• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.363-377
• /
• 2021

The present study investigated the effects of dynamic tubing gait training(I and II) on the postural alignment, gait, and quality of life in chronic patients with Parkinson's disease. This study is based on the case study that recruited a total of 3 patients with chronic Parkinson's disease (Hoehn and Yahr Stage of 1 to 3 each one person). Dynamic tubing gait training (I and II) applied to chronic patients with Parkinson's disease for 25 sessions, 30 minutes a day, 5 days a week, over 5 weeks period. To investigate the effects of this study, evaluating using the postural alignment test, muscle activity tests, gait analysis, and quality of life scale for patient with Parkinson's disease. After the intervention of Dynamic tubing gait training (I and II), Trunk flexion was decreased. Also, during walking from initial contact (IC) to mid stance (Mst), muscle activity of Quadriceps, Hamstring, and Tibialis Anterior (TA) was increased and muscle activity of Gastrocnemius was decreased. The muscle activation of Erector Spinae (ES T12, L3) was increased in the H&Y I and III stages and decreased in the H&Y II stage. Length of gait line, single support line, ant/post position and lateral symmetry of center of pressure (COP) parameters improved. The spatio-temporal gait parameters including of step length, stride length, and velocity was increased, and cadence decreased. Further the quality of life of patients with Parkinson's disease was improved. Based on these findings, Dynamic tubing gait training (I and II) could be applied as a new approach to improve posture, gait, quality of life in chronic patients with Parkinson's disease for more than 5 years, whose drug resistance is halved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.37-46
• /
• 2024

This study investigates the evolution of concrete damage due to chloride-induced steel corrosion through Impact-echo (IE) testing. Three reinforced concrete specimens, each measuring 1500 mm in length, 400 mm in width, and 200 mm in thickness, were fabricated using three concrete mixture proportions of blended cement types: ordinary Portland cement, ground granulated blast-furnace slag and fly ash. Steel corrosion in the concrete was accelerated by impressing a 0.5 A current following a 35-day cycle of wet-and-dry saturation in a 3% NaCl solution. Initial IE data collected during the saturation phase showed no significant changes, indicating that moisture had a minimal impact on IE signals and highlighting the slow progress of corrosion under natural conditions. Post-application of current, however, there was a noticeable decline in both IE peak frequency and the P-wave velocity in the concrete as the duration of the impressed current increased. Remarkably, progressive monitoring of IE proves highly effective in capturing the critical features of steel-corrosion induced concrete deterioration, such as the onset of internal damages and the rate of damage propagation. These results demonstrate the potential of progressive IE data monitoring to enhance the reliability of diagnosing and prognosticating the evolution of concrete damage in marine environment.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.3
• /
• pp.189-199
• /
• 2024

Purpose : This study aimed to investigate the test-retest reliability, minimal detectable change (MDC), and the effect of turning direction on the time and number of steps taken during the 180 ° turn test in subacute stroke patients. Additionally, it examined the concurrent validity of the 180 ° turn test. Methods : The study included 28 subacute stroke patients. The test-retest reliability of the 180 ° turn test according to the direction of rotation (paretic and non-paretic sides) by comparing the consistency between the initial assessment and a reassessment conducted 7 days later. Concurrent validity was examined by assessing the correlation of the 180 ° turn test with the Fugl-Meyer assessment of lower extremity (FMA-L/E), Berg balance scale (BBS), 10-meter walk test (10 mWT), and timed up and go test (TUG). Results : The ICC for the time taken to turn 180 ° to the affected and unaffected sides were 0.971 and 0.918, respectively, indicating excellent reliability. The ICC for the number of steps were 0.944 and 0.932, respectively. The MDC for the time taken were 0.33 seconds (affected side) and 0.67 seconds (unaffected side). The MDC for the number of steps were 0.49 (affected side) and 0.63 (unaffected side). The paired t-test showed the limited community ambulator group took significantly longer to turn to the unaffected side (p<.048). Significant correlations were found between the 180 ° turn test and FMA-L/E (r= -0.395 to -0.416), BBS (r= -0.622 to -0.684), 10 mWT (r= 0.720 to 0.730), and TUG (r= 0.684 to 0.790) (p<.05 to .01). Conclusion : The 180 ° turn test demonstrated excellent test-retest reliability and high validity when correlated with other functional measures in subacute stroke patients. MDC values indicated high reliability. Faster walking speeds (≥0.95 m/s) were unaffected by turning direction, while slower speeds (<0.58 m/s) showed significant effects. The 180 ° turn test is a simple, sensitive, and reliable tool for evaluating turning ability in subacute stroke patients.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1151-1163
• /
• 2020

