• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.62-66
• /
• 2010

Company which produce the latest plastic products of survival dimension for competitive power security productivity elevation activity hard do. But enterprises is lacking value elevation activity that customer among product special quality is thinking heftily and isn't grasping well adjusted impact factors. So, addition quality failure cost is produced. In this research, investigated impact factor and factors influencing most heftily in quality for productivity elevation. As a result, present example that serve to control well importance benevolence.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.109-124
• /
• 1993

본 연구의 목표는 임의의 3차원 사출성형 금형 공간내에서 단섬유 강화 플라스틱의 충전 공정에서의 과도기적 섬유방향성을 예측하는 수치해석 프로그램의 개발에 있다. Hele-Shaw 방정식에 단섬유에 의해서 추가된 응력을 고려한 Dinh-Armstrong의 모델을 도 입함으로써 새로운 충전과정의 압력 지배 방정식이 유도되었다. 새로운 압력지배 방정식은 단섬유에 의한 응력 때문에 몇 개의 새로운 항들을 포함하고 있다. 충전 과정의 해석은 새 로운 압력지배방정식과 에너지 방정식을 유한효소법과 유한 차분법을 이용하여 풀고 동시에 배향텐서(roientation tensor)의 변화 방정식을 4차 Runge-Kutta 방법을 이용하여 풀었다. 단섬유 배향 텐서를 텐서의 변환 법칙을 이용하여 임의의 3차원 금형 공간내의 모든유한요 소의 중심에서 두께방향의 모든유한 차분 격자를 따라 계산하였다. 이러한 방법으로 임의의 3차원 사출성형 금형 공간내에서 비등온 충전유동과 과도기적 3차원 섬유배향상태를 서로의 상호작용을 고려하여 수치 모사하여 다양한 유동 형태에 따른 단섬유 배향 상태의 변화에 대하여 알아보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.69-81
• /
• 1999

In this research computational methods for the droplet atomization and spray wall impingement are studied for the non-evaporating diesel fuel spray. The TAB(Taylor Analogy Breakup) model and Wave model are compared with experiments in order to describe droplet atomization process. The Watkins model and O'Rourke model are compared to simulate the spray wall impingement. As a result, It is found that the application of the Wave model has a good agreement with the experimental data in the case of high pressure injection. With regard to wall Impingement phenomena, it is found that the Watkins model is appropriate to the high temperature cylinder wall condition, while the O'Rourke model is appropriate to cold starting problem.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.852-855
• /
• 2010

Numerical simulations for large scale triaxial tests with large diameter rockfill materials are conducted using distinct element method. For generation of compacted assembly with specific grain size distribution and initial material porosity, the clump logic method and expansion of generated particles are adapted. With micro parameters which are chosen by calibration process, discrete particle modelling of triaxial test in case of other confining stress and cyclic loading condition were conducted. Also numerical simulations of fluid injection into particulate materials were conducted to observe cavity initiation and propagation using distinct element method. The fluid scheme solves the continuity and Navior-Stokes equations numerically, then derives pressure and velocity vectors for fixed grid by considering the existence of particles within the fluid cell.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.165-168
• /
• 1998

Re-oxidized nitrided oxides which have been investigated as alternative gate oxide for Metal- Oxide -Semiconductor field effect devices were grown by conventional furnace process using pure NH$_3$ and dry $O_2$ gas, and were characterized via a Fowler-Nordheim Tunneling electron injection technique. We studied Ig-Vg characteristics, leakage current, $\Delta$Vg under constant current stress from electrical characteristics point of view and TDDB from reliability point of view of MOS capacitors with SiO$_2$, NO, ONO dielectrics. Also, we studied the effect of stress temperature (25, 50, 75, 100, and 1$25^{\circ}C$). Overall, our results indicate that optimized re-oxidized nitrided oxide shows improved Ig-Vg characteristics, leakage current over the nitrided oxide and SiO$_2$. It has also been shown that re-oxidized nitrided oxide have better TDDB performance than SiO$_2$ while maintaining a similar temperature and electric field dependence. Especially, the Qbd is increased by about 1.5 times.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.970-972
• /
• 2006

The surface of ITO in OLEDs was treated with $HfO_x$ deposition process using an atomic layer chemical vapor deposition system. The treatment at room temperature for 5 cycles exhibited significantly improved electroluminescent characteristics compared to the OLEDs without any treatment, which is believed to be caused by the increased holes injection efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1503-1506
• /
• 2005

This dissertation represents method concerning high performance prism LGP design in 17 inch TFT-LCD. By means of developing LGP with total size of 8mm that has prism on both upper side and bottom side, it is superior to previous printing way in gaining high brightness. It can realize actual material simulation on prism LGP production using 17inch injection process and about 20% luminance enhancement is achieved based on such method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3246-3255
• /
• 1996

A threshold voltage extraction scheme which does not need matched replica of the MOSFET under test is proposed. In contrast to alternative methods, the accuracy of the proposed scheme does not depend on the matching of the test transistors. The proposed scheme has been implemented in a matching-free way using a switched-capacitor subtracting ampliier and a dynmic current mirror. Nonideal effects associated with these circuits, such as non-zero offset voltages and finite gains of op-amps, capcitor mismateches, and charge injection of MOS switches, are investigated and compensated. The circuit has been designed using ISRC 1.5.mu.m CMOS process parameters andfabricated at Inter-University semiconductor Research Center, and its performance has been evaluated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.26-31
• /
• 2002

To realize a high integrated Flash memory utilizing SONOS memory devices, the NOR type 1TC(one Transistor Cell) SONOS Flash arrays are fabricated and characterized. This SONOS Flash arrays with common source lines are designed and fabricated by conventional 0.35$\mu\textrm{m}$ CMOS process. The thickness of ONO for memory cell is tunnel oxide of 34${\AA}$, nitride of 73${\AA}$ and blocking oxide of 34${\AA}$. To investigate operating characteristics, CHEI(Channel Hot Electron Injection) method and Bit line erase method are selected as the write operation and the erase method, respectively. The disturbance characteristics according to the write/erase/read cycling are also examined. The degradation characteristics are investigated and then the reliability of SONOS flash memory is guaranteed.

• Journal of ILASS-Korea
• /
• v.11 no.4
• /
• pp.234-243
• /
• 2006

Diesel autothermal reforming (ATR) is a chemical process to produce hydrogen for fuel cell applications. Several previous studies were carried out to identify technical issues in diesel reforming. It is hard to vaporize diesel due to its high boiling points. Liquid droplets of diesel result in inhomogeneous fuel mixing with other reactants such as $O_2\;and\;H_2O$, which leads to reduce the reforming efficiency and make undesired coke in reactor. To solve the fuel delivery issue, we applied an ultrasonic device as a fuel injection system. Ultrasonic injector (UI) remarkably enhanced the reforming efficiency. This paper will present the reforming results using UI. And we will discuss about atomization effects of diesel on autothermal reforming reaction.