• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.2
• /
• pp.26-37
• /
• 2003

An optimal software release, which is related to the development cost, error detection and correction under the various operation systems, is a critical factor for managing project. This paper described optimal software release issues to predict the release time of large switching system with the system stability point of view and evaluated a timely supply of target system, proper utilization of resources under the software reliability valuation basis. Finally, Using initial failure data, based on the exponential reliability growth model methodology, optimal release time, and analysis of failure data during the system testing and managing methodologies were presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.3
• /
• pp.270-277
• /
• 2015

In this paper, we describe the production of a specific electrostatic-type scanning electron microscope based on miniaturization for application in other types of vacuum equipment. The initial configuration of the SEM starts with a minimal configuration that allows people to view sample images. After improving the stability of the SEM operation and resolution, we conducted experiments on identifying the characteristics and development of an einzel-type condenser lens with reference to the demagnification lens system of an SEM. The experiments were conducted at an acceleration voltage of 5 kV and we found the shape of the lens to be more reliable than a conventional lens. The lens was then added to improve the resolution in the nanometer region. The current measured on the sample was approximately 40 pA and its magnification was 4,000 times.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.408-415
• /
• 2016

The offshore structures exposed to harsh corrosive such as the marine environment is essential for the quality management technique throughout the life cycle of initial design, construction and operation. Also, it should satisfy the design life and ensure the safety of the substructure with optimization of design process. This study focused on optimization of design condition for corrosion protection of wind turbine structure and computational analyzing was performed to evaluate the performance of corrosion protection with utilizing practical experimental data. We expect this analytical study contribute to improve the corrosion maintenance stability and economical efficiency of designing wind turbine structures. As a result, the design of cathodic protection system using sacrificial anodes required accurate identification of current density in order to meet the long term design life, which can be seen that a change of structure surface's coating breakdown factor is one of the key influencing factors.

• Plant Journal
• /
• v.8 no.2
• /
• pp.52-58
• /
• 2012

Pipe means the connection of the tube in order to transfer fluid from one device to another device. The piping stress analysis is to analyze the structural stability considering the location and the features of piping support after completing the piping design, The allowable stresses comply with the requirements of the relevant standards by examining whether the support of the function and location of pipe or re-operation is confirmed. Allowable stresses are to make sure that the maximum stress should not exceed the allowable stress presented in the ASME B31.1 POWER PIPING code. ASME B31.1 POWER PIPING code ensures a smooth stress analysis can be performed during the initial pipe stress analysis as provided in the case of straight pipe to the horizontal distance between the supports. However, because there is no criteria set in the case of curved pipe, the optimum pipe supporting points were studied in this paper. As mentioned about the curved pipe, loads applied to the support of the position of 17% and 83% of the position relative to the elbow part have results similar to the load acting on the support of straight pipe.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.155-185
• /
• 2014

Liability for the manufacture or supply of defective products can arise in two principle ways, in tort and in contract. English law has long regarded shipbuilding contract as agreement for the sale and purchase of goods. The consequence of which is that unless the Buyer and Builder agree otherwise, terms will automatically be implied into the contract between them as to the quality and performance of the completed vessel. The same principle applies to sub-contracts allied to the shipbuilding contract. On the other hand, one case decisions established that ".... a contract to build a ship, though a contract of sale of goods, has also some characteristics of a building contract", Recently the liability of a manufacturer in tort for physical damage i.e. personal injury and damage to property other than alleged to be defective is now well settled in most countries. Accordingly the Builder may face third party claims in tort more regularly than they have in the past, if the statutory implied terms have not been expressly excluded in contract. In such circumstances, it is necessary for the Builder to be prepared with counter measures to secure the stability of the vessel from its design development, building process, delivery and operation etc. The purpose of this paper is, from the case of "MSC Carla", to review product liability, jurisdiction and the initial date of extinctive prescription, then to suggest counter measures to the Builder.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.307-312
• /
• 1993

A fructosyltransferase from Aureobasidium pullulans was immobilized onto a polystyrene-type anionic ion-exchange resin and the production of fructo-oligosaccharides was Investigated by the immobilized enzyme. The optimum pH and the temperature of immobilized enzyme were found to be pH 5.0, $55^{\circ}C$ respectively. The thermal stability of the enzyme was greatly enhanced after immobilization. The reaction profiles of the immobilized enzyme was almost identical to those of the free cells and the soluble enzyme. The immobilized enzymes were stable up to 20 cycles without loss of initial activity in a repeated-batch operation $50^{\circ}C$.

