103
• /
• 2019

Vapor explosions can be classified in terms of modes of contact between the hot molten fuel and the coolant, since different contact modes may affect fuel-coolant mixing and subsequent vapor explosion energetics. It is generally accepted that most vapor explosion phenomena fall into three different modes of contact; fuel pouring into coolant, coolant injection into fuel and stratified fuel-coolant layers. In this study, we review previous stratified steam explosion experiments as well as recent experiments performed at the KTH in Sweden. While experiments with prototypic reactor materials are minimal, we do note that generally the energetics is limited for the stratified mode of contact. When the fuel mass involved in a steam explosion in a stratified geometry is compared to a pool geometry based on geometrical aspects, one can conclude that there is a very limited set of conditions (when melt jet diameter is small) under which a steam explosion is more energetic in a stratified geometry. However, under these limited conditions the absolute energetic explosion output would still be small because the total fuel mass involved would be limited.

• 대한후두음성언어의학회지
• /
• 제28권1호
• /
• pp.32-37
• /
• 2017

Background and Objectives : This study evaluated the efficacy of combination therapy of proton pump inhibitor (PPI) and steroid inhaler (SI), with or without botulinum toxin injection (BTX) for contact granuloma. Subjects and Methods : Fourteen contact granuloma patients were enrolled in this study. Combination therapy of PPI and SI were used for the first line treatment. When combination therapy was not effective, BTX was performed as the second method. Treatment results were recorded as responsible or non-responsible. Farwell grade, size, history of voice abuse, gender, and reflux finding score (RFS) were compared between responsible group and non-responsible group. Results : Initial response rate was 28.6% after treatment of PPI and SI. BTX was performed on three un-responsible patients. After BTX injection, three patients had complete remission of granuloma. Final response rate was 50.0%. Un-responsible group had significantly higher RFS than responsible group. Conclusion : The efficacy of PPI and SI was limited for contact granuloma in this study. Botulium toxin injection was recommended in early phase when PPI and SI did not effective for contact granuloma. Prospective studies evaluating the effects of PPI and SI are warranted.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.508-509
• /
• 2005

In case of ITO/MEH-PPV/Al structure, the quantity of charge carriers flowing through the organic material was few and the density of them is fixed. The electric field inside of the device almost didn't change with the position. On the other hands, in case of Au/MEH-PPV/Au structure, the hole density increased rapidly nearby the anode but decreased nearby the cathode. The space charge phenomenon followed sufficient hole injection resulted in the change of the electric field with the position inside of the device. We verified that the result of the current-voltage simulation corresponded with experimental result.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.237-241
• /
• 2005

We present a device model for organic light emitting diodes(OLEDs) which includes charge injection, transport, recombination, and space charge effects in the organic materials. The model can describe both injection limited and space charge limited current flow and the transition between them. Calculated device current, light output, and quantum and power efficiency are presented for different cases of material and device parameters and demonstrate the improvements in device performance in bilayer devices. These results are interpreted using the calculated spatial variation of the electric field, charge density and recombination rate density in the device. We find that efficient OLEDs are possible for a proper choice of organic materials and contact parameters.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.71-77
• /
• 2020

Various manufacturing technologies, including over-molding and insert-injection molding, are used to produce hybrid plastics and metals. However, there are disadvantages to these technologies, as they require several steps in manufacturing and are limited to what can be reasonably achieved within the complexities of part geometry. This study aims to determine a practical approach for producing metal/plastic hybrid components by combining plastic injection molding and metal die casting to create a new hybrid metal/plastic molding process. The integrated metal/plastic hybrid injection molding process developed in this study uses the proven method of multi-component technology as a basis to combine plastic injection molding with metal die casting into one integrated process. In this study, the electrical conductivity and ampacity were verified to qualify the new process for the production of parts used in electronic devices. The electrical conductivity was measured, contacting both sides of the test sample with constant pressure, and the resistivity was measured using a micro ohmmeter. Also, the specific conductivity was subsequently calculated from the resistivity and contact surface of the conductor path. The ampacity defines the maximum amount of current a conductive path can carry before sustaining immediate or progressive deterioration. The manufactured hybrid multi-components were loaded with increasing currents, while the temperature was recorded with an infrared camera. To compare the measured infrared images, an electro-thermal simulation was conducted using commercial CAE software to predict the maximum temperature of the power loaded parts. Overall, during the injection molding process, it was demonstrated that multifunctional parts can be produced for electric and electronic applications.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.73-82
• /
• 2015

Despite significant effects on macroscopic migration and distribution of CO₂ injected during geological sequestration, only limited information is available on wettability in microscopic scCO₂-brine-mineral systems due to difficulties in pore-scale observation. In this study, a micromodel had been developed to improve our understanding of how scCO₂ flooding and residual characteristics of porewater are affected by the wettability in scCO₂-water-glass bead systems. The micromodel (a transparent pore structure made of glass beads and glass plates) in a pressurized chamber provided the opportunity to visualize scCO₂ spreading and porewater displacement. CO₂ flooding followed by fingering migration and dewatering followed by formation of residual water were observed through an imaging system. Measurement of contact angles of residual porewater in micromodels were conducted to estimate wettability in a scCO₂-water-glass bead system. The measurement revealed that the brine-3M NaCl solution-is a wetting fluid and the surface of glass beads is water-wet. It is also found that the contact angle at equilibrium decreases as the pressure decreases, whereas it increases as the salinity increases. Such changes in wettability may significantly affect the patterns of scCO₂ migration and porewater residence during the process of CO₂ injection into a saline aquifer at high pressures.

• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.181-186
• /
• 2022

댐체 구조물 사면부(RIM부)는 본체와 원지반이 접속하는 매우 중요한 접촉부(interface) 이다. 일반적으로 댐 구조물 사면부 지반보강을 위한 그라우팅 설계시 제한된 자료(시추공, 지질도 등)를 이용하여 계획하기 때문에 사면부 RIM 그라우팅 대상 원지반 특성을 정확하게 고려하여 설계하기는 매우 어려운 실정이다. 또한, 실제 차수성이 확보된 원지반에 설계시 계획된 그라우팅 물량을 천공 주입할 경우에는 차수성이 확보된 원지반이 교란되어 차수효과를 오히려 저해할 가능성도 있다. 이를 극복하기 위해서는 구조물 사면부(RIM) 그라우팅 수행 전에 지질여건을 우선적으로 고려하고 현장수리시험을 통하여 원지반에 대한 최적의 그라우팅을 실시여부를 결정하는 것이 기초처리 대상 지반의 차수성 확보에 매우 적합하다고 판단된다. 본 논문에 적용된 RIM부 그라우팅 판단여부를 결정하기 위하여 대상 구간의 사면구간 암반에 대하여, 파일럿 홀(Pilot hole) 수압시험 수행 분석결과 1 Lugeon 이하의 차수성을 나타내며, 시멘트 주입량 역시 1 kg/m 이하의 주입결과를 나타낸다. 이때는 그라우팅을 실시하는 것이 오히려 역효과가 난다고 판단된다. 이 시험결과 수치는 사면 절취시 육안관찰과 지질도 작성결과를 이용하여 분석할 때 댐 설계 기준인 1 Lugeon 이하의 경우가 되어, 괴상(Massive)의 차수성이 어느 정도 확보된 암반으로 평가할 수 있다. 따라서 댐체 구조물 사면부에 RIM 그라우팅의 실시 결정기준은 암반상태에서 1 Lugeon 차수성이고, 시멘트 주입량 역시 1 kg/m을 기준으로 하여 RIM 그라우팅 실시여부를 결정하는 것이 바람직하다고 판단된다.