• Journal of Astronomy and Space Sciences
• /
• 제36권3호
• /
• pp.187-197
• /
• 2019

The Optical Wide-field patroL-Network (OWL-Net) is a Korean optical space surveillance system used to track and monitor objects in space. In this study, the characteristics of four Initial Orbit Determination (IOD) methods were analyzed using artificial observational data from Low Earth Orbit satellites, and an appropriate IOD method was selected for use as the initial value of Precise Orbit Determination using OWL-Net data. Various simulations were performed according to the properties of observational data, such as noise level and observational time interval, to confirm the characteristics of the IOD methods. The IOD results produced via the OWL-Net observational data were then compared with Two Line Elements data to verify the accuracy of each IOD method. This paper, thus, suggests the best method for IOD, according to the properties of angles-only data, for use even when the ephemeris of a satellite is unknown.

• Journal of Astronomy and Space Sciences
• /
• 제36권4호
• /
• pp.249-264
• /
• 2019

In this study, the precise orbit determination (POD) software is developed for optical observation. To improve the performance of the estimation algorithm, a nonlinear batch filter, based on the unscented transform (UT) that overcomes the disadvantages of the least-squares (LS) batch filter, is utilized. The LS and UT batch filter algorithms are verified through numerical simulation analysis using artificial optical measurements. We use the real optical observation data of a low Earth orbit (LEO) satellite, Cryosat-2, observed from optical wide-field patrol network (OWL-Net), to verify the performance of the POD software developed. The effects of light travel time, annual aberration, and diurnal aberration are considered as error models to correct OWL-Net data. As a result of POD, measurement residual and estimated state vector of the LS batch filter converge to the local minimum when the initial orbit error is large or the initial covariance matrix is smaller than the initial error level. However, UT batch filter converges to the global minimum, irrespective of the initial orbit error and the initial covariance matrix.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.337-343
• /
• 2010

Optical observation system provides angle-only measurement for orbit determination of space object. Range measurement can be directly acquired using laser ranging or tone ranging system. Initial orbit determination (IOD) by using angle- only data set shows discrepancy according to the measurement time interval. To solve this problem, range measurement data should be added for IOD. In this study, two-site optical observation was used to derive the range information. We have observed nine geostationary earth orbit satellites by using two-site optical observation system. The determination result of the range shows the accuracy over 99.5% compared to the results from the satellite tool kit simulation. And we confirmed that the orbit determination by the Herrick-Gibbs method with the range information obtained from the two-site observation is more accurate than the orbit determination by Gauss method with the one-site observation. For more accurate two-site optical observation, a baseline should satisfy an optimal condition of length and more precise observation system needed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.29-32
• /
• 1999

Korea Multi-Purpose SATellite(KOMPSAT) is scheduled to be launched by TAURUS launch vehicle in November, 1999. Tracking, Telemetry and Command(TT&C) operation and the flight dynamics support should be performed for the successful Launch and Early Orbit Phase(LEOP) operation. After the first contact of the KOMPSAT spacecraft, initial orbit determination using ground based tracking data should be performed for the acquisition of the orbit. Although the KOMPSAT is planned to be directly inserted into the Sun- synchronous orbit of 685 km altitude, the orbit maneuvers are required fur the correction of the launch vehicle dispersion. Flight dynamics support such as orbit determination and maneuver planning will be performed by using KOMPSAT Mission Analysis and Planning Subsystem(MAPS) in KOMPSAT Mission Control Element(MCE). The KOMPSAT MAPS have been jointly developed by Electronics and Telecommunications Research Institute(ETRI) and Hyundai Space & Aircraft Company(HYSA). The KOMPSAT MCE was installed in Korea Aerospace Research Institute(KARI) site for the KOMPSAT operation. In this paper, the orbit determination and maneuver planning are introduced and simulated for the KOMPSAT spacecraft in LEOP operation. Initial orbit determination using short arc tracking data and definitive orbit determination using multiple passes tracking data are performed. Orbit maneuvers for the altitude correction and inclination correction are planned for achieving the final mission orbit of the KOMPSAT.

• International Journal of Aerospace System Engineering
• /
• 제7권2호
• /
• pp.6-12
• /
• 2020

The precise prediction of future position of satellite depends on the accurate determination of orbit, which is also helpful in performing orbit maneuvers and trajectory correction maneuvers. For estimating the orbit of satellite many methods are being used. Some of the conventional methods are based on (i) Differential Correction (DC) (ii) Extended Kalman Filter (EKF). In this paper, Differential Evolution (DE) is used to determine the orbit. Orbit Determination using DC and EKF requires some initial guess of the state vector to initiate the algorithm, whereas DE does not require an initial guess since a wide range of bounds for the design unknown variables (orbital elements) is sufficient. This technique is uniformly valid for all orbits viz. circular, elliptic or hyperbolic. Simulated observations have been used to demonstrate the performance of the method. The observations are generated by including random noise. The simulation model that generates the observations includes the perturbation due to non-spherical earth up to second zonal harmonic term.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.87-93
• /
• 2002

