• The Korean Journal of Pain
• /
• 제5권1호
• /
• pp.69-75
• /
• 1992

The author experienced of four patients with intractable pain who were treated by continuous intraventricular infusion of morphine through an implanted port system. One suffered from tongue cancer and the others from bone metastasis or distant metatasis of abdominal cancer which were ineffectively to managed through an epidural route. Our experience is that this is a safe and effective method of pain management in patients with head and neck cancer. It is useful as well in patients who have intractable pain that cannot be managed through an intrathecal or epidural route.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4756-4762
• /
• 2014

운전 중에 손상된 풍력발전기 블레이드는 전통적으로 에폭시 수지를 사용하는 수적층 공법으로 수리가 되어 왔다. 수적층 공법의 접착 강도는 높지 않으며 에폭시 수지는 낮은 온도에서 경화특성이 좋지 않은 단점을 가지고 있다. 본 논문에서는 손상된 블레이드 수리를 위하여 폴리에스터 수지를 사용하는 진공성형 공법을 제안한다. 진공성형 공법은 수지를 균일하게 분포시키는 장점이 있으며, 폴리에스터 수지는 저온에서 에폭시보다 경화가 더 잘되는 특성을 가지고 있다. 상온에서 수리가 이루어 질 때, 제안한 방법을 사용할 경우 전통적인 방법에 비하여 평균 접착강도가 최대 77.7% 상향되었다. 섭씨 15도와 5도에서 제안한 방법을 사용하여 수리가 이루어 질 때, 동일한 온도에서 전통적인 방법으로 수리한 경우보다 평균 접착강도가 향상되었다. 전통적인 방법을 사용하여 수리가 불가능한 저온에서도, 본 논문에서 제안한 방법을 사용할 경우 수리가 가능하게 되었고 상온에서 전통적인 방법으로 수리가 된 경우보다 더 좋은 접착강도를 얻을 수 있게 되었다.

• The Korean Journal of Pain
• /
• 제9권2호
• /
• pp.374-379
• /
• 1996

Background: Recently, improvements in drug administration technology have intensified interest in the treatment of postoperative pain. this has resulted in increased use of continuous intravenous infusion of opioid and epidural opioid as alternative to traditional intramuscular administration of opioid. The goal of this study, therefore, was to document the effects of pain control and side effects following continuous intravenous infusion of morphine or meperidine and intramuscular meperidine following cesarean section. Methods: The vital signs, pain score, oxygen saturation and side effects were compared in 150 patients receiving continuous intravenous infusion of morphine, 30 ${\mu}g/kg/hr$ (n=50, group 1); continuous intravenous infusion of meperidine, 150 ${\mu}g/kg/hr$ (n=50, group 2); or intramuscular meperidine, 50mg/every 6hrs (n=50, group 3). Results: VAS (Visual Analogue Scale) was significantly decreased after 30 minutes of administration in all three groups and was significantly lower at 1 hour, but higher at 6 hours in group 3 than two other groups. Severe desaturation episode, defined as $SpO_2$<90%, occurred in the group 3(0.2%). Moderate desaturation episodes, defined as $SpO_2$ 91~95%, occurred more in group 3 than in group 1 and 2 (17.4% vs. 10.4%, 8.2%). The incidence of side effects were similar among three groups. Conclusion: The continuous infusion of opioid was more effective and safe method of postoperative pain control than traditional intramuscular injection.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.205-213
• /
• 2021

Water infusion has long been taken as an effective way to eliminate coal burst risk as coal properties can be loosen and soften by water infusion. However, not all industrial trials of water infusion for coal burst prevention have been necessarily effective in all situations as the effectiveness of this method can be affected by water infusion time, coal properties and the parameters of water injection. Hence, some fundamental issues including the effects of water infusion time on burst propensity and energy evolution need to be further discussed. In this paper, four groups of coal specimens with 0 day, 5 days, 10 days, and 15 days water saturation time are tested under uniaxial compression load with the application of AE monitoring. To comprehensively compare the burst behavior of coal specimens under different water saturation time, stress-strain curves, AE counts, fragmentation characteristics and burst propensity of these groups are analyzed. It was found by this research that sufficient water saturation can mitigate the burst behavior of coal samples while insufficient water infusion might cannot reach the burst mitigation aims.