• KSBB Journal
• /
• v.7 no.1
• /
• pp.79-83
• /
• 1992

The characteristics of Erwinia rhapontici cells with $\alpha$-glucosyltransferase activity immobilized in Ca-alginate beads and the performance of two different types of reactor-stirred tank reactor(STR) and packed bed reactor(PBR)-charged with these immobilized cells to produce palatinose from sucrose were investigated. The optimal pH(5.5-6.0) and temperature($30-35^{\circ}C$) showed no appreciable difference between free and immobilized cells. The apparent Km value of the immobilized cells(0.28M) was approximately two times higher than that of free cells(0.13M) at $30^{\circ}C$. The half life of the immobilized cells was found to be 380 h with STR while much greater operational stability was achieved with PBR. Continuous operation of PBR at a space velocity of $0.2h^{-1}$ for 30 days showed only 5% loss of initial activity.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.2
• /
• pp.88-92
• /
• 2010

The forefoot reconstruction is a challenging field for plastic surgeons. Weight bearing tolerability and stability are important factor of choosing reconstruction methods, but cosmetic aspect has to be considered. 51 year old man visited our clinic with extensive degloving injury on right forefoot by roller. The soft tissue defect started from metatarsal area to the toe tip including nails. We harvested the anterolateral thigh flap and transferred it to the forefoot defect area with nerve coaptation. The flap was successful without skin necrosis or other complications. Secondary flap debulking surgery was performed after ten months from initial operation. Patient was satisfied with functional and cosmetic outcomes. The patient was able to wear shoes and walk with adequate sensory recovery. As there is few report about reconstruction of forefoot soft tissue defects, we report a unique case of the anterolateral thigh innervated free flap reconstruction in degloving injury.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.77-81
• /
• 2007

Objective : In a variety of thoracolumbar diseases, corpectomy followed by interbody bone graft and anterior instrumentation has allowed direct neural decompression and reconstruction of the weight-bearing column by short segments fusion. In this study, we compared spinal stability of the two different anterior thoracolumbar instruments : Z-plate and Kaneda device representing plate and two-rods type, respectively. Methods : A retrospective review was performed for all the patients with thoracolumbar diseases or traumas treated with anterior corpectomy, autologous iliac bone graft, and fixation with instruments from 1996 to 2000. For the anterior instrumentation, Z-plate or Kaneda device was used for 24 [M:F=5:9, average age=37] and 12 [M:F=9:3, average age=41] patients, respectively. The plain AP and lateral flexion-extension films were taken immediately after surgery and at each follow-up. The sagittal and coronal Cobb's angles at the operation segments were used to observe the change of initial fixation status. The surgical time length and bleeding amount of the two groups were compared. Intra-operative and post-operative instrument associated complications were evaluated. Student t-test was used for statistical analysis and p-value less than 0.05 was considered to be significant. Results : Mean follow-up durations for Z-plate and Kaneda device were 24 and 21 months, respectively. The fusion rate was 91% for Z-plate and 100% for Kaneda device. Two cases of Z-plate group showed instrumentation failure during the follow up period, in which additional surgery was necessary. The mean differences of sagittal Cobb's angles among the AP images immediate after surgery and at follow-up were 7 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. The mean differences of coronal Cobb's angles were 5 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. No Intra-operative complication has occurred in both groups. There was no difference in surgery time and bleeding amount between two groups. Conclusion : We think that Kaneda device [rod type] is stronger than Z-plate [plate type] to keep the spinal stability after anterior thoracolumbar surgery.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.33-42
• /
• 2007

Mobile ad-hoc network(MANET) can increase independence and flexibility of network because it consists of mobile node without the aid of fixed infrastructure. But, Because of unrestriction for the participation and breakaway of node, it has the difficulty in management and stability which is a basic function of network operation. Therefore, to solve those problems, we suggest a distributed weighted clustering algorithm from a manageable and stable point of view. The suggested algorithm uses distributed weighted clustering algorithm when it initially forms the cluster and uses a concept which is distributed gateway and sub-cluster head to reduce the re-clustering to the minimum which occurs mobile nodes after forming the cluster. For performance evaluation, We compare DCA and WCA with the suggested algorithm on the basis of initial overhead, resubscriber rate and a number of cluster.