• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.11-22
• /
• 2013

EAREF(East-Asia Reference Frame) is based on the Eurasian Plate which is considered relatively stable. It is managing the coordinate reference system by a specific epoch through the networking of GNSS CORS of the East-Asia region covering North-east and South-east Asia. Also it'll be the goal to assist integrating the geospatial information management. This study aims to estimate the precise coordinates of EAREF in the East-Asia region at the epoch of January 1st of 2012 (2012.0) after the Great East Japan Earthquake. It is related to 1st stage study for construction of data sets and made up the data processing techniques through the various experiments to upgrade the accuracy. Based on the results of the study, we calculated the initial precise coordinates of the EAREF network from the 2012.0 epoch covering the East-Asia region. The accuracy of the estimated coordinates was compared with the weekly solution provided by the IGS analysis centre. The differences were 0.004m, 0.007m and 0.009m at the directions of X, Y and Z respectively. In addition, this study reviews the next procedure how to implement and upgrade the EAREF network.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.136-146
• /
• 2013

In this paper, the residual delay compensation algorithm is proposed for FX-type KJJVC. In case of initial version as that design algorithm of KJJVC, the integer calculation and the cos/sin table for the phase compensation coefficient were introduced in order to speed up of calculation. The mismatch between data timing and residual delay phase and also between bit-jump and residual delay phase were found and fixed. In final design of KJJVC residual delay compensation algorithm, the initialization problem on the rotation memory of residual delay compensation was found when the residual delay compensated value was applied to FFT-segment, and this problem is also fixed by modifying the FPGA code. Using the proposed residual delay compensation algorithm, the band shape of cross power spectrum becomes flat, which means there is no significant loss over the whole bandwidth. To verify the effectiveness of proposed residual delay compensation algorithm, we conducted the correlation experiments for real observation data using the simulator and KJJVC. We confirmed that the designed residual delay compensation algorithm is well applied in KJJVC, and the signal to noise ratio increases by about 8%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1469-1473
• /
• 2004

We suggest how to program off-line robot path along shoes' outsole shape in the footwear buffing process by a 5-axis microscribe system like robot arms. This microscribe system developed consists a 5-axis robot link with a turn table, signal processing circuit, PC and an application software program. It makes a robot path on the shoe's upper through the movement of a microscribe with many joints. To do this, first it reads 5-encoder's pulse values while a robot arm points a shoes' outsole shape from the initial status. This system developed calculates the encoder pulse values for the robot arm's rotation and transmits the angle pulse values to the PC through a circuit. Then, Denavit-Hartenberg's(D-H) direct kinematics is used to make the global coordinate from robot joint one. The determinant is obtained with kinematics equation and D-H variable representation. To drive the kinematics equation, we have to set up the standard coordinates first. The many links and the more complicated structure cause the difficult kinematics problem to solve in the geometrical way. Thus, we can solve the robot's kinematics problems efficiently and systematically by Denavit-Hartenberg's representation. Finally, with the coordinate values calculated above, it can draw a buffing gauge-line on the upper. Also, it can program off-line robot path on the shoes' upper. We are subjected to obtaining shoes' outline points, which are 2 outlines coupled with the points and the normal vector based on the points. These data is supposed to be transformed into .dxf file to be used for data of automatic buffing robot. This system developed is simulated by using spline curves coupled with each point from dxf file in Autocad. As a result of applying this system to the buffing robot in the flexible footwear manufacturing system, it can be used effectively to program the path of a real buffing robot.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.119-130
• /
• 2015

In recent years, the attention on the applications of the national or international standards to water-related information technology in practice has more increased. In particular, as the demand on spatial information technology including content development, receiving, disposal and distribution has increased, the importance of standardization has been also emphasized. However, compared with attention and demand on standardization in spatial information technology, studies on development and application of standardization are still at the initial stage. Accordingly, this study attempted to investigate the trends of international standards developed and established by International Organization for Standardization(ISO) and Open Geospatial Consortium(OGC), and to derive the adaptable integrated management standard technology for water hazard information platform. For this, we investigated big data, NoSQL, and cloud technology for the observed data provision. Furthermore, OGC WxS standard technologies for spatial information web service and ISO standards for spatial information format were investigated. Based on these investigations, we examined the strategies and plans to apply and establish the standardization for information provision.

