• Composites Research
• /
• v.31 no.6
• /
• pp.392-397
• /
• 2018

In this study, the development purpose is to replace steel Tie Rod of commercial vehicle to the carbon composite by a braiding process. CFRP tie rod was designed to meet the performance requirements of existing products by designing the cross section of the core for braiding weaving and the structural design of the joint between the core and the carbon fiber. The specimens were fabricated by braiding method and applied to structural analysis through test evaluation. The manufacturing process proceeded from braiding to infusion through post-curing process. The test evaluation of the final product was satisfactorily carried out by sequentially performing tensile test, torsion test, compression test and fatigue test. In addition, the weight of CFRP tie rod could be reduced by about 37% compared to existing products.

• Journal of Veterinary Science
• /
• v.23 no.4
• /
• pp.53.1-53.9
• /
• 2022

Background: Problems associated with using inhalational anaesthesia are numerous in veterinary anaesthesia practice. Decreasing the amount of used inhalational anaesthetic agents and minimising of cardiorespiratory disorders are the standard goals of anaesthetists. Objective: This experimental study was carried out to investigate the sparing effect of intravenous tramadol, lidocaine, dexmedetomidine and their combinations on the minimum alveolar concentration (MAC) of sevoflurane in healthy Beagle dogs. Methods: This study was conducted on six beagle dogs. Sevoflurane MAC was determined by the tail clamp method on five separate occasions. The dogs received no treatment (control; CONT), tramadol (TRM: 1.5 mg kg^-1 intravenously followed by 1.3 mg kg^-1 h^-1), lidocaine (LID: 2 mg kg^-1 intravenously followed by 3 mg kg^-1 h^-1), dexmedetomidine (DEX: 2 ㎍ kg^-1 intravenously followed by 2 ㎍ kg^-1 h^-1), and their combination (COMB), respectively. Cardiorespiratory variables were recorded every five minutes and immediately before the application of a noxious stimulus. Results: The COMB treatment had the greatest sevoflurane MAC-sparing effect (67.4 ± 13.9%) compared with the other treatments (5.1 ± 25.3, 12.7 ± 14.3, and 40.3 ± 15.1% for TRM, LID, and DEX treatment, respectively). The cardiopulmonary variables remained within the clinically acceptable range following COMB treatment, although the mean arterial pressure was higher and accompanied by bradycardia. Conclusions: Tramadol-lidocaine-dexmedetomidine co-infusion produced a remarkable sevoflurane MAC-sparing effect in clinically healthy beagle dogs and could result in the alleviation of cardiorespiratory depression caused by sevoflurane. Cardiorespiratory variables should be monitored carefully to avoid undesirable side effects induced by dexmedetomidine.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.397-408
• /
• 2022

Rinse & Chill^® technology (RCT) entails rinsing the vasculature using a chilled isotonic solution (3℃; 98.5% water and a blend of dextrose, maltose, and sodium phosphates) to rinse out the residual blood from the carcass. Infusion of pre-chilled solutions into intact animal carcasses immediately upon exsanguination is advantageous in terms of lowering the internal muscle temperature and accelerating chilling. This technology is primarily used for purposes of effective blood removal, favorable pH decline, and efficient carcass chilling, all of which improve meat quality and safety. Although RCT solution contains some substrates, the pre-rigor muscle is still physiologically active at the time of early postmortem and vascular rinsing. Consequently, these substrates are fully metabolized by the muscle, leaving no detectable residues in meat. The technology has been commercially approved and in continuous use since 2000 in the United States and since 1997 in Australia. As of January 2022, 23 plants have implemented RCT among the 5 countries (Australia, US, Canada, New Zealand, and Japan) that have evaluated and approved RCT. All plants are operating under sound Sanitation Standard Operation Procedures (SSOP) and a sound Hazard Analysis Critical Control Point (HACCP) program. No food safety issues have been reported associated with the use of this technology. RCT has been adapted by the meat industry to improve product safety and meat quality while improving economic performance. Therefore, this review summarizes highlights of how RCT technically works on a variety of animal types (beef, bison, pork, and lamb).

