• 제목/요약/키워드: Infrared image processing

검색결과 203건 처리시간 0.024초

FFT를 이용한 화재 열영상의 주파수 스펙트럼 분석 (A Frequency Spectrum Analysis based on FFT of Fire Thermal Image)

  • 김원호;장복규
    • 융합신호처리학회논문지
    • /
    • 제12권1호
    • /
    • pp.33-37
    • /
    • 2011
  • 본 논문은 FFT를 이용한 적외선 화재 열영상의 주파수 스펙트럼 분석에 관한 것으로 영상처리를 통하여 화재 발생 유무를 주파수 영역에서 판별하기 위한 조건을 도출하는 것이 목적이다. 적외선 열영상의 주파수 스펙트럼 분석은 고속 푸리에 변환을 이용하여 수행하였으며, 화재로 추정되는 고명도의 영역을 화재 후보영역으로 결정한 다음, 연속적인 열영상의 해당영역에 대하여 DC 및 AC 주파수 분포를 분석하였다. 분석된 결과를 기반으로 정적인 오검출 요소와 동적특성을 가지는 화재영역을 구분하는 열영상의 화재 판정 기준을 제시하고 컴퓨터 모의실험을 통하여 실용성을 확인하였다.

적외선 영상의 화염 검출을 위한 최적 문턱치 분석 (Analysis on Optimal Threshold Value for Infrared Video Flame Detection)

  • 정수영;김원호
    • 한국위성정보통신학회논문지
    • /
    • 제8권4호
    • /
    • pp.100-104
    • /
    • 2013
  • 본 논문은 열영상 기반의 화염 검출을 위한 기존의 문턱치 설정 기법들을 분석하고 최적 문턱치 설정 방안을 제시한다. 기존의 열영상 기반의 화염검출 알고리즘들은 보통 고정 문턱치를 이용하여 화염 후보영역을 추출하고 후처리를 통해 화염 검출을 최종 판정하므로 화염 후보영역의 결정 과정은 최종 화재 검출 결과에 많은 영향을 준다. 따라서 카메라의 종류나 운영 환경에 따라 입력 영상의 대비와 밝기의 변화가 발생하기 때문에 화염 검출 문턱치는 입력영상의 특성에 연동하여 설정되어져야 한다. 따라서 최적 문턱치 설정 방안을 제시하기 위해 고정 명암도, 평균값, 표준편차 및 최대값을 이용한 문턱치 설정 기법들을 비교 분석하였다. 결론적으로 최적 문턱치는 평균과 표준편차의 합보다 크며 최대값 보다는 작은 값으로 설정 한다면 화염 검출 정확도가 기존 고정 문턱치 방식에 비해 크게 개선될 것으로 기대된다.

Daum 이미지와 QuickBird 위성영상에 의한 NIR 밴드 추출과 정규화식생지수 (NDVI)에의 적용 (NIR Band Extraction for Daum Image and QuickBird Satellite Imagery and its Application in NDVI)

  • 나상일;박종화
    • 한국농공학회논문집
    • /
    • 제51권4호
    • /
    • pp.37-42
    • /
    • 2009
  • This study extracted Near Infrared (NIR) band using Image Processing Technology (IPT), and calculated Normalized Difference Vegetation Index (NDVI). Aerial photography from Daum portal in combination with high resolution satellite image was employed to improve vegetation sensitivity by extracting NIR band and calculating NDVI with comparison to QuickBird result. The extracted NIR band and NDVI through IPT presented similar distribution pattern. In addition, a regression analysis by land cover character showed high correlation paddy and forest Therefore, this approach could be acceptable to acquire vegetation environment information.

Perceptual Fusion of Infrared and Visible Image through Variational Multiscale with Guide Filtering

  • Feng, Xin;Hu, Kaiqun
    • Journal of Information Processing Systems
    • /
    • 제15권6호
    • /
    • pp.1296-1305
    • /
    • 2019
  • To solve the problem of poor noise suppression capability and frequent loss of edge contour and detailed information in current fusion methods, an infrared and visible light image fusion method based on variational multiscale decomposition is proposed. Firstly, the fused images are separately processed through variational multiscale decomposition to obtain texture components and structural components. The method of guided filter is used to carry out the fusion of the texture components of the fused image. In the structural component fusion, a method is proposed to measure the fused weights with phase consistency, sharpness, and brightness comprehensive information. Finally, the texture components of the two images are fused. The structure components are added to obtain the final fused image. The experimental results show that the proposed method displays very good noise robustness, and it also helps realize better fusion quality.

소형 표적 탐지를 위한 파노라믹 적외선 영상 향상 장치 및 경보시스템 구현 (The Realization of Panoramic Infrared Image Enhancement and Warning System for Small Target Detection)

  • 김기홍;김주영;정태연;전병균;이의혁;김덕규
    • 한국멀티미디어학회논문지
    • /
    • 제8권1호
    • /
    • pp.46-55
    • /
    • 2005
  • 본 논문에서는 소형 위협체를 조기에 탐지하여 위치를 알려주는 파노라믹 적외선 영상 경보 장치를 구현하였고, 경보 성능 향상을 위한 적외선 영상 향상 기법을 제안하였다. 구현 장치는 센서 헤드 유닛, 신호 처리 유닛 등으로 구성된다. 센서 헤드 유닛은 1차원 다중 배열 적외선 센서를 정속으로 고속 회전하여 360도의 넓은 시계 영역을 가지는 파노라믹 열영상을 획득한다. 신호 처리 유닛은 파노라믹 영상을 90도의 부영상으로 나누고, 각 부영역의 통계적 특성에 따라 적응적 평탄역값(adaptive plateau value)을 구한다 그리고 적응적 평탄역값으로 히스토그램을 변화시킴으로써 위협체을 두드러지게 하였으며, 실시간 처리를 위하여 DSP와 FPGA를 이용하여 장치를 구현하였다. 구현 시스템에 제안한 영상 향상 기법을 적용한 결과 기존 기법에 비해 오경보율이 낮음과 시각적으로 위협체의 식별이 용이함을 확인하였다.