• Clean Technology
• /
• v.26 no.3
• /
• pp.186-195
• /
• 2020

The isothermal adsorption, dynamic, and thermodynamic parameters of Acid black (AB) and Quinoline yellow (QY) adsorption by activated carbon were investigated using the initial concentration, contact time, temperature, and pH of the dyes as adsorption parameters. The adsorption equilibrium data fits the Freundlich isothermal adsorption model, and the calculated Freundlich separation factor values found that activated carbon can effectively remove AB and QY. Comparing the kinetic data showed that the pseudo second order model was within 10% error in the adsorption process. The intraparticle diffusion equation results were divided into two straight lines. Since the slope of the intraparticle diffusion line was smaller than the slope of the boundary layer diffusion line, it was confirmed that intraparticle diffusion was the rate-controlling step. The thermodynamic experiments indicated that the activation energies of AB and QY were 19.87 kJ mol^-1 and 14.17 kJ mol^-1, which corresponded with the physical adsorption process (5 ~ 40 kJ mol^-1). The adsorption reaction was spontaneous because the free energy change in the adsorption of AB and QY by activated carbon was negative from 298 to 318 K. As the temperature increased, the free energy value decreased resulting in higher spontaneity. Adsorption of AB and QY by activated carbon showed the highest adsorption removal rate at pH 3 due to the effect of anions generated by dissociation. The adsorption mechanism was electrostatic attraction.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.95-101
• /
• 2015

Purpose - This study provides evidence of the impact of the mandatory adoption of Korean equivalents to International Financial Reporting Standards (K-IFRS) on accounting quality. K-IFRS uses fair value as a basis of measurement and is characterized by principle-based standards. These characteristics can lead to a decrease in conservatism. Therefore, this study aims to examine whether or not there is a change in the level of conservatism before and after the enforcement of K-IFRS (2007~2014). By comparing 2007 through 2008 and 2013 through 2014 (excluding 2009 to 2012), we test "the temporary adjustment phenomenon" and document an overall decline in the degree of conservatism after the adoption of K-IFRS. Research design, data, and methodology - Our sample is comprised of data of all listed Korea Composite Stock Price Index (KOSPI) manufacturing distribution companies in Korea from 2007 to 2014, which yields the pooled sample of 4,412 (panel A) and 1,915 (panel B) firm-year observations for hypotheses 1 and 2. In line with recent literature, we adopt the Givoly and Hayn (2000) model, which recomputes the non-operating accruals, excluding two components that are most likely to capture the effect of restructuring activities: special items and gains or losses from discontinued operations. In addition, we also use these variables: SIZE, LEV, INV_CYCLE, ROA, OWN, and FOR. Results - Our sample period spans 2007 to 2014. This offers evidence on the effect of the mandatory adoption of IFRS on conservatism. Our findings can be summarized as follows. First, in panel A, for mandatory K-IFRS adoption (2011), we do not find any significant evidence of conservatism. We can guess that the "temporary adjustment phenomenon" is the reason that we do not find significant evidence of conservatism. Second, we investigate panel B from 2009 to 2012. We document an overall decline in the degree of conservatism after the adoption of K-IFRS. We can assume that these results are due to "the temporary adjustment phenomenon." Conclusions - This study finds that conservatism significantly decreased after IFRS adoption. In particular, this study makes the initial effort to elucidate "the temporary adjustment phenomenon" to analyze the effect of K-IFRS on conservative accounting. We argue that K-IFRS are conceptually conservative but that inappropriate application of the conservatism principles is likely to prevent financial reporting from reaching the level of conservatism targeted by the IASB. Overall, this paper contributes to the literature on IFRS and can be useful to capital market supervisors who are monitoring the trends of the firms implementing K-IFRS. Additionally, our results inform stakeholders of the potentially negative effect of the greater flexibility permitted by IFRS and/or lack of appropriate enforcement on key dimensions of accounting quality. This has important implications for Korean regulators and standard setters as they review the cost and benefits of IFRS. Our study also sheds light on the importance of the institutional environment in achieving the targeted objectives for improving financial reporting quality.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.723-730
• /
• 2017

The batch experiments by response surface methodology (RSM) have been applied to investigate the influences of operating parameters such as temperature, initial concentration, contact time and adsorbent dosage on 2,4-dichlorophenol (2,4-DCP) adsorption with an activated carbon prepared from waste citrus peel (WCAC). Regression equation formulated for the 2,4-DCP adsorption was represented as a function of response variables. Adequacy of the model was tested by the correlation between experimental and predicted values of the response. A fairly high value of $R^2$ (0.9921) indicated that most of the data variation was explained by the regression model. The significance of independent variables and their interactions were tested by the analysis of variance (ANOVA) and t-test statistics. These results showed that the model used to fit response variables was significant and adequate to represent the relationship between the response and the independent variables. The kinetics and isotherm experiment data can be well described with the pseudo-second order model and the Langmuir isotherm model, respectively. The maximum adsorption capacity of 2,4-DCP on WCAC calculated from the Langmuir isotherm model was 345.49 mg/g. The rate controlling mechanism study revealed that film diffusion and intraparticle diffusion were simultaneously occurring during the adsorption process. The thermodynamic parameters indicated that the adsorption reaction of 2,4-DCP on WCAC was an endothermic and spontaneous process.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.3-11
• /
• 2018