Purpose This study aimed to evaluate changes of subprosthetic pannus on cardiac CT and determine its relationship to echocardiographic findings in patients with mechanical aortic valve replacement (AVR). Materials and Methods Between April 2011 and November 2017, 17 AVR patients (56.8 ± 8.9 years, 12% male) who showed pannus formation on CT and had undergone both follow-up CT and echocardiography were included. The mean interval from AVR to the date of pannus detection was 10.5 ± 7.1 years. In the initial and follow-up CT and echocardiography, the pannus extent and echocardiographic parameters were compared using paired t-tests. The relationship between the opening angle of the prosthetic valve and the pannus extent was evaluated using Pearson correlation analysis. Results The pannus extent was significantly increased on CT (p < 0.05). The peak velocity (3.9 ± 0.8 m/s vs. 4.2 ± 0.8 m/s, p = 0.03) and mean pressure gradient (36.4 ± 15.5 mm Hg vs. 42.1 ± 15.8 mm Hg, p = 0.03) were significantly increased. The mean opening angles of the mechanical aortic leaflets were slightly decreased, but there was no statistical significance (73.1 ± 8.3° vs. 69.4 ± 12.1°, p = 0.12). The opening angle of the prosthetic leaflets was inversely correlated with the pannus extent (r = -0.57, p < 0.001). Conclusion The pannus extent increases over time, increasing transvalvular peak velocity and the pressure gradient. CT can be used to evaluate the pannus extent associated with hemodynamic changes that need to be managed by surgical intervention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1082-1090
• /
• 2009

Peak expiratory flow rate(PEF) is a very important diagnostic parameter obtained from the forced vital capacity(FVC) test. The expiratory flow rate increases during the short initial time period and may cause measurement error in PEF particularly due to non-ideal dynamic characteristic of the transducer. The present study evaluated the initial rise slope($S_r$) on the flow rate signal to compensate the transducer output data. The 26 standard signals recommended by the American Thoracic Society(ATS) were generated and flown through the velocity-type respiratory air flow transducer with simultaneously acquiring the transducer output signal. Most PEF and the corresponding output($N_{PEF}$) were well fitted into a quadratic equation with a high enough correlation coefficient of 0.9997. But only two(ATS#2 and 26) signals resulted significant deviation of $N_{PEF}$ with relative errors>10%. The relationship between the relative error in $N_{PEF}$ and $S_r$ was found to be linear, based on which $N_{PEF}$ data were compensated. As a result, the 99% confidence interval of PEF error was turned out to be approximately 2.5%, which was less than a quarter of the upper limit of 10% recommended by ATS. Therefore, the present compensation technique was proved to be very accurate, complying the international standards of ATS, which would be useful to calibrate respiratory air flow transducers.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.2
• /
• pp.89-96
• /
• 2002

The adsorption characteristics of sodium chloride into Ca-alginate beads have been investigated and the result were as follows: Sodium chloride uptake by Ca-alginate beads increased with time. The highest uptake volume of sodium chloride was 4.2g after 10 minutes. The uptake volume by Fe, Ca, Ba, and Sr-alginate beads was 5.6g, 4.2g, 4.2g and 4.0g, respectively but in case of Fe-alginate beads, the induced hydrogel beads were very fragile and the strength of Fe-alginate beads were weaker than Ca- and Ba-alginate beads. Mg-alginate bead was not formed and Ca-, Ba- and Sr-alginate beads had a similar uptake volume about 4.2g, respectively. The uptake volume of sodium chloride by CaCl$_2$concentration(0.1M. 0.2M and 1M), curing solution, was 4.8, 4.2g and 4.1g, respectively. The uptake volume by sodium alginate concentration(0.6%, 1% and 2%) was 2.8g, 4.0g, and 4.4g, respectively and Ca-alginate bead size was not effected in uptake sodium chloride. The uptake rate on initial sodium chloride concentration(4%, 8%, 12% and 16%) was 30%, 28%, 27% and 25%, respectively. The uptake rate on basic pH(10.0) was higher than when compared to other neutral pH(6.8) and acidic pH(4.0). The initial uptake velocity of sodium chloride from immobilization beads with salt resistant bacteria was lower than that of non-immobilization beads. The uptake rate of sodium chloride was decreased according to elongation of curing time. Reusability of Ca-alginate beads was possible but according to reutilization, the salt uptake volume of beads was also decreased. The uptake volume of sodium chloride from Doengjang by Ca-alginate beads on time course(3, 6, 12, and 24 hour) was revealed 5g, 6g, 7g and 7g, respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.171-178
• /
• 2013

