• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.409-416
• /
• 2005

Design analysis for underground spaces requires evaluating stability related to tunnel collapses. A failure mode is one of the critical factors in the conventional methods of stability analysis. Therefore identification of failure modes is essential in securing safe construction in the phase of design analysis, instrumentation planning and implementation of reinforcing measures. In this study failure modes at the tunnel heading in granular soils are investigated using physical model tests and numerical simulation for various tunnel depths and ground surface inclinations. Test results indicated that the effect of depth and inclination of ground surface on a failure mode are significant. It is identified that, with an incase in depth, failure modes become localized in a region close to the tunnel. It is also known that an increase in the inclination of ground surface results in inclined and wide failure modes.

• 한국IT서비스학회지
• /
• 제9권2호
• /
• pp.151-161
• /
• 2010

Recently, as the era of ubiquitous has arrived, an infrastructure for the short-distance wireless communication has been extended socially, and thus a variety of services are being proposed. The Multimedia Contents Delivery System using the ZigBee, in particular, has an important stance in enlargement of a variety of services in the aspect of individual-oriented service support though Wireless Personal Area Network (WPAN). Nonetheless, the ZigBee, or the IEEE 802.15.4 Standard, has many restrictions on the Multimedia Contents Delivery System due to the low data transport rate. In order to improve the ZigBee which presents a limit on the transport rate at the IEEE 802.15.4 Standard, this thesis has designed the burst mode which is a method of transmitting a certain amount of data in block units at a high speed without any stoppage until the completion of the transmission. Also, to provide a Multimedia Contents Delivery Service with an application of the normal data transmission mode, it improved the transmission performance of the ZigBee. In addition, for the Multimedia Contents Delivery Service under the ubiquitous environment, it designed and implemented a broadcasting Multimedia Contents Delivery System based on the ZigBee to conduct a comparative analysis on the data transmission performance according to the transmission method.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.531-542
• /
• 2021

The study aims to investigate differences between men and women in influence of various socio-demographic factors on choice of mode of transport. For this purpose, a binary logit model of choice probabilities is implemented on survey data of a developing country city. Results indicate women's choice of travel mode to be more environment-friendly than that of men. Well-educated, working and middle-aged individuals appear to be the most likely to choosing more-polluting modes of transport for frequent travelling purposes. Individuals in the sample who are the least socioeconomically well off are found the most likely to be promising for the environment. The findings of this study suggest the future transportation policies toward development of existing infrastructure of greener modes of transportation in the city such as, public transportation services and pedestrian lanes, so as to manage the rising issues of degrading environmental quality. The study highlights how the consideration and inclusion of socio-demographic factors is crucial for policy recommendation regarding curtailing the environmental damages contributed by transportation sector. Because mobility crucially affects all other indicators of empowerment, and women are the ones using green modes extensively, the city's transportation system should be so developed which gives their safety and security due importance.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.229-238
• /
• 2022

This paper addresses on the International technical trends, standards, and development status of terrestrial radionavigation system to provide more accurate and fail-safe Positioning, Navigation, and Timing (PNT) Information available in maritime navigation environment. We analyze the performance result of pilot service in enhanced Long range navigation (eLoran) testbed environment using Low Frequency (LF) signal, and describe the development status of Ranging-Mode (R-Mode) system using Medium Frequency (MF) and Very High Frequency (VHF) to meet the Harbor Entrances and Approaches (HEA) requirement of International Maritime Organization (IMO) within 10m position accuracy. Furthermore, we present an architecture for integrated service of satellite-terrestrial navigation system and future maritime applicable fields. As the core information infrastructure of future navigation for 4th industrial revolution, this paper will be contributed to determining the direction of present and future to provide fail-safe PNT service with Global Navigation Satellite System (GNSS) based on the technical enhancement of terrestrial integrated navigation system.

• 한국전산구조공학회논문집
• /
• 제28권6호
• /
• pp.659-666
• /
• 2015

본 논문에서는 콘크리트 구조물의 층상박리균열 위에서의 손상탐지에 효율적인 충격반향기법에 대해 영향을 끼치는 다양한 영향요소들에 대한 분석을 수행하였다. 충격반향기법에서의 균열 가시화를 위해 층상박리균열위의 동적거동 및 두께를 나타내는 휨 모드 및 충격반향모드(두께 모드)에 영향을 끼치는 균열의 폭/두께(a/h) 비, 균열위의 상대적 가진 점, 측정 점의 위치 등의 시험설정 변수 등을 매개변수적 유한요소해석을 통하여 조사하였다. a/h비는 2보다 클 경우 휨 모드가 지배적이었으며 작을 경우 두께 모드가 지배적이었다. 또한 가진 점, 측정 점 중 어느 하나만 균열 위에 존재할 때도 휨 모드가 지배적이었으며 균열 밖의 범위의 건전한 영역에는 가진 점, 측정 점이 모두 위치하여야 두께 모드가 지배적이었다.

