• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2019년도 추계학술대회
• /
• pp.21-21
• /
• 2019

Approximately 80% of rice field in Africa conducts in rainfed (Nishimaki 2017). The rice is damaged by water stress because fields like rainfed lowland repeat drying and humidity of soil because of impossible water control. Then water stress is one of the major limiting factors for decreasing rice yield. So, in initial growth stage, quick and efficient root development is useful way to avoid drought stress by getting water from deeper soil layer with roots elongation as the hypothesis. Daniel et al (2016) reported that NERICA1 and NERICA4 show different patterns of root plasticity for drought stress. NERICA1 has greater development of lateral root in shallow soil layer, while NERICA4 has greater development in deep root elongation to underground. This study was aimed to evaluate the effect of root development in initial growth stage on growing NERICA1 and NERICA4 under different soil moisture condition in rainfed lowland rice field. They were grown in same water condition until 35 days after sowing (35DAS), and after that each varieties were separated in dry and wet condition. The rice plants were grown until 60DAS. The results of soil moisture, the root extension angle, shoot dry weight and bleeding ratio showed that NERICA4 can mitigate dry stress from surface soil compered to NERICA1.

• 대한음성학회지:말소리
• /
• 제31_32호
• /
• pp.195-205
• /
• 1996

The aim of this paper is to describe the prosodic structure of Korean related to the syllable duration varying with its positional difference. An attempt is made in this study to analyze and describe the concrete correlation between the syllable lengthening and its position in the utterance at the initial and final positions. Using the syllable [na] at the final and initial position of a prosodic phrase in the Korean version of 'the North Wind and the Sun', it has found that the ratio of phrase final versus phrase initial syllable lengthening was approximately 1.8:1 for 4 subjects taking part in the test. In the case of nonsense data, we found that the ratio was approximately 1.6:1 for 2 out of 3 subjects. The results of this study might indicate that Korean tends to have a high rate of final lengthening. We can tentatively classify it, therefore, as a stress-timed language. Still, there is no denying that further studies should be done before we can be absolutely certain about the classification of languages along the dichotomy scale.

• Structural Engineering and Mechanics
• /
• 제53권2호
• /
• pp.311-324
• /
• 2015

The purpose of this study was to investigate experimentally the fatigue performance of reinforced concrete (RC) beams with hot-rolled ribbed fine-grained steel bars of yielding strength 500MPa (HRBF500). Three rectangular and three T-section RC beams with HRBF500 bars were constructed and tested under static and constant-amplitude cyclic loading. Prior to the application of repeated loading, all beams were initially cracked under static loading. The major test variables were the steel ratio, cross-sectional shape and stress range. The stress evolution of HRBF500 bars, the information about crack growth and the deflection developments of test beams were presented and analyzed. Rapid increases in deflections and tension steel stress occured in the early stages of fatigue loading, and were followed by a relatively stable period. Test results indicate that, the concrete beams reinforced with appropriate amount of HRBF500 bars can survive 2.5 million cycles of constant-amplitude cyclic loading with no apparent signs of damage, on condition that the initial extreme tensile stress in HRBF500 steel bars was controlled less than 150 MPa. It was also found that, the initial extreme tension steel stress, stress range, and steel ratio were the main factors that affected the fatigue properties of RC beams with HRBF500 bars, whose effects on fatigue properties were fully discussed in this paper, while the cross-sectional shape had no significant influence in fatigue properties. The results provide important guidance for the fatigue design of concrete beams reinforced with HRBF500 steel bars.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.53-64
• /
• 2005

지반설계에 있어 지반거동은 일반적으로 단순화된 선형탄성이나 완전소성으로 간주되어 적용되고 있으나, 비선형 응력-변형률 거동, 응력이력 및 함수비 등의 현장 지반조건 또한 정밀한 지반설계를 위해서는 적절히 반영되어야 한다. 본 연구에서는 삼축압축시험과 공진주시험을 포함한 일련의 실내시험을 통하여 실트함유량, 상대밀도, 응력상태등 다양한 지반조건과 과압밀비 및 함수비의 변화와 같은 현장 지반조건을 고려하여 사질토의 강도 및 강성도 특성을 분석하였다. 그 결과 최대전단강도 및 초기전단탄성계수에 대한 과압밀의 영향은 미소하게 나타났으나, 초기 미소변형률 이후부터 파괴까지의 비선형 탄성구간에서는 과압밀의 영향이 무시할 수 없는 영향인자임을 확인할 수 있었다. 함수비의 경우 구속압과 상대밀도가 낮은 경우 함수비가 증가함에 따라 초기전단탄성계수는 세립분 증가와 함께 감소하였으며, 구속압이 증가할수록 함수비의 영향은 감소하였다.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.75-83
• /
• 2002