In this study, the sludge that occurs in the initial operation of coagulation system developed for the treatment of CSOs were returned to the flocculation reactor. The purposes of this study were to analyze the Characteristics of flocs that are generated through the recycling sludge and settling characteristics of sludge, and to evaluate the possibility that high concentrations of particulate matter in the initial inflow of CSOs could be used as an weighted coagulant additive. As a result, the concentration of treated CSOs pollutants at the beginning of the CSOs influent with a large amount of particulate matter over 20 ${\mu}m$ was low, after gradually increasing the concentrations of them. The flocs generated from the sludge return were similar in size compared to flocs generated through injection of micro sands, and settling velocity in case of return sludge injection was decreased from 55.1 cm/min to 21.5 cm/min. SVI value of the sludge accumulated at the bottom of the sedimentation tank was 72, and settled sludge volume decreased rapidly due to the consolidation of sludge to the time it takes to 10 minutes. these mean that sludge used for recycling has good settling characteristic. A condition of returned sludge which is 0.1% return of 0.3% extraction was formed in the balance of settlement and extraction. In this case, This condition was to be adequate to maintain the proper concentration such as 100~200 mg/L of TS and 50~100 mg/L of VS in the flocculation reactor. The usage of the return sludge containing particulate matters of CSOs as an weighted coagulant additive was able to secure a stable treated water quality despite the change of influent water quality dynamically. Furthermore, it can be expected to reduce the alum dosage along with the sludge production.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.323-335
• /
• 1983

The inhibitory effects of the extract and crude saponin of red and white ginsengs on lipoperoxide formation in vitro and in vivo were studied and correlated with anti-aging. To this end, antioxidant activity, induction period and lipoperoxide were measured by the methods of EDA, POV and TBA value. And also superoxide dismutase and peroxidase activity were measured by pyrogallol autoxidation method (${\Delta}A$ 420/min) and initial velocity(${\Delta}A$ 436/min), respectively. From HPLC analysis, the PT/PD ratio of red and white ginsengs was found to be 0.561% and 0.401%, respectively, and red ginseng increased the PT/PD ratio in comparison with white ginseng. The EDA activity of red ginseng was higher than that of white ginseng; red ginseng showed stronger antioxidative effect than white ginseng. The inhibitory effect of red ginseng was lower than that of white ginseng during the induction period. It was proved that high molecular coloring substance was deeply related to the initial stage of lipoperoxidation. There was no significant difference between red and white ginsengs in both in vitro and intraperitoneal administration experiments, and red ginseng was more effective than white ginseng in longterm administration. And also inhibitory effect on lipoperoxide formation was mainly occurred in liver, suggesting that the function of liver played an important role in anti-aging actions. From the measurement of superoxide dismutase(SOD) activity for both ginseng groups intraperitoneally and orally administered, it was found that red ginseng group administered extract and crude saponin showed remarkable inhibitory effects in comparison with white ginseng. In particular, orally administered group showed more stronger inhibitory effect on lipid peroxidation in comparison with intraperitoneally administered group. It was also found that the continuous oral administration was more effective than temporary administration. Red ginseng was more notable anti-aging effect in comparison with white ginseng in vivo, and this may be due to the increase of SOD activity in rat-liver. Peroxidase activity also showed similar trend to SOD activity in vitro and in vivo experiments. Red ginseng was not only superior to white ginseng for preservation but also for biochemical and pharmaceutical efficacy.

• Clinical and Experimental Pediatrics
• /
• v.49 no.3
• /
• pp.305-311
• /
• 2006

Purpose : GnRH analogues(GnRHa) are used to treat central precocious puberty(CPP). However, in some patients, the GV decrease is so remarkable that it impairs predicted adult height(PAH); and there fore, the addition of growth hormone(GH) is suggested. We analysed the growth changes during two years and final adult height(FAH) in girls with idiopathic CPP treated with combined therapy, compared with those of girls treated with GnRHa alone. Methods : For the analysis, we classified the patients, who was treated for longer than two years, into three groups depending on the initial PAH and combination of GH; PAH_L, treated with GnRHa and PAH less than midparental height(MPH) - 5 cm. PAH_H, treated with GnRHa and PAH greater than MPH - 5 cm. GnRHa＋GH, combined GH treatment, regardless of PAH before treatment. We analysed the GV and PAH change during the first two years and FAH. Results : In PAH_L, the PAH(SDS) at first year of therapy was significantly increased to $153.5{\pm}6.5cm(-1.4{\pm}1.3)$ from $149.7{\pm}6.4cm(-2.1{\pm}1.3)$ before treatment(P=0.004). In PAH_H, there was no significant increase in PAH during the two years of treatment. During the first year of combination of GH and GnRHa, GV and PAH increased significantly. We observed significant increases in FAH, comparing to the initial PAH in the PAH_L and GnRHa＋GH groups. The height gains(FAH - initial PAH) were significantly higher in the PAH_L and GnRHa＋GH groups than that in the PAH_H group. Conclusion : This study suggests the FAH and height gains are improved in patients, whose predicted adult height before treatment was shorter than those with higher predicted adult height, with the treatment of GnRHa alone or in combination with GH. GH could not improve the final adult height, but compensated the growth in patients whose growth velocity was decelerated by GnRHa alone.