• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2431-2435
• /
• 1996

In order to determine the effects of hydrostatic pressure on the mechanical behavior of graphite fiber reinforced composites, the modulus, fracture stress(maximum stress), and fracture strain of graphite/epoxy composites have been determined as a function of pressure. Composite specimens used in this study were 90-deg unidirectional and had a 60% fiber volume fraction. Compressive tests under five different pressure levels were conducted. The result showed the modulus measured from as initial slope of stress-strain curve increased bilinearly with pressure with a break at 200 MPa. It was also found that fracture stress and fracture strain increased in a linear fashion with pressure.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.23-29
• /
• 2001

Cylindrical type of self-controlled restrictor are designed for hydrostatic bearing of grinding wheel spindle. Typical hydrostatic journal bearing with the designed restrictor is analytically model. According to the model, the affect of oper-ation parameters, such as, initial cross distance, supply pressure, diameter of two supply holes, pre-load of spring, and clearance between spindle and housing, on bearing stiffness are analyzed. From the results of the analysis, the optimum conditions of operation parameters that maximize the bearing stiffness are estimated.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.220-225
• /
• 2006

This paper investigates the characteristics of a hydro-mechanical punching process. The hydro-mechanical punching process is divided into two stages: the first stage is the mechanical half piercing in which an upper punch goes down before the initial crack is occurred; the second stage is the hydro punching in which a lower punch goes up until the final fracture is occurred. Ductile fracture criteria such as the Cockcroft, Brozzo and Oyane are adopted to predict the fracture of sheet material. The index values of ductile fracture criteria are calculated with a user material subroutine, VUMAT in the ABAQUS Explicit. The hydrostatic pressure retards the initiation of a crack in the upper region of the blank and induces another crack in the lower region of the blank during the punching process. The final fracture zone is placed at the middle surface of the blank to the thickness direction. The result demonstrates that the hydro-mechanical punching process makes a finer shearing surface than the conventional one as hydrostatic pressure increases.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.159-162
• /
• 2005

The milli-components for electronic and medical device etc. have been manufactured by conventional process. Forming and machining process for those milli-components need tremendous cost and time because products require higher dimensional accuracy than the conventional ones. For instance, conventional mechanical punching process has many drawbacks for applying to high accuracy products. The final radius of hole can be varied and burr which interrupting another procedure is generated. Hydro-mechanical punching process makes possible to reduce amount of burr and obtain the fine shearing surface using the operating fluid. Hydrostatic pressure retards occurrence of initial crack and induces to locate the fracture surface in the middle of sheet to thickness direction. In this paper, Hydro-mechanical punching process is analyzed using finite element method and the effect of hydrostatic pressure is evaluated during punching process. The prediction of fracture is performed adopting the various ductile fracture criteria such as Cockcroft, Brozzo and Oyane's criterion using a user subroutine in ABAQUS explicit.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.598-603
• /
• 2000

This study was conducted to enhance the storage stability and the wholesomeness of salted and fermented shrimp manufactured with different salt levels by high hydrostatic pressure sterilization. The effects of high hydrostatic pressure treatment on the putrefactive bacteria in the fermented shrimps were investigated and the sterilization kinetics was analyzed. The initial microbial counts of the fermented shrimp with 8%, 18% salt aged for 6 weeks at $20^{circ}C$ were $1.6{\times}10^3,\;1.4{\times}10^4$ CFU/g for bacteria grown on Vibrio selective media, $9.3{\times}10^3,\;1.7{\times}10^5$ CFU/g for bacteria grown on Staphylococcus selective media, respectively, and null for bacteria grown on Salmonella selective media. The degree of the sterilization increased with the magnitude of the pressure and the treatment time. The fermented shrimp pressurized at 6,500 atm for 10 min had no detectable bacteria grown on Vibrio and Staphylococcus selective media at $10^2$ CFU/g detecting limit. High hydrostatic pressure sterilization could be analyzed by first order reaction kinetics. The $D_P$ values of the bacteria grown on Vibrio selective media of the fermented shrimp at 18% salt were higher than those at 8% salt, while those of the bacteria grown on Staphylococcus selective media showed an inverse trend. The $z_p$ values of 8% salt fermented shrimp were higher than those of 18% salt for both bacteria grown on Vibrio selective media and Staphylococcus selective media. High hydrostatic pressure treatment could be applied for the sterilization of the fermented shrimp, and the optimum high pressure sterilization condition was 10 min treatment at 6,500 atm.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.425-431
• /
• 1999

