• Corrosion Science and Technology
• /
• v.5 no.4
• /
• pp.137-140
• /
• 2006

The effect of pre-existing barrier-type film on porous aluminum oxide film formation during anodization was investigated to control the uniform film growth rate. Initial potential fluctuations during anodization indicated that the breakdown of barrier-film is preceded before the porous formation and the induction time for the porous film growth increases with the increases of pre-existing film thickness. The porous film growth mechanism is lot affected by the presence of barrier film on aluminum surface. In parallel, uniform growth of barrier film underneath the porous structure was attained by two-step anodization processes.

• Biomedical Science Letters
• /
• v.15 no.2
• /
• pp.105-112
• /
• 2009

The screening of the anti-cancer activity of the chemical library provided 2-thio-4-aminopyrimidine as the initial hit. The confirmation of structure and biological effect of hit was performed by synthesis and biological evaluation. The optimization of hit was performed by derivatization of substituents while keeping the core structure. The evaluation of growth inhibitory activity was carried out using SRB assay against 6 human cancer cell lines and human fibroblast. The growth inhibitory activity of compounds showed substituent dependency and more than 5 compounds showed complete growth inhibition of cancer cell lines at 10 ${\mu}M$ concentration. Chemical library screening followed by synthetic modification provided possibility that 2-thio-4-aminopyrimidine can be used as a new scaffold for the development of anti-cancer agent.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.307-310
• /
• 2002

In order to obtain high density seed cells for biofiltration, we studied batch and fed-batch culture of P. putida. Studies were carried out to find optimum fermentation conditions such as pH, concentration of glucose and agitation speed. Specific growth rate of P. putida was dependent on agitation speed and a high rpm of 300 was necessary to carry out the efficient aerobic growth of P. putida. Specific growth rate was highest at pH 7. Feeding glucose and yeast extract continuously at the initial growth phase was the most effective way to get high cell density of P. putida.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.4
• /
• pp.231-233
• /
• 2002

The potential of calcium peroxide to act as an agent for waterblooming control was In-vestigated by examining the growth inhibition of Microcystis aerusinosa. Due to the chemical nature of calcium peroxide, it can remove dissolved phosphate by forming an Insoluble precipitate, generating radicals, coagulant, and oxygen as byproducts as it dissolves in water. The growth of M. aerusinosa was severely inhibited and the chlorophyll-n concentration was drastically decreased in the presence of calcium peroxide. With 200 ppm of calcium peroxide dosage, a chlorophyll-a concentration of 1,700 mg/m$^3$ was lowered to below 10% of its initial concentration after 4 days. One possible explanation for this growth Inhibition is the removal of the available phosphate by calcium peroxide.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.120-126
• /
• 1997

This paper examines the crack growth behavior of 7075-T651 aluminum alloy under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investgated by compliance method. The applied initial stress ratios are R=-0.5, R=0.0 and R=0.25 Crack length($\alpha$), effective stress intensity factor range(ΔKeff), ratio of effective stress intensity factor range(U) and crack growth rate(d$\alpha$/dN) etc. are inspected fracture mechanics estimate.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.155-162
• /
• 1995

Redistribution of residual stress and its effects during fatigue crack propagates from tensile residual stress region in weldment are investigated. Tests are performed by using welded CCT specimens of structual rolling steel (SS400) and it makes fatigue crack propagate from tensile residual stress region. For this study tension-tension loading type is selected by external loading condition and magnetizing stress indicator is used correctly to measure redistribution of residual stress according to fatigue crack growth and number of loading cycles. From this result, it is proved that redistribution of residual stress is mainly consist of residual stress released by fatigue crack growth. When fatigue crack propagates from tensile residual stress region residual stress are redistributed and it makes fatigue crack growth rate largely increase. Fatigue crack growth rate is low in case of redistributed residual stress compare with initial distributed residual stress.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.494-496
• /
• 1996

The purpose of this study is to investigate the effect of process conditions on pore distribution in porous silicon layer prepared by electrochemical reaction. Porous silicon layers formed on p-type silicon wafer show the network structure of fine porse whose diameters are less than 100${\AA}$. In n-type porous silicon, selective growth was found on the pore surface by wet etching process after PR patterning. And numerical method showed high current density on the pore tip. With this result we confirmed that pore formation has two steps. First step is the initial attack on the surface and second step is the directional growth on the pore tip.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.373-382
• /
• 1999

Nucleation and growth process of sticking particle in ferritic stainless steels was investigated using a two disk type hot rolling simulator. The sticking behavior was strongly dependent on the surface roughness of a high speed steel roll(HSS) and the oxidation resistance of the ferritic stainless steels. A hot rolling condition with the lower oxidation resistance of the stainless steel and the higher surface roughness of HSS roll was more sensitive to sticking occurrence. It was also illucidated that the initial sticking particles were nucleated at the scratches formed on the roll surface and were served as the sticking growth sites. As rolling proceeded, the sticking particles grew sites. As rolling proceeded, the sticking particles grew by the process that the previous sticking particles provided the sticking growth sites.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.54-61
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 aluminum alloy for small tensile overload under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investigated by compliance method. The applied initial stress ratios are R=-0.5 R=0.0 and R=0.25 Crack length, effective stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc, are inspected with fracture mechanics estimate.

• Korean Journal of Microbiology
• /
• v.5 no.1
• /
• pp.34-38
• /
• 1967

Theoretical analysis reported in this paper is on the varities of the growth rate of Chlorella ellipsoidea due to the amount of available phosphorus for the purpose of the continual mass culture. Available phosphorus in the culture media of the Chlorella was also estimated at a limiting factor as this experiment. The equation between the concentration of Chlorella n and growth period t is $\frac{dn}{dt}=Kn$, and the functional relation between the Specific growth rate K and steady state period T is the following: $K=\frac{2.303}{T}$log\frac{n}{no}$ ($n_o$=initial concentration).