• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.475-478
• /
• 2000

For an integrated nitrification-denitrification process, nitrite formation in the aerobic stage leads to big savings. Dissolved oxygen concentration, temperature, pH and free ammonia concentration have been meet for nitrite accumulation. Also their effects over the ammonia oxidizers and nitrite oxidizers have been studied. Dissolved oxygen limitation and free ammonia inhibition led to slow nitrification and nitrite build up. In this study batch kinetics of ammonium and nitrite oxidations were performed with free ammonia accumulated nitrifiers. From the results it is likely the nitrite oxidizers are inhibited by oxygen limitation rather than free ammonia.

• 한국지능시스템학회논문지
• /
• 제3권3호
• /
• pp.3-18
• /
• 1993

본 논문에서는 박테리아에서 생성되는 생체 계면활성제인 emulsan의 생산을 위한 유가식 배양에서 에칸을 농도의 제어에 퍼지기법을 적용하였다. 기절저해가 있는 유가식 배양에서 emulsan의 생산을 향상시키기 위해 최대 비성장속도를 갖는 최적 기질농도가 유지되도록 기질인 에탄올의 공급 속도가 조절되어 졌다. 생물반응기에서 Acunetobacter calcoaceticus RAG-1 박테리아를 회분식과 유가식으로 배양 실험하여 최적 에탄올 농도를 구하고, kinetic 모델을 제시하였다. 배양실험의 결과와 지식을 바탕으로 퍼지 규칙을 구성하였다. 퍼지 제어기에서 제어 입력변수는 기질농도의 최적치와 운전치의 오차와 오차의 변화로서 구성되고, 제어 출력변수는 기질 공급 속도의 변화량으로 구성되었다. 멤버쉽 함수를 입력변수의 퍼지 집합화 과정을 통하여 구하였고, 최소-최대법과 무게 중심법을 이용하여 출력 제어값을 구하였다. 유가식 배양의 전산모사와 실험 결과에서 퍼지제어 기법은 최적 기질 농도를 정확히 제어하였으며, emulsan 생산은 향상되었다.

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.665-674
• /
• 2000

A major source of the hazardous waste generated is from chemical industries producing plastics, herbicides, pesticides and chlorinated solvents. All of these processes produce a class if hazardous waste termed the chlorinated hydrocarbons(CHCs), either directly or from undesirable side reactions. In this study, we investigated the destruction characteristics of hazardous waste through incineration. A nonequilibrium combustion model was used to describe the effect of the chemical kinetics due to the flame inhibition characteristics of $CCl_4$ which was used as the surrogate of hazardous waste. A parametric screening studies was made in a dump incinerator proposed in this study. The dump incinerator showed high $CCl_4$ DRE(Destruction and Removal Efficiency) as 5 nines. $CCl_4$/CH$_4$ ratio appeared to be most important in the destruction of $CCl_4$ through incineration.

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.990-994
• /
• 2002

Hydroxybenzothiophenes, dihydroxy-benzothiophenes, and benzothiophenedione were identified as inter-mediates of benzothiophene (BT) exposed to ultrasonic irradiation. It is proposed that benzothiophene is oxidized by OH radical to sequentially for m hydroxybenzothiophenes, dihydroxybenzothiophenes, and benzothiophenedione. Benzothiophene is decomposed rapidly following pseudo-first-order kinetics in a first-order manner by ultrasonic irradiation in aqueous solution. The toxicity of sonochemically treated solutions was checked by E. coli and a less inhibition in bacterial respiration was observed from the 120-min treated benzothiophene sample than from the untreated benzothiophene sample. Also evolution of carbon dioxide and sulfite was observed during ultrasonic reaction. A pathway for ultrasonic decomposition of benzothiophene in aqueous solution is proposed.

• Journal of Microbiology and Biotechnology
• /
• 제11권1호
• /
• pp.35-39
• /
• 2001

A simple method for studying the lectin-like interactions between Helicobacter pylori and cultured human epithelial cell lines was developed using an enzyme-linked, biotin-streptavidin bacterial-adhesion assay. The present study suggests that this method is suitable for evaluating the participation of lectin interactions in the adhesion of H. pylori to cultured HeLa S3 and Kato III cells, both fixed and glycosidase-treated cells, as well as assessing glycoconjugated binding inhibition studies. The time-course and dose-dependent kinetics of the biotin-labeled H. pylori adhesion th the formaldehyde-fixed Hela S3 and Kato III cell lines exhibited saturation. In addition, the binding of the biotin-labeled H. pylori to the formaldehyde-fixed cultured cells was partially blocked by pre-incubation with glycoconjugates and polyclonal antibodies against a heparan sulfate binding protein from H. pylori.