  • PDF

열화상 이미지에 대한 고온 특징점 추출 알고리즘의 FPGA 구현 (FPGA implementation of high temperature feature points extraction algorithm for thermal image)

  • 고병환;김희석
    • 전기전자학회논문지
    • /
    • 제22권3호
    • /
    • pp.578-584
    • /
    • 2018
  • 이미지 분할은 영상의 해석과 이미지 인식 분야에서 다양한 방법으로 연구되고 있으며, 특정한 목적에 따른 이미지의 특성을 분리하기 위해 사용된다. 본 논문에서는 열화상 이미지의 특징점인 고온을 검출하여 이미지를 분할하는 알고리즘을 제안한다. 또한 연산속도의 향상을 위해 제안하는 알고리즘을 Zynq-7000 Evaluation Board 환경에서 FPGA Hardware Block Design을 진행하였다. 고온 검출 알고리즘은 16ms에서 0.001ms의 속도 향상을 보였으며 전체 블록은 50ms에서 0.322ms로 속도 향상을 보이는 것을 확인하였다. 또한 영상 테스트벤치를 사용하여 소프트웨어와 하드웨어 이미지에 대해 유사한 PSNR 결과를 입증하였다.

U-city 적외선 영상 감시 시스템의 설계 및 구현 (Design and Implementation of U-city Infrared Image Surveillance System)

  • 김원호;장복규
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.561-564
    • /
    • 2009
  • 본 논문은 디지털 미디어 프로세서 기반의 U-city 적외선 영상 감시 시스템의 설계 및 구현에 대하여 기술한다. 영상 감시 시스템의 하드웨어는 디지털 미디어 프로세서와 비디오 인코더, 비디오 디코더 상용 칩을 기반으로 설계하고 구현하였으며, 영상 감시 소프트웨어는 적외선 영상의 온도분포를 분석하고 화재와 같은 재난상황을 감시하는 알고리즘을 구현하였다. 구현된 시제품의 시험 평가 결과, 제시된 요구 기능과 성능을 만족하였으며 구현 시스템의 실용성을 확인하였다.

  • PDF

Retinex 처리에 기반한 적외선 열상 이미지의 화질 개선 (Thermal Infrared Image Enhancement Method Based on Retinex)

  • 이원석;김경희;이상원
    • 전자공학회논문지 IE
    • /
    • 제48권2호
    • /
    • pp.32-39
    • /
    • 2011
  • 비냉각형 적외선 검출기를 사용한 적외선 열상 카메라의 영상은 다이나믹 레인지가 좁고 신호 증폭에 의한 노이즈로 인하여 피사체를 식별하기 어려운 단점이 있다. 인간의 시각모델을 기반으로 한 레티넥스 알고리즘은 콘트라스트 향상 및 컬러 재현성에 있어서 매우 효과적인 방법으로 알려져 있다. 하지만, 적외선 열상 이미지와 같이 다이나믹 레인지가 좁은 영상에 레티넥스 알고리즘을 적용할 경우 오히려 콘트라스트가 감소하고 이미지 품질이 저하된다. 본 논문에서는 적외선 열상 이미지의 특성에 적합한 레티넥스 알고리즘 기반의 화질 개선 방법을 제안한다. 콘트라스트 개선 성능을 향상시키기 위해 새로운 다이나믹 레인지 압축 함수를 사용하였고, 국부적인 윤곽과 노이즈를 개선하기 위해 콘트라스트 보상 처리를 영상의 합성 과정에 적용하였다. 실험 결과 영상의 비교와 분석을 통해 제안한 알고리즘이 기존의 알고리즘보다 적외선 열상 이미지의 화질 개선에 더 효과적인 방법임을 확인하였다.

다중 표적에 대한 적외선 레티클 탐색기의 오차 신호 분석 (Analysis of the error signals for infrared reticle seekers in multiple targets)

  • 한성현;홍현기;최종수
    • 한국통신학회논문지
    • /
    • 제21권6호
    • /
    • pp.1438-1446
    • /
    • 1996
  • Infrared seekers using reticles with a single detector have been widely used due to small size and low cost. However, the analysis of the error signals and the performance in multiple targets are performed either simplistically or not at all. In this paper, we present detector signals and processing results using image and signal processing techniques, especially performance analysis in multiple targets. The simulation results are essential to make the advanced signal processing part of retical seekers which can deal with various engagement scenarios.

  • PDF

Dead Pixel Detection Method by Different Response at Hot & Cold Images for Infrared Camera

  • Ye, Seong-Eun;Kim, Bo-Mee
    • 한국컴퓨터정보학회논문지
    • /
    • 제23권11호
    • /
    • pp.1-7
    • /
    • 2018
  • In this paper, we propose soft dead pixels detection method by analysing different response at hot and cold images. Abnormal pixels are able to effect detecting a small target. It also makes confusing real target or not cause of changing target size. Almost exist abnormal pixels after image signal processing even if dead pixels are removed by dead pixel compensation are called soft dead pixels. They are showed defect in final image. So removing or compensating dead pixels are very important for detecting object. The key idea of this proposed method, detecting dead pixels, is that most of soft deads have different response characteristics between hot image and cold image. General infrared cameras do NUC to remove FPN. Working 2-reference NUC must be needed getting data, hot & cold images. The way which is proposed dead pixel detection is that we compare response, NUC gain, at each pixel about two different temperature images and find out dead pixels if the pixels exceed threshold about average gain of around pixels.