• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.781-791
• /
• 2021

This study aims to analyze the relationship between the business cycles of the ASEAN +3 countries. In addition, the effects of the spillover value on the coincident indicators are determined. This study employs secondary data and uses multivariate time series of five ASEAN countries, namely, Indonesia, Malaysia, Singapore, Thailand, and the Philippines. The proxy was the real gross domestic product (GDP) collected annually from the CEIC, the IMF, and the World Bank for the period from 1964 to 2016. The data was plotted against two time periods, 1964-1998 as the pre-crisis period, and 1999-2016 as the post-crisis period. The index data was changed to the base year 2010. The data was subsequently separated from the trends and the cyclic components. The cyclic components were obtained by using Hondrick-Prescott filter, and them were further analyzed. The analytical method used was Contemporaneous and Cross-Correlation tools. The results showed that, before and after the crisis, the value of the business cycle correlation between ASEAN +3 countries was stronger and moved together at the same level of lag value. The implication of this research was an initial finding of the ASEAN +3 countries' prerequisites for the formation of a common currency.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.565-573
• /
• 2017

This paper presents a multistage in-flight alignment (MIFA) method for a strapdown inertial navigation system (SDINS) suitable for moving vehicles with no initial attitude references. A SDINS mounted on a moving vehicle frequently loses attitude information for many reasons, and it makes solving navigation equations impossible because the true motion is coupled with an undefined vehicle attitude. To determine the attitude in such a situation, MIFA consists of three stages: a coarse horizontal attitude, coarse heading, and fine attitude with adaptive Kalman navigation filter (AKNF) in order. In the coarse horizontal alignment, the pitch and roll are coarsely estimated from the second order damping loop with an input of acceleration differences between the SDINS and GPS. To enhance estimation accuracy, the acceleration is smoothed by a scalar filter to reflect the true dynamics of a vehicle, and the effects of the scalar filter gains are analyzed. Then the coarse heading is determined from the GPS tracking angle and yaw increment of the SDINS. The attitude from these two stages is fed back to the initial values of the AKNF. To reduce the estimated bias errors of inertial sensors, special emphasis is given to the timing synchronization effects for the measurement of AKNF. With various real flight tests using an UH60 helicopter, it is proved that MIFA provides a dramatic position error improvement compared to the conventional gyro compass alignment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.24-33
• /
• 2002

The cell search scheme for W-CDMA consists of the following three stages: slot synchronization(1st stage), group identification and frame boundary detection(2nd stage), and long code identification(3rd stage). The performance of the cell search when a mobile station is switched on, which is referred to as initial cell search, is decreased by the initial frequency and timing error. In this paper, we propose the pipeline structured initial cell search scheme using time trackers to compensate for the impact of the initial timing error in the stage 2 and stage 3. The simulation results show that the performance of the proposed scheme is maximal 1.5dB better than that of the conventional one when the initial timing error is near ${\pm}T_c$/2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.983-990
• /
• 2008

In communication systems, initial acquisition is required for the reliable transmission performance, and the analysis of the acquisition performance over various communication environments including different signal-to-noise ratios plays an important role in communication system design. Usage of differential correlation methods in initial synchronization procedure is desired when frequency offsets exist, and additional performance improvement can be achieved through proper modifications of conventional correlation schemes. In this paper, we derive the error probability of the initial acquisition and express it in terms of the Marcum Q-function, via statistical modeling of the differential correlator output. The result is generalized to the error probabilities of the extended differential correlation methods using the complex- and magnitude-sum of the correlator outputs. The derived probabilities can be applied for the acquisition performance verification of various communication systems including the DVB-S2 standard.

• Clinical and Experimental Reproductive Medicine
• /
• v.41 no.4
• /
• pp.158-164
• /
• 2014

Objective: To assess whether an early GnRH antagonist start leads to better follicular synchronization and an improved clinical pregnancy rate (CPR). Methods: A retrospective cohort study. A total of 218 infertile women who underwent IVF between January 2011 and February 2013. The initial cohort (Cohort I) that underwent IVF between January 2011 and March 2012 included a total of 68 attempted IVF cycles. Thirty-four cycles were treated with the conventional GnRH antagonist protocol, and 34 cycles with an early GnRH antagonist start protocol. The second cohort (Cohort II) that underwent IVF between June 2012 and February 2013 included a total of 150 embryo-transfer (ET) cycles. Forty-three cycles were treated with the conventional GnRH antagonist protocol, 34 cycles with the modified early GnRH antagonist start protocol using highly purified human menopause gonadotropin and an addition of GnRH agonist to the luteal phase support, and 73 cycles with the GnRH agonist long protocol. Results: The analysis of Cohort I showed that the number of mature oocytes retrieved was significantly higher in the early GnRH antagonist start cycles than in the conventional antagonist cycles (11.9 vs. 8.2, p=0.04). The analysis of Cohort II revealed higher but non-significant CPR/ET in the modified early GnRH antagonist start cycles (41.2%) than in the conventional antagonist cycles (30.2%), which was comparable to that of the GnRH agonist long protocol cycles (39.7%). Conclusion: The modified early antagonist start protocol may improve the mature oocyte yield, possibly via enhanced follicular synchronization, while resulting in superior CPR as compared to the conventional antagonist protocol, which needs to be studied further in prospective randomized controlled trials.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.67-74
• /
• 2013

In this study, a remote controller was designed using localization technique. The designed remote controller system consists of infrared transmit/receive module for time synchronization, ultrasonic transmit/receive module for measuring the TOA value, and micro-controller for processing the measured data value. For the position estimation method of remote controller, the Savarese method was used which does not have a problem of diverging solution depending on initial value. The noise included in the measured value was removed by separating the signal and noise with the use of EMD method which is the non-stationary signal analysis technique. The designed system was tested by constructing a simulation environment, and the improvement of accuracy and precision for the application of EMD method was examined.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.557-561
• /
• 2007

Along with the significance of information systems in today s global business operation, the significance of information systems control and audit is ever increasing in the effort to secure accuracy and integrity of vital business data. A study is undertaken to integrate Food and Drug Administration computerized systems validation regulations. Securities & Exchange Commission Sarbanes-Oxley Act of 200 and other significant regulations, and lastly, People Capability Maturity Model into one comprehensive information system validation model. The initial benefits to this comprehensive model are convenience, time-saving, and synchronization of the regulations. An organization that is striving for a high level of quality system in its essential operating areas of organization may opt for this model. After the complete development of the model, a field test would be scheduled to test its efficacy and validity.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.841-845
• /
• 1991

There are Carrier Current Communication or Power line Carrier (PLC) Communication conducted data exchange using power line Which is installed existing indoor. Power line is possible to construct data link economically, on the other hand, have an inferior transmission environment such as irregular noise and severe level variation. The purpose of this paper is to present transmission possibility for PLC using spread spectrum technique. In the initial synchronization, established computer simulation for the S/N in relation to PN code generator. By using this result, construct the prototype SS system and then experiment the transmission characteristics.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.155-161
• /
• 2009

We focus on discrete event systems with a structure of parallel processing, synchronization, and no-concurrency. We use max-plus algebra, which is an effective approach for controller design for this type of system, for modeling and formulation. Since a typical feature of this type of system is that the initial schedule is frequently changed due to unpredictable disturbances, we use a simple model and numerical examples to examine the possibility of applying the concepts of the feeding buffer and the project buffer of critical chain project management (CCPM) on max-plus linear discrete event systems in order to control the occurrence of an undesirable state change. The application of a CCPM-based framework on a max-plus linear discrete event system was proven to be effective.