• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.4
• /
• pp.454-461
• /
• 2015

Light enhancement of GaN based light emitting diodes (LEDs) have been investigated by texturing the top p-GaN surface. Nano-textured LEDs have been fabricated using self-assembled Ni nano mask during dry etching process. Experimental results were further compared with simulation data. Three types of LEDs were fabricated: Conventional (planar LED), Surface nano-porous (porous LED) and Surface nano-cluster (cluster LED). Compared to planar LED there were about 100% and 54% enhancement of light output power for porous and cluster LED respectively at an injection current of 20 mA. Moreover, simulation result showed consistency with experimental result. The increased probability of light scattering at the nano-textured GaN-air interface is the major reason for increasing the light extraction efficiency.

• The Korean Journal of Rheology
• /
• v.8 no.3_4
• /
• pp.207-214
• /
• 1996

사출성형은 많은 장점과 유용성에도 불구하고 싱크마크나 휨과 같은 변형문제를 피 하기 어렵다. 이것은 성형품의 부위별 온도분포 및 냉각속도 차이에 의한 잔류응력에 기인 하는 것으로 구조가 복잡하거나 크기가 쿤 경우에 더욱 더 문제가 되기 쉽다. 이와 같은 문 제를 해결하기 위하여 성형품의 내부에 기포를 형성시켜 수지의 수축분을 기포의 성장으로 보상하여 주는 가스사출성형이 개발되어 많이 활용되고 있는 실정이다. 한편 일반 가스성형 과 달리 수지를 완전히 채운후 저압의 공기를 이용하여 기포를 발생시켜 수지의 체적수축분 을 보상해주는 PFP성형기술은 가스사출의 나점인 공기의 유동조절문제를 해결하고 비용이 저렴한 등의 잇점을 가지고 있다. 이 과정은 가스성형공정의 2차 침투과정과 매우 유사하나 아직까지 이에대한 이해나 연구는 매우 부족한 실정이다 본 연구는 기포의 성장이 수지의 체적수축에 의한 것이라는 가정에 근거하여 기포성장길이에 관한 모델링을 수행한 것이다. 실험결과와의 비교를 통하여 기본 가정에 대한 타당성을 검증하고 여러 인자들의 영향을 살 펴보았다. 본 연구는 PFP성형공정에 대한 이해를 증진시켜 금형설계 및 성형조건 설정에 대한 가이드라인을 제시하며 아울러 PFP공정에 대한 보다 체계적인 이해 및 일반가스성형 의 2차 침투과정 등의 관련 현상에 대한 이해 및 연구에 도움이 될것으로 기대된다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.338-350
• /
• 2010

As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.129-139
• /
• 2012

This paper will describe the structure and characteristics of operator training system which was developed to maintain the quality of operational ability for COMS (Communication, Ocean and Meteorological Satellite) operators during a long-term nominal operations of missions and a contingency operations against an occurrence of anomaly. In particular it will present benefits and expected effects of the training system with a focus on three parts which are functions especially for trainer-friendly failure injection, an automatic sequencer of training scenario based on the predefined plan and additional functions of the existing COMS simulator. Furthermore, it will present a practical example of training on the training system to understand the overall mechanism of training process.

• The Journal of the Korean dental association
• /
• v.22 no.9 s.184
• /
• pp.771-780
• /
• 1984

To observe the healing process of the gingival wound in diabetic condition, the author induced diabetes mellitus by intravascular injection of streptozotocin in rat tail vein and made fresh wound in rat mandibular posterior gingiva using scalpel. The healing processes of gingival wound were examined periodically by light microscopy. The results were as follows. 1) The healing was completed at second week in control group, but it delayed until fourth week in experimental group and the organization was persisted for first two weeks. 2) The inflamed gingiva of dibetic rat demonstrated scanty polymorphonuclear lerkocytic infiltration at the early stage of experiment, but it soon became numerous as in cotrol group and the lymphocytic infiltrations were same degree as in control group. 3) The tissue destruction was broader in the experimental group than in the control group. The epithelization was began at the early stage of healing and the epithelial attachment was reformed with the completion of the wound healing. 4) Loss of Sharpey's fibers and destruction of cementum and alveolar bone were observed with the inflammatroy reaction, but these were reformed with the completion of the wound healing.