본 연구에서는 준설토, EPS 그리고 고화재를 혼합한 경량혼합토의 역학적 특성을 일축 및 삼축압축시험을 통하여 고찰하였다. 역학적 특성은 다양한 준설토의 초기 함수비, EPS 함유율, 시멘트 함유율 그리고 양생압력에 대한 경량혼합토의 압축강도에 대하여 연구하였다. 삼축압축상태에서 EPS를 함유한 경량혼합토의 압축강도는 유효구속압에 의존 하지 않는 것으로 나타났다. EPS 함유율이 감소할수록($A_E$<2%) 그리고 시멘트 함유율이 증가할수록($A_c$>2%) 삼축압축강도-변형 거동특성은 극한 압축강도를 지나 급격한 압축강도의 감소를 보이는 시멘트 혼합토의 압축강도-변형 거동특성과 유사한 것으로 나타났다. 200kpa 이상의 압축강도를 요구하는 개량지반에 본 경량혼합토를 적용하는 경우에서 적절한 준설토의 초기함수비, EPS 함유율은 각각 약 165%~175%이상 그리고 3%~4%이상으로 제시할 수가 있었다. 삼축 및 일축압축상태에서 극한 압축강도는 시멘트 함유율이 2%이상에서 거의 증가하지 않음으로서 한계 시멘트 함유율은 2%로 제시할 수가 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.933-937
• /
• 2011

돔 분리형 복합재 연소관의 접합 체결부 최적의 설계 길이를 결정하기 위해 접합부 길이변화에 따른 구조해석을 수행하였다. 이때, 접착 체결부의 길이는 50mm에서 300mm의 범위를 갖는다. 무응력상태의 초기 접합부 길이대비 응력구배가 발생하는 구간의 길이를 "응력구배 길이 비"로 정의하고 이를 목적함수로 선정하였다. 구조해석 결과 접착 체결부의 길이가 200mm 이상으로 증가할 경우 응력구배 길이 비의 증가가 서서히 나타남을 확인하였다. 이는, 접착 체결부에 적용되는 2,500psi 내압에서 구조적 안전성을 확보하는 최적화된 접착 체결부의 길이가 200mm임을 의미한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.916-923
• /
• 2005

In this study, to observe aging effect of undrained shear behavior for Nak-Dong River sand, undrained static and cyclic triaxial tests were performed with changing relative density ($D_r$), consolidation stress ratio($K_c$) and consolidation time. As a result of the test, the modulus of elasticity to all samples estimated within elastic zone by the micro strain of about 0.05% in case of static shear behavior increased with the lapse of consolidation time significantly, so aging effect was shown largely. Also strength of phase transformation point(S_{PT}$) and strength of critical stress ratio point($S_{CSR}$) increased with the lapse of consolidation time. Undrained cyclic shear strength($R_f$) obtained from the failure strain 5% increased in proportion to relative density($D_r$) and initial static shear stress($q_{st}$), $R_f$ of consolidated sample for 1,000 minutes increased about 10.6% compared to that for 10 minutes at the loose sand, and $R_f$ increased about 7.0% at the medium sand. In situ application range of $R_f$ to the magnitude of earthquake for Nak-Dong River sand was proposed by using a increasing rate of $R_f$ as being aging effect shown from this test result.

• Korea-Australia Rheology Journal
• /
• 제11권3호
• /
• pp.225-232
• /
• 1999

This study presents 1-dimensional simple model for sheet casting or rectangular fiber spinning process. In order to achieve this goal, we introduce the concept of force flux balance at the die exit, which assigns for the extensional flow outside the die the initial condition containing the information of shear flow history inside the die. With the Leonov constitutive equation that predicts non-vanishing second normal stress difference in shear flow, we are able to describe the anisotropic swelling behavior of the extrudate at least qualitatively. In other words, the negative value of the second normal stress difference causes thickness swelling much higher than width of extrudate. This result implies the importance of choosing the rheological model in the analysis of polymer processing operations, since the constitutive equation with the vanishing second normal stress difference is shown to exhibit the characteristic of isotropic swelling, that is, the thickness swell ratio always equal to the ratio in width direction.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.185-194
• /
• 2004

콘크리트의 크리프에 관한 기존의 연구결과들은 대부분 1축응력이 가해지는 경우에 대한 것으로 콘크리트 구조물 또는 부재가 다축응력 상태에 놓이는 경우에 적용하기가 어려운 점이 있다. 따라서 다축응력 상태의 콘크리트 크리프 특성에 관한 연구가 필요하다. 이 연구에서 다축응력 상태에 놓인 콘크리트의 크리프 특성을 실험을 통해 파악하였다. 세 가지 서로 다른강도를 갖는 배합의 콘크리트에 대해 각각 9개의 실험체를 제작하였으며, 1축, 2축, 3축 응력 상태에서 크리프 실험을 실시하였다. 하중이 가해지는 세 방향에서 시간에 따른 변형률을 측정하였다. 가압시점의 푸아송비와 크리프변형에 기인한 푸아송비 그리고 탄성변형과 크리프변형에 기인한 푸아송비를 구하였으며, 각 콘크리트에 대한 세 가지 푸아송비는 근사적으로 같은 것으로 나타났다. 가압시점의 푸아송비와 전체 변형에 대한 푸아송비는 콘크리트 강도의 증가에 따라 다소 증가하는 경향을 보였으며, 각 푸아송비는 응력상태에 따라 특정한 경향을 나타내지 않았다. 체적성분의 응력과 크리프변형률, 편차성분의 응력과 크리프변형률은 선형의 관계를 나타내었다.