• 약학회지
• /
• 제30권3호
• /
• pp.149-156
• /
• 1986

Many experiments have showed that the sodium and potassium ion transporting system and the Na, $^+K^+$-ATPase activity of membrane fragments are inhibited by digitalis glycosides and that the pump may be associated with the pharmacological receptor for the drugs. The aim of our investigation is to elucidate the ouabain binding sites occupation in heart following infusion of ouabain to intact animals by the $^3H$-ouabain binding assay. Lethal dose and 26 percent of lethal dose of ouabain were infused to intact rabbit through ear vein. Microsomal fraction was fractionated from ouabain treated rabbit heart. $^3H$-ouabain binding to these fraction in vitro was studied by the Schwartz's method. $^3H$-ouabain binding to heart microsomal fraction was also studied following infusion of ginseng ethanol extract and caffeine to rabbits respectively. 1) The infusion of lethal dose ouabain (113$\mu\textrm{g}$/kg) inhibited the specific $^3H$-ouabain binding to rabbit heart microsomal fraction to the level of 60% (p<0.01) of control group and the infusion of 26% of lethal dose of ouabain led to the level of 79% (p<0.01) of the control group. 2) Time course of binding of 0.4$\mu{M}$ $^3H$-ouabain to microsomal fraction from rabbit heart following infusion of lethal and 26% of lethal dose of ouabain showed dose dependence at various incubation time. 3) Compared with control, only slight change of $K_d$ and $B_{max}$ was detected in in vitro $^3H$-ouabain binding after infusion of ginseng ethanol extract (300mg/kg) to rabbit. 4) In caffeine infusion group, $^3H$-ouabain binding yielded nearly the same results as control group.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.443-449
• /
• 2022

In this study, in order to improve the disadvantages of the environmental error of the infusion set that performs infusion therapy in the existing clinical practice and to maximize the user's convenience by miniaturizing the existing infusion pump system, the structure of the muscle pump of the human vein was imitated. As a double check valve method, a method for preventing the backflow of fluid and discharging a constant fluid in one direction by external pressure was proposed. The proposed bio-mimic muscle pump uses a check valve that controls the flow of fluid in one direction and a silicone tube with elasticity, and a chamber is constructed. A peristaltic pump for applying intermittent pressure to the tube chamber was constructed using a multi-cam structure roller. In order to verify the performance of the proposed pump, optimization was performed while changing the number of multi-cam rollers and adjusting the speed of the roller driving motor, and the reproducibility of the instantaneous discharge amount and the continuous discharge amount of the pump was compared and tested. The performance of the muscle pump proposed in this study was verified through experiments that it can inject up to 1L of fluid within 12 hours, and that it is possible to inject the fluid with an accuracy of ±0.1ml. Real-time monitoring of the fluid injection volume through the bio-mimic muscle pump proposed in this study not only increases the convenience of the administrator, but also provides a precise fluid administration environment to more patients at a low cost, and additionally applies bubble detection and occlusion detection technology If so, it is believed that a safer medical environment can be provided to patients.

• The Korean Journal of Pain
• /
• 제8권2호
• /
• pp.386-389
• /
• 1995

Combined infusion of local anesthetics and opioids has been a common method for providing postoperative analgesia. Complications that can occur with this method include pruritus, nausea and vomiting, urinary retention, hypotension, and both early and late respiratory depression. Late respiratory depression is a rare but feared complication to epidural opioid therapy. We experienced a case of respiratory arrest during epidural infusion of bupivacaine and morphine.