• Journal of The Korean Astronomical Society
• /
• v.53 no.3
• /
• pp.59-67
• /
• 2020

We propose semi-analytic models for the electron momentum distribution in weak shocks that accounts for both in situ acceleration and re-acceleration through diffusive shock acceleration (DSA). In the former case, a small fraction of incoming electrons is assumed to be reflected at the shock ramp and pre-accelerated to the so-called injection momentum, p_inj, above which particles can diffuse across the shock transition and participate in the DSA process. This leads to the DSA power-law distribution extending from the smallest momentum of reflected electrons, p_ref, all the way to the cutoff momentum, p_eq, constrained by radiative cooling. In the latter case, fossil electrons, specified by a power-law spectrum with a cutoff, are assumed to be re-accelerated from p_ref up to p_eq via DSA. We show that, in the in situ acceleration model, the amplitude of radio synchrotron emission depends strongly on the shock Mach number, whereas it varies rather weakly in the re-acceleration model. Considering the rather turbulent nature of shocks in the intracluster medium, such extreme dependence for the in situ acceleration might not be compatible with the relatively smooth surface brightness of observed radio relics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.147-150
• /
• 2007

In this study, cooling characteristics of combustion gas were investigated by injecting liquid nitrogen into liquid rocket combustion chamber. A injection ring of liquid nitrogen was installed between a combustion chamber and a mixing chamber which was designed for mixing of combustion gas and nitrogen. At first, a ignition test of liquid rocket engine was conducted to verify a stable combustion process and 10 second combustion tests were successfully conducted. The results showed that combustion gas of LRE could be cooled by using liquid nitrogen.

• International Journal of CAD/CAM
• /
• v.3 no.1_2
• /
• pp.19-29
• /
• 2003

Disassembly is a fundamental process needed for component reuse and material recycling in all assembled products. Integral attachments, also known as 'snap' fits, are favored fastening means in design for assembly (DFA) methodologies, but not necessarily a favored choice for design for disassembly. In this paper, design methods of a new class of integral attachments are proposed, where the snapped joints can be disengaged by the application of localized heat sources. The design problem of reversible integral attachments is posed as the design of compliant mechanisms actuated with localized thermal expansion of materials. Topology optimization technique is utilized to obtain conceptual layout of snap-fit mechanisms that realizes a desired deformation of snapped features for joint release. Two design approaches are attempted and design results of each approach are presented, where the geometrical configuration extracted from optimal topologies are simplified to enhance the manufacturability for the conventional injection molding technologies. To maximize the magnitude of deformation, a design scheme has been proposed to include boundary conditions as design variables. Final designs are verified using commercial software for finite element analysis.

• Journal of ILASS-Korea
• /
• v.15 no.3
• /
• pp.140-149
• /
• 2010

The spray-wall impingement in diesel engines is important to mixture preparation, engine performance and pollutant emissions. The purpose of this paper is to study the effects of spray-wall impingement on fuel distribution, combustion and emission characteristics by using both experimental and numerical methods. To investigate the spray-wall impingement process, an impingement-chamber was designed and a visualization experiment system was also developed. The images of impinged spray and free spray were digitally recorded with an intensified CCD camera. To investigate the fuel distribution, combustion and emission characteristics of impinged spray in a real diesel engine, the fuel injection and combustion processes of an engine with impingement-chamber were simulated by CFD software. Equivalence ratio distribution results were obtained to understand the fuel distribution characteristics of the impinged spray. Some combustion and emission characteristics were also acquired and the results showed that ignition delay of impinged spray was shorter than that of free spray; NO emission of the impinged spray was significantly less than that of free spray, but soot emission of impinged spray was more than that of the free spray. This study found that the diesel engine with spray-wall impingement has significant potential to reduce NO emission.

• YAKHAK HOEJI
• /
• v.34 no.5
• /
• pp.311-322
• /
• 1990

This study primarily attempted to investigate the effects of methamphetamine on stereotyped behavior. Furthermore, an extensive experiment was conducted to examine the cortex methamphetamine concentration and levels of dopamine, serotonin, and their metabolites in striatum, septum and hypothalamus. Following treatment with 10 mg/kg methamphetamine, stereotyped behavior was observed in 10 minutes. Consequently female rats displayed more intense and longer lasting activity than the male. The concentration of cortex methamphetamine was even higher in female than male. The administration of methamphetamine increased the rate of dopamine turnover-i.e. lower dopamine, higher homovanillic acid in the striatum, septum. The highest rate was found in the striatum. Methamphetamine decreased the levels of serotonin, and its metabolite of 5-indoleacetic acid in the striatum, septum. An intensity in behavioral response was accompanied by an increase in dopamine turnover, a decrease in serotonergic transmission. The reduction of 3,4-dihydroxyphenylacetic acid-i.e. the metabolite of dopamine was due not to the inhibition of monoamine oxidase but to the induction of monoamine oxidase but to the induction of catechol-O-methyltransferase. The phenomenon of biogenic amines by methamphetamine concurred upon the concentration of methamphetamine in the brain. This process preceded stereotyped behavior. After single injection of 10 mg/kg methamphetamine, the levels of biogenic amines recovered within 6 hours.