• 대한교통학회지
• /
• 제30권6호
• /
• pp.81-92
• /
• 2012

현재 예비타당성조사 지침에서는 수단전환이라는 대중교통수단이 가지는 특성을 고려하지 못한 채 도로부문의 영향권 설정기준을 철도사업과 같은 대중교통수단의 투자평가에도 적용하고 있어 문제가 발생하는 바, 본 연구에서는 대중교통수단 투자평가에 적용할 수 있는 영향권 설정지표와 기준을 제시하고자 하였다. 이에 가상의 사업을 설정하여 기존의 방법론과 본 연구 방법론을 적용하여 비교하였다. 분석결과 기존 방법론과 119억의 편익 차이가 발생하는 것으로 나타났으며, 영향권 내 수단전환 통행량의 수렴성은 본 연구 방법론이 수단전환통행량의 93%, 기존 방법론이 76%를 영향권 내에 포함하고 있는 것으로 나타났다. 본 연구를 통해 대중교통수단의 투자평가에 범용적으로 적용할 수 있는 영향권 설정기준을 기존의 방법론과 비교하여 제시하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.661-667
• /
• 2018

Electric vehicles are taken a long time to charge and are restricted driving where charging infrastructure was not sufficiently constructed. The vehicle developed to solve these problems is a plug-in hybrid vehicle. It is possible to drive a certain distance by using electric motor and when the battery runs out, it operate the engine. Plug-in hybrid vehicle have a complicated structure and a lot of parts comparing a general vehicle because the electric parts and the internal combustion engine are installed together. Therefore, as the aging (mileage) of the plug-in hybrid vehicle, the influence which change of fuel consumption is expected to be larger than a general vehicle, but an experimental data are lacking. In this paper, we cumulate a mileage of the plug-in hybrid vehicle about 15,000 km and measured the fuel economy when the cumulated distance reached within 160 km, 6,500 km, 15,000 km respectively, by using domestic public test method. For measuring fuel economy of the vehicle, CD mode (driving distance on a single charge) which use only motor and the CS mode which operate motor and combustion engine were measured respectively. As a result, the fuel economy slightly increased at cumulated mileage of 6,500 km compared to the 160 km and the fuel economy of 15,000 km was similar to 160 km.

• 한국항해항만학회지
• /
• 제45권1호
• /
• pp.26-32
• /
• 2021

해양에서 정보통신기술 기반의 4차 산업혁명 확산은 고정밀 및 안정적인 위치·항법·시각·정보(PNT&D)를 요구하고 있다. 국제해사기구(IMO)와 국제항로표지협회(IALA)에서는 범지구 위성 항법 시스템(GNSS) 의존도가 증가함에 따라 취약성 경감을 위해 백업시스템을 요구하고 있어 우리나라는 R-Mode 기술개발에 관한 연구를 진행하고 있다. 시설의 중복투자를 막기 위해 기존 해상 인프라인 중파를 이용하는 DGPS(Differential Global Positioning System) 보정국과 감시국 34개소 및 초단파를 이용하는 선박자동식별장치(AIS) 기지국을 활용하고자 하며, 일부 서해 지역에서 수신신호의 세기가 미약한 전파 음영지역이 있으므로, 이를 해결하기 위해 R-Mode 보정국과 감시국 신설을 통하여 전파 음영지역을 해소하고자 한다. 따라서 본 논문에서는 주파수가 낮은 대역에서(단파대 이하) 전파가 지표면(수면)을 따라 잘 전송되는 특징이 있어 시뮬레이션과 전파측정을 하였으며, 전파전파 특성 분석을 통하여 R-Mode 보정국과 감시국 신설 후보지를 제안하고자 한다. 본 논문을 활용하여 다른 지역의 전파 음영지역을 해소하기 위해 적절한 위치에 R-Mode 보정국과 감시국 후보지를 선정할 수 있다.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.247-261
• /
• 2017

In the field of dynamic measurement and structural damage identification, it is generally known that modal frequencies may be measured with higher accuracy than mode shapes. However, the number of natural frequencies within a measurable range is limited. Accessing additional forms of modal frequencies is thus desirable. The present study is concerned about the extraction of artificial boundary condition (ABC) frequencies from modal testing. The ABC frequencies correspond to the natural frequencies of the structure with a perturbed boundary condition, but they can be extracted from processing the frequency response functions (FRF) measured in a specific configuration from the structure in its existing state without the need of actually altering the physical support condition. This paper presents a comprehensive experimental investigation into the measurability of the ABC frequencies from physical experiments. It covers the testing procedure through modal testing, the data processing and data analysis requirements, and the FRF matrix operations leading to the extraction of the ABC frequencies. Specific sources of measurement errors and their effects on the accuracy of the extracted ABC frequencies are scrutinised. The extracted ABC frequencies are subsequently applied in the damage identification in beams by means of finite element model updating. Results demonstrate that it is possible to extract the first few ABC frequencies from the modal testing for a variety of artificial boundary conditions incorporating one or two virtual pin supports, and the inclusion of ABC frequencies enables the identification of structural damages without the need to involve the mode shape information.

• 한국수자원학회논문집
• /
• 제31권6호
• /
• pp.757-768
• /
• 1998

6개의 수조와 1개의 펌프장을 갖고 있는 대심도 지하관로 배수시스템에서 발생하는 복잡한 서어징 현상을 강체수주이론에 의한 비선형 상태방정식에 의해서 해석하였다. 상태방정식은 각 수조에서의 유량연속방정식과 비선형항을 갖는 지하관로의 운동 방정식으로부터 구성된다. 홍수의 유입량과 펌프의 유출량을 장방형 펄스(pulse)로 하고 유출유량과 전유입유량이 같다고 한다면 비선형 상태방정식에 의한 각 수조수위의 진동은 선형화 방정식에 의한 결과와 잘 일치 하고 있다. 이것은 관로저항의 영향이 적고 이것을 무시한 자유진동해석이 타당하다는 것을 나타내는 것이다. 자유진동 방정식은 6개의 고유모드를 갖는다. 그 중 하나는 강체모드이며 유출유량이 전유입유량과 다를 때에 나타나며 이러한 6개의 고유모드는 유입유출조건에 의해서 여러 가지 서어징 현상을 구성한다. 강체모드가 존재하기 때문에 실제의 홍수 유입량에 대응한 고도의 펌프운전이 요구된다.