일반적으로 궤도재배치는 주어진 시간동안 현재 경도에서 목표 경도로 옮기는 작업이며, 궤도재배치 기동은 표류제도 기동과 목표제도 기동으로 나누어진다. 정지궤도 위성은 지구비대칭에 의한 중력장 때문에 동서방향의 표류에 끊임없이 영향을 받는다. 따라서 기동을 계획할 때, 이러한 영향을 고려하지 않는다면 위성은 성공적으로 궤도재배치 되지 않을 수 있다. 본 연구에서는 기동시각과 delta-V를 구하기 위해서 선형화된 궤도전이 방정식을 사용하여 구하였으며, 궤도재배치를 수행할 경우 위성들간의 접근여부를 확인하기 위하여 비선형 시뮬레이션을 수행하였다.

• Journal of Astronomy and Space Sciences
• /
• 제21권3호
• /
• pp.221-232
• /
• 2004

TLE로부터 SGP4/SDP4 모델을 이용하여 인공위성의 가상의 위치 정보를 얻은 후 Gauss 방법을 사용하여 인공위성의 예비궤도를 결정해보았다. 예비궤도 결정에 필요한 임의의 세 점 사이의 시간간격을 변화시켜 얻은 결과를 위성의 위치 참값과 비교하여 최소의 차이를 가지는 관측 시간 간격을 찾아보았으며, Gauss 예비궤도 결정법의 성능을 비교, 분석하였다. 실제 인공위성 관측 결과와의 비교를 위해서 한국천문연구원의 광시야 망원경을 사용하여 GPS위성(PRN 26)과 무궁화 2호의 광학관측 데이터를 얻은 후 같은 방법으로 예비궤도를 결정해 보았다. 인공위성의 정밀궤도결정을 위하여 시뮬레이션에서 얻어진 가상의 광학관측 데이터를 가지고 정밀케도결정을 수행하였으며, 관측 데이터의 오차와 관측 시간 간격에 따라 정밀궤도결정을 수행하여 원하는 정밀도를 얻기 위한 관측 시스템의 조건에 대해서 알아보았다.

• Journal of Astronomy and Space Sciences
• /
• 제16권2호
• /
• pp.167-176
• /
• 1999

The optimal initial inclination for minimizing the variation of the Local Time of Ascending Node(LTAN) during the three year mission of the KOMPSAT is investigated. At first, the analytical equation for the inclination change by the Sun is derived and the optimal initial inclination by analytical method is derived. Then the analytically derived optimal inclination is checked by the numerical orbit propagation with including all major perturbations. Four different cases of the initial orbital elements are used for monitoring the LTAN variation of the LTAN. Therefore, a new optimal initial inclination by numerical orbit propagation for the KOMPSAT is found. In addition, the variations of the mean and osculating semi-major axis are investigated with the different atmospheric density values. The mean eccentricity vs. argument of perigee diagram for the frozen orbit is obtained.

• Journal of Astronomy and Space Sciences
• /
• 제28권3호
• /
• pp.193-201
• /
• 2011

A strategy for geostationary orbit (or geostationary earth orbit [GEO]) surveillance based on optical angular observations is presented in this study. For the dynamic model, precise analytical orbit model developed by Lee et al. (1997) is used to improve computation performance and the unscented Kalman filer (UKF) is applied as a real-time filtering method. The UKF is known to perform well under highly nonlinear conditions such as surveillance in this study. The strategy that combines the analytical orbit propagation model and the UKF is tested for various conditions like different level of initial error and different level of measurement noise. The dependencies on observation interval and number of ground station are also tested. The test results shows that the GEO orbit determination based on the UKF and the analytical orbit model can be applied to GEO orbit tracking and surveillance effectively.

• Journal of Astronomy and Space Sciences
• /
• 제22권3호
• /
• pp.243-248
• /
• 2005

NORAD Two Line Element (TLE) is very useful to simplify the ground station antenna pointing and mission operations. When a satellite operations facility has the capability to determine NORAD type TLE which is independent of NORAD, it is important to analyze the applicable tracking data arcs for obtaining the best possible orbit. The applicable tracking data arcs for NORAD independent TLE orbit determination of the KOMPSAT-1 using GPS navigation solutions was analyzed for the best possible orbit determination and propagation results. Data spans of the GPS navigation solutions from 1 day to 5 days were used for TLE orbit determination and the results were used as Initial orbit for SGP4 orbit propagation. The operational orbit determination results using KOMPSAT-1 Mission Analysis and Planning System(MAPS) were used as references for the comparisons. The best-matched orbit determination was obtained when 3 days of GPS navigation solutions were used. The resulting 4 days of orbit propagation results were within 2 km of the KOMPSAI-1 MAPS results.