• Journal of Dairy Science and Biotechnology
• /
• v.41 no.3
• /
• pp.103-112
• /
• 2023

This study aimed to assess the effectiveness of 10 different pre-enrichment methods using Real-Time polymerase chain reaction (PCR) in support of the FDA method. When the initial Cronobacter spp. (Enterobacter sakazakii) inoculation was 7.2 CFU/g, the Ct values were observed in the following order: 21.37 (Enterobacteriaceae enrichment [EE] broth), 21.95 (brain heart infusion [BHI]), 22.72 (tryptic soy broth [TSB]), 23.02 (violet red bile lactose [VRBL]), 22.31 (TSB-0.1% sodium pyruvate [SP]), 23.43 (distilled water [DW]), 24.34 (phosphate buffered saline [PBS]), 24.95 (nutrient broth [NB]), 25.82 (TSB-0.6% yeast extract [YE]), and 28.27 (violet red bile glucose [VRBG]). For an inoculation of 1.82% CFU/g of Cronobacter spp. (E. sakazakii), the Ct values were recorded in this sequence: 20.34 (EE broth), 22.16 (TSB-0.6% YE), 22.37 (BHI), 22.71 (VRBL), 22.88 (TSB), 23.01 (DW), 23.19 (NB), 23.79 (TSB-0.1% SP), 24.66 (VRBG), and 24.70 (PBS). Finally, when the inoculum of Cronobacter spp. (E. sakazakii) was 0.182 CFU/g, the Ct values followed this order: 21.93 (VRBL), 23.07 (TSB-0.6% YE), 23.31 (DW), 23.47 (PBS), 23.70 (BHI), 24.14 (TSB-0.1% SP), 25.14 (TSB), 29.00 (VRBG), 31.55 (EE broth), and were undetected in the case of NB. Consequently, these results indicate that there were no significant differences among the 10 different pre-enrichment broths. Future studies should focus on exploring pre-enrichment broths that can improve the limit of detection at very low Cronobacter spp. (E. sakazakii) concentrations and enhance the selective recovery of Cronobacter spp. (E. sakazakii) under acid, antibiotic, cold, and heat damage conditions.

• Journal of fish pathology
• /
• v.37 no.1
• /
• pp.49-60
• /
• 2024

A viable but non-culturable (VBNC) state is a survival strategy adopted by bacteria when faced with unfavorable environmental conditions, rendering them unable to grow on nutrient agar while maintaining low metabolic activity. This study explored the impact of temperature and nutrient availability on inducing VBNC state in Edwardsiella piscicida, the most important bacterial fish pathogen, and assessed its pathogenicity at VBNC state. E. piscicida was suspended in filtered sterile seawater and exposed to three different temperatures (4, 10, and 25℃) to induce the VBNC state. Subsequently, the induced VBNC cells were subjected to resuscitation by either raising the temperature to 28℃ or inoculating them in brain heart infusion broth supplemented with 1% NaCl. A propidium monoazide (PMA)-qPCR method was also developed to selectively quantify live (VBNC or culturable) E. piscicida cells. The results showed that the bacteria entered the VBNC state after approximately 1 month at 4℃ and 25℃, and 2 months at 10℃. The VBNC E. piscicida cells were successfully revived within 3 days in a nutrient-rich environment at 28℃, highlighting the significance of temperature and nutrition in inducing and resuscitating the VBNC state. In pathogenicity tests, resuscitated E. piscicida cells exhibited high pathogenicity in olive flounder comparable to cultured bacteria, while VBNC cells showed no signs of infection, suggesting they are unlikely to resuscitate in fish. In conclusion, this study contributes to our understanding of fish pathogen ecology by investigating the characteristics of the VBNC state under varying temperature and nutrition conditions.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.83-90
• /
• 2023

The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value G_Ic were 1.357 kJ/m2 and 1.397 kJ/m2, respectively, and Mode-II critical strain energy release rate values G_IIc were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.115-127
• /
• 2019