• 대한치과마취과학회지
• /
• 제2권2호
• /
• pp.97-100
• /
• 2002

Background: Patient-controlled sedation (PCS) has been blown for a safe and effective sedative method on the same pharmacological concepts of patient-controlled analgesia. Many different kinds of infusion devices have been used but they often have too long nominal infusion rate and lockout time. $Perfuser^{\circledR}$ fm (B. Braun, Germany) is a new PCA device with 999.9 ml/hr nominal infusion rate and minimum 1 min lockout time. In this study, the feasibility of propofol PCS using $Perfuser^{\circledR}$ fm was examined in order to provide a safe satisfactory sedation for dental patients. Methods: Eleven healthy patients presenting for oral surgery were studied. Propofol PCS was performed using $Perfuser^{\circledR}$ fm, which was set to deliver a bolus dose of 5 mg with 999.9 ml/hr nominal infusion rate and 1 min lockout time. Propofol loading dose was randomly assigned to a bolus dose ${\times}$ 0, 2, and 3 (initial bolus). Patients were told to press the bolus button as often as they needed to relieve discomfort. Results: Total infused dose of propofol was mean 1.8 mg/kg/hr and D (Delivery)/A (Attempt) ratio was mean 72.8%. All patients was awake and there were no clinically significant intraoperative side effects during the sedation. Almost all patients were very satisfied with this type of PCS. Conclusion: Propofol PCS using $Perfuser^{\circledR}$ fm infusion pump provided good conscious sedation for dental procedures.

• Clinical and Experimental Reproductive Medicine
• /
• 제28권4호
• /
• pp.287-293
• /
• 2001

Objective : To investigate the efficacy of high infusion frequency of liquid nitrogen on pregnancy in human embryo after freezing and thawing. Materials and Methods: 150 infertile patients underwent 162 consecutive thawing-ET cycles. In the high infusion frequency group (Group A), 47 patients (50 cycles) underwent cryopreservation with high infusion frequency of liquid nitrogen. In the low infusion frequency group (Group B), 103 patients (112 cycles) underwent cryopreservation with low infusion frequency of liquid nitrogen. We analyzed the clinical characteristics, fertilization rates, development of embryo, good quality embryo ratio, implantation rates, and pregnancy rates between these two groups. Results: There was no difference between the groups with regard to clinical characteristics (mean age, infertility duration, infertility factors, hormone profile), mean number of oocyte retrieval, fertilization rates, and mean embryo number of transfers. The survival rates in group A was 64.9% (228 of 350 embryos), and among the 228 embryos 190 embryos (83.3%) which progressed to the two- to eight-cell stage. After thawing, the embryo numbers were 65 (34.2%), 29 (15.3%), 35 (18.4%), and 37 (19.5%) of grades 1, 2, 3, and above 4, respectively. The survival rates in group B was 63.8% (482 of 755 embryos), and among the 482 embryos 465 embryos (96.5%) which progressed to the two- to eight-cell stage. After thawing, the embryo numbers were 106 (22.8%), 94 (20.2%), 89 (19.1%), and 112 (24.1%) of grades 1, 2, 3, and above 4, respectively. There was no difference in embryo quality change after the freezing-thawing procedure between the groups. Implantation rates (31.1% vs. 34.3%) were not significant. However hCG positive rates in group A (40%) were higher than group B, but not statistically significant. Clinical pregnancy rate (26% vs. 25.9%), on going pregnancy rates (>20 weeks) were not significant (26% vs. 25%). Conclusion: We compared embryo quality change, survival rates, and pregnancy rates between high infusion frequency group and low infusion frequency group and the results were similar between the two groups. Therefore, high infusion frequency of liquid nitrogen for cryopreservation is a worthy method to preserve in human embryos.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.75-80
• /
• 2010

Fiberglass-Reinforced Plastic (FRP) composites have been used for small fishing boats and leisure boats for many years. These composites have different physical characteristics, depending on the constitution of lay-up and manufacturing method. Recently, new manufacturing methods, such as vacuum infusion, have been used to make the composites lighter and stronger. In this research, the mechanical properties of fiberglass reinforcements with constitution of lay-up, manufacturing method, and two different resins were investigated experimentally. It was found that the mechanical properties of FRP composites increased with increasing thickness, with the use of vacuum infusion method, and with the use of vinyl ester resin. The mechanical properties of diverse FRP composites can be used as a practical guide for selecting appropriate materials for specific applications.