Nowadays development of electric and optical devices needs precision more and more. This study focuses on hydrostatic journal bearing of grinding wheel spindle. It presents theoretical analysis about cylinder type self-controlled restrictor to control flux of oil flowing into pockets around the hydrostatic journal bearing. As a result of this analysis, optimal properties to maximize bearing stiffness such as initial cross distance, supply pressure, diameter of two supply holes, pre-load of spring and clearance between spindle and housing can be obtained. Therefore, by using them it is possible to estimate bearing stiffness and the performance of grinding wheel spindle can be improved.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.147-155
• /
• 2009

The buckling and failure of filament wound thick composite cylinders under external hydrostatic pressure were investigated by the finite element analysis and test. ACOS, MSC.NASTRAN, and MSC.MARC were used for finite element analysis. T700 carbon-epoxy filament wound composite cylinders were fabricated to have winding angles of $[\pm30/90]_{FW}$, $[\pm45/90]_{FW}$, $[\pm60]_{FW}$, $[\pm60/90]_{FW}$, and tested to verify the finite element analysis. Among the softwares, ACOS predicted buckling load the best with about 1.7~14.3% deviation from test. Analysis and test shows cylinders do not recover the initial buckling pressure after buckling and directly lead to final failure.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.154-160
• /
• 2020

Background: Korean ginseng (Panax ginseng Meyer) powder is in rising demand because powder forms of foods are convenient to handle and are highly preservable. However, ginseng powder (GP) manufactured using the conventional process of air drying and dry milling suffers nutrient destruction and a lack of microbiological safety. The objective of this study was to prepare GP using a novel process comprised of UV-TiO₂ photocatalysis (UVTP) as a prewashing step, wet grinding, high hydrostatic pressure (HHP), and freeze-drying treatments. Methods: The effects of UVTP and HHP treatments on the microbial population, ginsenoside concentration, and physiological characteristics of GP were evaluated. Results: When UVTP for 10 min and HHP at 600 MPa for 5 min were combined, initial 4.95 log CFU/g-fw counts of total aerobes in fresh ginseng were reduced to lower than the detection limit. The levels of 7 major ginsenosides in UVTP-HHP-treated GP were significantly higher than in untreated control samples. Stronger inhibitory effects against inflammatory mediator production and antioxidant activity were observed in UVTP-HHP-treated GP than in untreated samples. There were also no significant differences in CIELAB color values of UVTP-HHP-treated GP compared with untreated control samples. Conclusion: Combined processing of UVTP and HHP increased ginsenoside levels and enhanced the microbiological safety and physiological activity of GP.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.79-84
• /
• 2012

This study aimed to analyze the nonlinear buckling of ring-stiffened circular cylinders under uniform external pressure, e.g. hydrostatic pressure, considering material nonlinearity and initial imperfection. In the present study, we analyzed the collapse pressure of pressure vessels using ANSYS Workbench, which is a framework of finite element methods. First, linear buckling analysis is performed to find collapse modes of the model. Second, scaling the first mode shape with small factor, geometric model is pre-deformed. And then, by analyzing the nonlinear buckling of the pre-deformed shape, the collapse pressure is estimated. To verify the validity of the analyses, we compared the results with Ross' experimental results. Finally, we applied it to ring-stiffened circular cylindrical shell of the pressure hull of a small submarine.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.73-84
• /
• 2007

For standard piezocones with shoulder filter elements immediately behind the cone tip, general dissipation curves show monotonically decreasing pore pressure from the initial value. However, dilatory dissipation behavior, showing a temporary increase in pore pressure followed by a decrease in the hydrostatic pressure, has been observed in lightly overconsolidated cohesive soils $(1. This unusual dissipation behavior was reported mostly in heavily overconsolidated ground and previous researches were limited to such cases. In this study, the mechanism of dilatory dissipation in lightly overconsolidated cohesive soils was investigated. The relativities of the ground properties evaluated from the CPTu data to the dilatory dissipation were analyzed. And, finite difference analyses on dissipation after cone penetration were performed. It was found that dilatory dissipation occurs in lightly overconsolidated soils since the higher excess pore pressure at the cone face propagates upward to the shoulder filter. Also, it was shown that the ratio of initial excess pore pressure at the cone face to that of the shoulder filter $({\Delta}u_{1i}/{\Delta}u_{2i})$, which is related to overconsolidation ratio (OCR) and hydrostatic pressure $(u_0)$, affects the dilatory dissipation.