• KSBB Journal
• /
• 제6권4호
• /
• pp.363-368
• /
• 1991

PVA degrading bacteria were isolated from water system, and identified as Pseudomonas cepacia and Pseudmonas pseudomallei, which were named as Pseudomonas sp. G5Y and Pseudomonas sp. PW. It was found out that those two kinds of bacteria have a symbiotic relationship to degrade PVA. For the mixed culture of these bacteria, the optimal conditions of pH, temperature, nitrogen source, and polymerization degree of PVA were found to be 7.5, $35^{\circ}C$, ammonium sulfate, and 500, respectively. Also, the growth of these bacteria was promoted by trace elements such as vitamin B1, B12, pyridoxine, and p-aminobenzoate, respectively. The specific growth rate of mixed bacteria was inhibited when the concentration of PVA was more than 20g/l. The substrate inhibition kinetics of the mixed culture was $${\mu}=\frac{0.065S}{2.56+S+(S^2/156}hr^{-1}$

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1069-1074
• /
• 2002

The growth and heavy metal experiments revealed oppositive interactions between toxic metals(Zn and Cd) and Mn when the coastal diatom T. pseudonana were used. Cd and Zn inhibited the algal growth rate only at low Mn ion concentrations and this effect could be accounted for an inhibition of cellular Mn take by the toxic metals. Mn and Zn inhibited cellular Cd take and this indicated a reciprocal effects among the metals with respect to metal take. Saturation kinetics modeling of the take data was consistent with two metals competing with each other for binding to the Mn take system and with both Cd and Mn being transported into the cell by that system. Mathematical modeling of Mn and Cd take data revealed evidence fur a Cd efflux system.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.62-63
• /
• 2006

Both densification and grain growth are driven by the reduction of the interfacial area, kinetics of which depends strongly on the interface structure. Abnormal grain coarsening in the system of singular solid/liquid interface such as WC-Co alloys was explained by the growth mechanism of 2-dimensional nucleation. Based on this concept, the marked inhibition of coarsening of WC grains by VC addition can be approached by the increase in the step free energy, which increases the barrier of 2-dimensional nucleation. The activated sintering in tungsten powders can be approached by the interface structure change induced by the addition of a small amount of nickel.

• 유기물자원화
• /
• 제21권1호
• /
• pp.62-68
• /
• 2013

회분식 실험을 통해 매몰지 내 유기물의 농도가 분해 속도에 미치는 영향을 평가하였다. 기질은 돈 및 우육을 이용하였으며 기질의 농도는 2, 4, 6, 8 및 10 g VS/L로 선정하였다. 기질의 농도가 2 g VS/L 일 경우에 돈 및 우육의 메탄 발생율 각각 46.3 및 48.4 ml CH4/g VS.d 로 가장 높게 나타났으며 기질의 농도가 증가할수록 메탄 발생율은 감소하였다. 비선형 저해 방정식을 이용하여 평가된 저해 상수 값은 돈육의 경우, n 및 m은 각각 4.9 및 0.6으로 나타났으며 우육은 각각 1.1 및 0.4로 나타났다(n: 최대 메탄 발생율 저해 상수, m: 최종 메탄 수율 저해 상수). 기질의 농도가 증가할수록 메탄 발생율은 민감하게 반응하였으나 최종 메탄 수율은 상대적으로 둔감하게 반응하였다. 또한, 돈 및 우육의 n과 m 값 관계를 통해 기질 농도에 따른 저해 특성은 반경쟁적 저해 특성으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.110-122
• /
• 2012

This study investigated the effects of layered clay on the thermal curing behavior and tensile properties of resole phenol-formaldehyde (PF) resin/clay/cellulose nanocomposites. The thermal curing behavior of the nanocomposite was characterized using conventional differential scanning calorimetry (DSC) and temperature modulated (TMDSC). The addition of clay was found to accelerate resin curing, as measured by peak temperature ($T_p$) and heat of reaction (${\Delta}H$) of the nanocomposite’ curing reaction increasing clay addition decreased $T_p$ with a minimum at 3~5% clay. However, the reversing heat flow and heat capacity showed that the clay addition up to 3% delayed the vitrification process of the resole PF resin in the nanocomposite, indicating an inhibition effect of the clay on curing in the later stages of the reaction. Three different methods were employed to determineactivation energies for the curing reaction of the nanocomposite. Both the Ozawa and Kissinger methods showed the lowest activation energy (E) at 3% clay content. Using the isoconversional method, the activation energy ($E_{\alpha}$) as a function of the degree of conversion was measured and showed that as the degree of cure increased, the $E_{\alpha}$ showed a gradual decrease, and gave the lowest value at 3% nanoclay. The addition of clay improved the tensile strengths of the nanocomposites, although a slight decrease in the elongation at break was observed as the clay content increased. These results demonstrated that the addition of clay to resole PF resins accelerate the curing behavior of the nanocomposites with an optimum level of 3% clay based on the balance between the cure kinetics and tensile properties.