• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.10
• /
• pp.889-894
• /
• 2004

Infrared (IR) detectors are widely used for many applications, such as temperature measurement, intruder and fire detection, robotics and industrial equipment, thermoelstic stress analysis, medical diagnostics, and chemical analysis. Quantum detectors commonly need to be refrigerated below 80 K, and thus a cooling system should be equipped together with the detector system. The cooling load, which should be removed by the cooling system to maintain the nominal operating temperature of the detector, critically depends on the insulation efficiency of the cryochamber housing the detector. Thermal analysis of cryochamber includes the conduction heat transfer through a cold well, the gases conduction and gas outgassing, as well as radiation heat transfer, The transient cooling characteristics of an infrared detector cryochamber are investigated experimentally in the present study. The transient cooling load increases as the gas pressure is increased. Gas pressure becomes significant as the cooling process proceeds. Cool down time is also increased as the gas pressure is increased. It is also found that natural convection effects on cool down time become significant when the gas pressure is increased.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1151-1151
• /
• 2001

The international coffee trade is conducted almost exclusively with green coffee. The main coffee producing countries include Brazil, Columbia, Indonesia, Mexico and the Ivory Coast. About 99 % of the coffee grown throughout the world belong to two coffee plant varieties that are commonly known as Arabica and Robusta. The quality of green coffee can be assessed according to several ISO standards (1,2,3,4,5). However, no official international standards for the authenticity of green coffee have been issued. It is important to know the country of origin of the coffee for the purposes of fair international trade. The geographic origin of the coffee is often stated on the label of coffee products such as speciality roasted and soluble coffees. Near Infrared Spectroscopy (NIR) is an accepted technique for quantitative analysis of various parameters in routine QC analysis of food products. It would appear to be a promising candidate as a tool for identification of green coffee origin and numerous feasibility studies have appeared in the literature on its use for soluble, roasted and green coffee variety identification as well as identification of arabica or robusta coffees. NIR spectrophotometers when configured in the reflectance mode are able to perform a complete profile of the NIR spectrum on whole beans. The data can then be interpreted by discriminant chemometrics data analysis. This is the approach used in the present study.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.178-184
• /
• 1997

The cone calorimeter as defined by ISO 5660, ASTM 1354, and NFPA 264A is used to assess the reaction to fire of almost any material that must be evaluated in the fire science field. Typical combustion gas analyses include oxygen, CO and CO2. Oxygen consumption is used to determine rate of heat release. Analysis of combustion gases other than oxygen, CO and CO2 has been attempted using filters to remove the solid smoke particles before analysis. This method has generated unreliable results due to the adsorption of many gas components on the active carbon . particles deposited on the filters. A technique using fourier Transform Infrared (FTIB) analysis without filtration will be disclosed and a discussion will be presented of the analytical results of toxic gases produced from various flame retarded polymeric materials. Use of such data in lethal toxic potency determinations is also reviewed.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.467-480
• /
• 2004

It is very important to eliminate thermal background radiation for the near infrared camera system such as KAONICS (KAO Near Infrared Camera System). Thermal background radiations which come from window and cryostat wall influence IR detector and decrease IR system performance. Therefore the cold box which contains optics and detector housing must be cooled down to eliminate thermal background radiation. We carried out quantitative analysis to determine internal cooling temperature to reduce thermal noise in the J, H, Ks, and L bandpass. Additionally, we estimated the incoming heat load and then chose the cryocooler adequate to KAONICS's requirements. The cooling time and the final cooling temperature of the cold box were calculated. These results were also implemented to the system design.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.155-161
• /
• 1999

Red pepper powder (Capsicum annum L.) is an important seasoning as a kimchi ingredient in korea and most korean consumer tend to eat the korean red pepper powder as the better than other oriental country such as China. Near infrared reflectance spectroscopy (NIRS) was applied for discrimination according to geographical origin (Korea, China) of red pepper powder. The objective of this study is to determine if NIR technique could be used to discriminate between the korean red pepper powder and non-korean red pepper powder according to seed content and maxing ratio in red pepper powder by using the new method. Rapid, precise and nondestructive analysis method for determination of the geographical origin of red pepper powder by near infrared spectroscopy and chemometrics were performed. It has been observed discriminant analysis with PLS is adequate to determinate the geographical origin of red pepper powder. It tend to difficult the discrimination of geographical origin according to increase the seed content of red pepper powder. The accuracy of discrimination in mixed red pepper powder was range from 95.2% to 100%.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.321-328
• /
• 2012