The low-flow grouting injection technique, the target construction method for this study, is a method of pouring mortar into the ground by non-emission replacement principle, which can be expected to increase the density of the ground, and, in some cases, be used as a base file using the strength of the high injection solids, along with low noise, low pollution, and high durability. To verify that the dynamic characteristics of the ground are improved by the low-flow injection technique, the test work was conducted on the site and physical tests were performed, and the quality of the improvement formed in the ground was verified through the indoor test on the core and core recovery rate was analyzed. The density logs test layer calculated the volume density of the ground layer by using the Compton scattering of gamma-rays, and the sonic logs was tested on the ground around the drill hole using a detector consisting of sonar and receiver devices inside the drill hole. As a result of the measurement of the change in physical properties (density and sonic logs) before and after grouting, both properties were basically increased after infusion of grout agent. However, the variation in density increase was greater than the increase in speed after grouting, and the ground density measurement method was thought to be effective in measuring the fill effect of the filler. Strength and core recovery rates were measured from specimens taken after the age of 28 days, and the results of the test results of the diffusion and strength test of the improved products were verified to satisfy the design criteria, thereby satisfying the seismic performance reinforcement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.786-792
• /
• 2013

In this study was explored minimize side effects due to the additional injection of contrast medium and maintaining a high resolution imaging applied to the inspection and analysis of the contrast medium that affect the peak time biomechanics factors. Included 48 patients using the test bolus method, after measuring a patient's biomechanics factors of inspection before and during the test, correlation between contrast medium peak time and learn, matches the regression equation calculated and measured contrast medium peak time was assessed by the Bland Altman plot. Research result, inspections of SBP, HR contrast medium peak time and a significant negative correlation was, step 1, every increase, the contrast medium peak time significantly to -0.018 and -0.159 decreased, a fairly high concordance no difference between the two method. In conclusion, the regression equation using the existing methods, while maintaining excellent image quality that contrast medium is reduced to a patient, it can conclude that the alternative to the existing methods.

• Composites Research
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2019

The RFI process is an OoA process that fiber mats and resin films are laminated and cured in a vacuum bag. In case that resin film is insufficient to fill empty space in fibers, it makes void defect in composites and this void decrease mechanical properties of the composites. For this reason, non-destructive testing is usually used to evaluate void of manufactured composites. So, in this study, a manufacturing method of standard void specimens, which are able to be used as references in non-destructive testing, was proposed by controlling resin film thickness in the RFI process. Also, a fiber compaction test was proposed as a method to set the resin film thicknesses depending on target voids of manufacturing panels. The target void panels of 0%, 2%, and 4% were made by the proposed methods, and signal attenuation depending on void was measured by non-destructive testing and image analysis. In addition, voids of specimens for tensile, in-plane, short beam and compressive tests were estimated by signal attenuation, and mechanical properties were evaluated depending on the voids.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.390-396
• /
• 2009

The aim of this study was to evaluate endodontic irrigation methods with $EndoVac^{(R)}$ and $EndoActivator^{(R)}$ in the elimination of Enterococcus faecalis from the root canals. Extracted 70 human single-rooted teeth were used. The canals were instrumented by a crown-down technique with .04 taper ProFile to ISO size 40. After the teeth were autoclaved, the canals were inoculated with E. faecalis and incubated for 48 h. The teeth were randomly divided into three experimental groups of 20 teeth each according to canal irrigation methods and two control groups as follows: group 1 - $EndoVac^{(R)}$; group 2 - $EndoActivator^{(R)}$; group 3-Conventional needle irrigation method. After canal irrigation using 2.5% NaOCl. first samples (S1) were taken using sterile paper point. And the canals were filled with sterile brain heart infusion (BHI) broth and incubated for 24 h, then second samples (S2) were taken. The samples were cultured on BHI agar plate to determine the numbers of colony forming units (CFU). In first sampling (S1), only one canal of conventional method among the all experimental groups was positive cultured. In second sampling (S2), $EndoVac^{(R)}$ group showed the least positive culture numbers of E. faecalis. There was statistically significant difference between the $EndoVac^{(R)}$ and conventional needle irrigation methods in the mean value of Log CFU. According to the results of this study, $EndoVac^{(R)}$ showed better efficacy than conventional needle irrigation method in the elimination of E. faecalis from the root canal.