This study aims to investigate whether there is intensionally changing eye - gaze on the cafe space images with floor finishing materials. In the Yarbus' experiment, he argued that changing information that an observer is asked to obtain from an image changes pattern of eye movements. Based on the scan path evidence, this research have questions as (1) the difference of visual attention on finishing floor material stimulus, (2) visual attention of initial activity time and type of movement paths on AOIs, and (3) visual relation floor area with another AOIs. Eye movements were recorded with the SMI REDn Scientific, which sampled eye position at 30Hz and lasted 2 minutes(120s). Although viewing was binocular, only the right eye was tracked. Of the 66 observers(mean age 22 years, standard deviation: ${\pm}1.82$) who participated in the experiment done by the four point calibration and validation procedures at the beginning tasks. Analyzing qualitative data from the number of fixation and duration on AOIs divided into four parts (AOI I-Floor, AOI II-Wall, AOI III-Ceiling, and AOI IV-Counter) in the stimulus. The results from this experiment analyzed as follows. First, it was significant in the difference of the average number of AOIs fixation times observed for the spatial image using the wood tile flooring material and the polishing tile. The wood tile flooring of stimulus had higher fixation number on AOI-II, AOI-III, and AOI-IV than the polishing tile. On seeing AOI-I was higher attention in the polishing tile stimulus. Second, the observers examined AOI-II intensively in both stimuli. However, the visual intensity was also followed by on the AOI-IV and AOI-I in the wood tile flooring stimulus, and on AOI-I, AO-IV in the polishing tile. Third, visual attention data on each AOIs have divided into the time range of "5 sec" for both images. In the wood tile stimulus, the horizontal movement path followed by AOI-II, AOI-IV, and AOI-II. In the polished tile stimulus, the movement path followed by moving vertically to AOI-II, AOI-I, and AOI-II. This study approached meaningfully and found out the characteristics of visual attention, according to the different intentions of visual attention, the relationship pathways of visual mechanism appeared and also activated by eye-tracking experiments.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.64-91
• /
• 2018

This study explores the interactive pattern among social issue, academic research, and governmental policy on science and technology during the last 20 years. In particular, we try understand wether the science and technology policy research and governmental policy meets social needs appropriately. In order to do this, we have collected text data from news articles, papers, and governmental documents. Based on these data, social network analysis and cluster analysis has been carried out. According to the results, we have found that science and technology policy researches tend to focus on fragmented technological innovation meeting urgent practical needs at the initial stage. However, recently, the main characteristics of science and technology policy research shows co-evolutionary patterns responding to society. Furthermore, time lag also has been observed in the process of interaction among the three bodies. Based on these results, we put forward some suggestions for upcoming researches in science and technology policy. Firstly, analysis levels are needed to be shifted from micro level to mezo or macro level. Secondly, more research efforts are required to be focused on policy process in science technology and its public management. Finally, we have to enhance the sensitiveness to social issues through studies on agenda setting in science and technology policy.

• Journal of Korea Water Resources Association
• /
• v.48 no.7
• /
• pp.581-593
• /
• 2015

This study constructs the drought outlook system using ESP(Ensemble Streamflow Prediction) method and evaluates its utilization for drought prediction. Historical Runoff(HR) was estimated by employing LSM(Land Surface Model) and the observed meteorological, hydrological and topographical data in South Korea. Also Predicted Runoff(PR) was produced for different lead times(i.e. 1-, 2-, 3-month) using 30-year past meteorological data and the initial soil moisture condition. The HR accuracy was higher during MAM, DJF than JJA, SON, and the prediction accuracy was highly decreased after 1 month outlook. SRI(Standardized Runoff Index) verified for the feasibility of domestic drought analysis was used for drought outlook, and PR_SRI was evaluated. The accuracy of PR_SRI with lead times of 1- and 2-month was highly increased as it considered the accumulated 1- and 2-month HR, respectively. The Correlation Coefficient(CC) was 0.71, 0.48, 0.00, and Root Mean Square Error(RMSE) was 0.46, 0.76, 1.01 for 1-, 2- and 3-month lead times, respectively, and the accuracy was higher in arid season. It is concluded that ESP method is applicable to domestic drought prediction up to 1- and 2-month lead times.