• Journal of ILASS-Korea
• /
• v.5 no.2
• /
• pp.28-34
• /
• 2000

To reduce the soot and NOx simultaneously, a new system of stratified injection is developed. This system discharges stratified diesel-methanol in a D. I. Diesel Engine. Nozzle and delivery valve of conventional injection system were remodeled to inject diesel and methanol from one injector sequently. The quantity of diesel and methanol was controled precisely by micrometers mounted on the injection control lack. The real injection ratio of dual fuel was measured by volumetric ratio. We could confirm the capabilities that soot and NOx simultaneously were reduced by diesel-methanol stratified injection from the results of in-cylinder pressure data obtained from combustion experiment by stratified injection, heat release rate and mass fraction bumed.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.194-199
• /
• 1997

We fabricated MIM (Metal-Insulator-Metal) antifuses with Al/a-Si/Mo structure and then examined the I-V characteristics and on-state resistance distribution of antifuses. The leakage current of antifuses is below $1Pa/{\mu}m^2$, and programming voltage lies within 10 to 11 V. After programming, on-resistance of antifuses is mostly 10-20$\Omega$ and 20% of these have above 100$\Omega$. In order to reduce on-resistance and the deviation of this distribution, we tried to inject current again into already programed antifuses (we call this re-programming method). From this method, the resistance of antifuses with above 100Ω can be reduced to below 50$\Omega$. When antifuses are programmed by re-programming method, these antifuses have more uniform and lower on-resistance than programmed with one-pulse.

• Korean Journal of Adult Nursing
• /
• v.12 no.3
• /
• pp.369-383
• /
• 2000

The purpose of this study was to understand clinical nurses' knowledge and attitudes on pain management. The subject of the study were 254 nurses working at two hospitals affiliated with a university in Seoul. The questionnaires included four areas: general knowledge on pain, knowledge on the use of analgesia, knowledge and implementation on the pain assessment scales and pain interventions and nurses' general characteristics. The data were analyzed with descriptive statistics, analysis of variance, LSD test and t-test using SPSS statistical package. The results were as follows. 1. The mean score of the general pain knowledge was 61.46 and that of knowledge on the use of analgesia was 52.19. 2. Most nurses(74%) answered with hesitation about injecting narcotic analgesia to patients. 3. The pain assessment scale which nurses knew (57.5%) and used(48.0%) extremely was a simple descriptive scale. 4. The pain intervention which nurses knew (94.5%) and implemented(92.1%) extremely was to inject analgesia. 5. The number of nurses who had learned about pain management was 49 of 254(19.3%). 6. Nurses' knowledge on the use of analgesia was of relevance to having learned pain management, but general pain knowledge was not so relevant. According to this research, I suggest the following. 1. It is necessary to develop an education program with actual practice and intervention which nurses can perform for themselves. 2. It is necessary to continuously educate about pain management in clinical wards.

• Journal of ILASS-Korea
• /
• v.7 no.1
• /
• pp.7-13
• /
• 2002

This paper is study on simultaneous reduction of NOx and soot for direct injection diesel engine using high and low cetane fuels. The stratified injection system was applied for diesel engine to use high and low cetane fuel. In this study, diesel fuel was used as high cetane fuels, methanol was used as low cetane fuels. Some parts of the injection system, ie. Nozzle holder. delivery vale, was remodeled to inject dual fuel sequentially from one injector. The leak injection quantity ratio of dual fuel was certificated by volumetric ratio at injection quantity experiment. According as concentration of low cetane fuel was varied, combustion experiment was performed using Toroidal and Complex chamber. Also, exhaust gas and fuel consumption were measured at the same time. Simultaneous reduction of NOx and soot was achieved at complex chamber regardless of concentration of low cetane fuel. However, according as concentration of low cetane fuel was increased, THC and CO was increased.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1609-1611
• /
• 2002

Multi-layer organic electroluminescent(EL) devices with Al-CsF composite as a cathode were fabricated. This device privides low driving voltage and high quantum efficiency. CsF is evaporated onto and diffuse into electron transport layer. $Alq_3$. The Fermi level of $Alq_3$ moves towards the LUMO level.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.86-91
• /
• 2016