We have designed a 30 cm cryogenic space infrared telescope for astronomical observation. The telescope is designed to observe in the wavelength range of 0.5~2.1 ${\mu}m$, when it is cooled down to 77 K. The result of the preliminary design of the support structure and support method of the mirror of a 30 cm cryogenic space infrared telescope is shown in this paper. As a Cassegrain prescription, the optical system of a 30 cm cryogenic space infrared telescope has a focal ratio of f/3.1 with a 300 mm primary mirror (M-1) and 113 mm secondary mirror (M-2). The material of the whole structure including mirrors is aluminum alloy (Al6061-T6). Flexures that can withstand random vibration were designed, and it was validated through opto-mechanical analysis that both primary and secondary mirrors, which are assembled in the support structure, meet the requirement of root mean square wavefront error < ${\lambda}/8$ for all gravity direction. Additionally, when the M-1 and flexures are assembled by bolts, the effect of thermal stress occurring from a stainless steel bolt when cooled and bolt torque on the M-1 was analyzed.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.91-96
• /
• 2008

This research studied about the cause analysis of fire that was occurred in far infrared rays heater to base on the fire examples. Fire of electric heater was apt to commit error that handled an over-heating accident by judged molten mark in heat ray. Molten mark which was attached in heat ray was appeared to the form of layer short circuit by other metal material, but other metal material was not found beside the ingredient of heat wire which was mixed to an alloy of Fe-Cr-Al according to result of ingredient distribution by SEM/EDX. Also, the result of overheating experiment by layer short circuit and overvoltage showed higher febrility than normal, but there was no possibility of fire occurrence. This paper will be contributed to science for cause analysis of electric fire through analyzing physical, chemical and flame features of burnout heater on the basis of diagnosis of fire that was happened in infrared rays heater.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1181-1187
• /
• 2009

In this paper, we proposed a method to analyze kind of clouds using a fuzzy reasoning method. In the proposed method, we used the clues that G channel value is dominant from RGB color values in land areas and B channel value is dominant in the sea areas discovered by the analyses of both visible images and infrared images. By these information, R and B channel values are applied to land areas and R and G channel values are applied to the sea areas. Noise areas(areas except cloud areas) are removed from a visible image and an infrared image by a threshold value, and then land areas and the sea areas are discriminated from the noise removed image. Cloud areas are extracted from discriminated areas using R, G, B channel values and a fuzzy reasoning method, and finally kind of clouds is decided by combining same cloud areas included in both the visible image and the infrared image. In comparison with a conventional quantization method, we verified that the performance of cloud analysis by the proposed method is more efficient through experiments.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.202-212
• /
• 2017

This study was to establish the interrelation between chemical compositions and near infrared (NIR) spectra for the classification on distinguishability of domestic gymnosperms. Traditional wet chemistry methods and infrared spectral analyses were performed. In chemical compositions of five softwood species including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cypress (Chamaecyparis obtusa), and cedar (Cryptomeria japonica), their extractives and lignin contents provided the major information for distinction between the wood species. However, depending on the production region and purchasing time of woods, chemical compositions were different even though in same species. Especially, red pine harvested from Naju showed the highest extractive content about 16.3%, whereas that from Donghae showed about 5.0%. These results were expected due to different environmental conditions such as sunshine amount, nutrients and moisture contents, and these phenomena were also observed in other species. As a result of the principal component analysis (PCA) using NIR between five species (total 19 samples), the samples were divided into three groups in the score plot based on principal component (PC) 1 and principal component (PC) 2; group 1) red pine and Korean pine, group 2) larch, and group 3) cypress and cedar. Based on the chemical composition results, it was concluded that extractive content was highly relevant to wood classification by NIR analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.103-110
• /
• 2018

Infrared signatures emitted from naval ships are mainly classified into internal signatures generated by the internal combustion engine of the ship and external signatures generated from the surface of the ship heated by solar heat. The internal signatures are also affected by the chemical components ($CO_2$, $H_2O$, CO and soot) of the exhaust plumes generated by the gas turbine and diesel engine, which constitute the main propulsion system. Therefore, in this study, the chemical composition ratios of the exhaust plumes generated by the gas turbines and diesel engines installed in domestic naval ships were examined to identify the chemical components and their levels. The influence of the chemical components of the exhaust plumes and their ratios on the infrared signatures of a naval ship was investigated using orthogonal arrays. The infrared signature intensity of the exhaust plumes calculated using infrared signature analysis software was converted to the signal-to-noise ratio to facilitate the analysis. The signature analysis showed that $CO_2$, soot and $H_2O$ are the major components influencing the mid-wave infrared signatures of both the gas turbine and diesel engine. In addition, it was confirmed that $H_2O$ and $CO_2$ are the major components influencing the long-wave infrared signatures.