This paper is concerned chiefly with the method of porous foam manufacture using basalt stone powder sludge. The hydrogen peroxide($H_2O_2$) of bloating agent has lots of problems to manufacture porous lightweight aggregate due to fast reaction rate with cement or calcium hydroxide($Ca(OH)_2$). The $H_2O_2$ injecting method using nozzle for manufacturing porous lightweight aggregate is proposed, in this study. This method is to inject $H_2O_2$ at the pressure of 10 MPa on upper side of slurry mixing materials such as stone powder sludge and quick-lime(CaO) by injector. The specimen was dried in furnace at $100^{\circ}C$ for 1 hour and cured at ambient temperature for 30 days. We analyzed the characteristics including specific gravity and water absorption. The experiments were found that the porous foam has low specific gravity, high water absorption and uniform distribution of porous more than manufactured foam by general bloating methods.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.226-234
• /
• 2006

Photovoltaic (PV) generators have nonlinear V-I characteristics and maximum power points which vary with illumination level and temperature. Using a maximum power point tracker (MPPT) with an intermediate converter can increase the system efficiency by matching the PV systems to the load. This paper presents a maximum power point tracker based on fuzzy logic and a control scheme for a single-phase inverter connected to the utility grid. The fuzzy logic controller (FLC) provides an adaptive nature for system performance. Also the FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve the control system. A single-phase AC-DC inverter is used to connect the PV system to the grid utility and local loads. While a control scheme is implemented to inject the PV output power to the utility grid at unity power factor and reduced harmonic level. The simulation results have shown the effectiveness of the proposed scheme.

• Journal of Broadcast Engineering
• /
• v.26 no.7
• /
• pp.868-876
• /
• 2021

Deploying deep neural network model training performs remarkable performance in the fields of Object detection and Instance segmentation. To train these models, features are first extracted from the input image using a backbone network. The extracted features can be reused by various tasks. Research has been actively conducted to serve various tasks by using these learned features. In this process, standardization discussions about encoding, decoding, and transmission methods are proceeding actively. In this scenario, it is necessary to analyze the response characteristics of features against various distortions that may occur in the data transmission or data compression process. In this paper, experiment was conducted to inject various distortions into the feature in the object recognition task. And analyze the mAP (mean Average Precision) metric between the predicted value output from the neural network and the target value as the intensity of various distortions was increased. Experiments have shown that features are more robust to distortion than images. And this points out that using the feature as transmission means can prevent the loss of information against the various distortions during data transmission and compression process.

• Journal of ILASS-Korea
• /
• v.13 no.4
• /
• pp.212-219
• /
• 2008

To develop the twin-fluid atomizer having the excellent performance of painting, the spray characteristics of how a wide area can be painted efficiently by one time spraying were studied in this paper. Spray phenomena are affected by the many factors determining the spray field such as the spraying pressure of gas, the spraying pressure and viscosity of liquid paints, the opening duration of needle valve, the design dimension of nozzle, and so on. As the results of experiments, these factors affecting on spray characteristics were suggested as followings; 1) The optimum spraying pressure of gas was $0.015{\sim}0.02\;kPa$, and the appropriate spraying pressure of liquid paint was 0.01kPa, In these situations, the setting up pressures must be compensated as much as the losing amount of pressure because a decompression occurred when operating valves. 2) The duration of opening the needle valve must be sustained for $1{\sim}2$ seconds to inject gas after spraying the liquid paint. This operating of the needle valve was necessary to avoid the affect on the changing of liquid column length, and to prevent the droplet deposit at the initial time of spraying. 3) The spray tip penetration was gained form the experimental equation, and the effective spraying angle was $85^{\circ}{\pm}5^{\circ}$ just at he appropriate spraying pressure of gas. The distribution of the area sprayed had the variation in $350{\pm}50\;mm$ because of the spraying pressure of gas, the its distance from the spray tip, and the lift of the needle valve.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.3
• /
• pp.39-47
• /
• 2018

Purpose: The purpose of this study is to examine the deployment types and characteristics of mobile hospitals with it's historical backgrounds. Methods: Since the disaster can not be classified by country, the scope of the study is to include both domestic and foreign mobile hospitals. In order to minimize the casualties from the field hospitals used at the time of the First World War, which is the mother of mobile hospitals, we analyzed the mobile hospitals which are more compact and changed to the target areas and analyzed the mobile hospitals. Results: Historically, mobile hospitals have been transformed in a way that they are close to the target area and rapidly inject essential elements, and the deployment of wards has evolved to be able to combine in any form with center corridor. In the case of hospitals that can deal with infectious diseases, each treatment room was installed separately to thoroughly separate the copper wire. Implications: As disaster damage increases and incidence increases, field response should be quick. However, research on mobile hospitals, which are indispensable for field response in Korea, has not been conducted in various ways. From the origins of mobile hospitals, the development process is reviewed, and research is carried out to clarify the grounds and backgrounds for the planning of mobile hospitals that are quick and appropriate to the situation in Korea and abroad.