• 한국안광학회지
• /
• 제9권1호
• /
• pp.29-34
• /
• 2004

본 연구는 타각적 검사장비의 개발을 위한 연구로 PC를 기반으로 Foucault Test (Knife edge Test)를 이용하여 굴절상태의 측정을 목표로 하였다. Knife edge Test를 이용하여 입사광선이 망막에서 반사된 출사광선의 이미지를 CCD 카메라를 사용하여 촬영하고, 그 이미지를 분석하여 반사상의 지름을 측정하여 동공의 크기를 측정하였다. 또한 반사 이미지의 방향으로 굴절상태를 판정하고 반사 이미지의 높이를 측정하여 굴절이상도를 확인하였다. 구면수차는 반사상과 반대방향에 나타나는 부반사 이미지의 명도를 비교하여 측정하였고, 그 크기를 통해 수차값을 계산할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.224-226
• /
• 2016

기술의 발전과 민간수요 급증으로 '무인 자율화', '이동체' 특성이 결합된 무인이동체 신시장이 급성장하고 있다. 현재 일부 국가들이 시범주행을 허용하고 있으나, 자율주행차의 정식 운행을 제도화 한 나라는 없다. 기존 차량의 경우에도 후방감지기의 잦은 오작동이나, 후방카메라의 사각지대 또는 운전자의 부주의 때문에 안전사고가 자주 일어나고 있다. 이러한 사소한 결함들을 보완이 되어야 자율주행차, 소형드론의 상용화를 위한 관련 규제를 완화 할 수 있을 것이다. 본 논문에서는 기존의 이동체에서 사용되었던 초음파, 레이저 센서와는 다르게 깊이 카메라를 이용하여 거리측정을 시도해보려 한다. 깊이 카메라는 레이저나 적외선을 객체나 대상 영역에 비추어 되돌아오는 광선을 받아 시간 차이를 계산하는 TOF 방식으로 거리 정보를 계산한다. 이런 카메라는 CCD 카메라 영상 화소 단위로 깊이 정보를 얻을 수 있어 실시간 깊이 정보를 모으는 데 활용할 수 있다. 이런 실시간 깊이 정보들을 이용하여 앞서 말한 문제점을 해결하고, 거리측정을 통한 장애물 회피 시스템 설계를 제안한다.

• 천문학회보
• /
• 제38권2호
• /
• pp.83.2-83.2
• /
• 2013

Camera for QUasars in EArly uNiverse (CQUEAN) is an optical CCD camera developed by the Center for the Exploration of the Origin of the Universe (CEOU). In 2010 August, CQUEAN was attached on the 2.1m Otto Struve Telescope at the McDonald Observatory in Texas, USA. As the main purpose of CQUEAN is detecting the Lyman breaks of redshift ~5 quasars, it is sensitive to near-infrared wavelengths (0.7-1.0 ${\mu}m$). For the auto-guiding system, it is using a rotating guide arm to find guide stars on the Cassegrain off-axis focus of the telescope. We plan to upgrade a new filter wheel system consists of a series of narrow band filters. We will install this independent auto-guiding units on the finder scope, which makes rooms on the Cassegrain focal plane of the main telescope. In this presentation we present the system architecture of the CQUEAN Auto-guiding Package (CAP).

• 중소기업융합학회논문지
• /
• 제6권3호
• /
• pp.85-91
• /
• 2016

이 논문의 목적은 낮은 화소 수나 어두운 렌즈를 사용하는 CCTV는 자동차의 번호판이나 범죄자를 인식하기 어렵기 때문에 화소수를 높이고 밝은 렌즈를 사용하기 위함이다. 구면수차와 왜곡수차를 줄이기 위하여 2매의 비구면 렌즈를 적용하고 300만 화소에 적절한 줌렌즈의 설계와 이에 의한 특성을 제시하였다. 초점거리는 6-60mm를 적용하였고 F수는 1.2를 구현하였다. 적외선 보정을 실시하여 주야 초점거리가 같도록 설계하였다. 결과적으로 이 규격은 6-60mm 10배줌 렌즈의 규격 중 가장 우수하다. 이 렌즈를 적용한다면 50m거리에서 얼굴이나 차번호의 인식이 가능하다. 향후 이 렌즈의 자동화 구현이 필요하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.803-807
• /
• 2003

Tele-operation and remote monitoring techniques are essential and important technologies for performing the inspection and repair tasks effectively in nuclear power plants. This paper presents the application of a mobile robot for the remote monitoring and inspection of the Calandria faces, where human access is limited because of the high-level radioactive environments during full power operation. The mobile robot was designed with reconfigurable crawler type of wheels attached on the front and rear side in order to pass through the ditch. The extendable mast, mounted on the mobile robot, can be extended up to 8 m vertically. This robot was also equipped a visible CCD/thermal infrared inspection head module and a stereo camera module for the enhancement of visual inspection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.507-510
• /
• 1996

In this paper we present the multi-agent robot system developed for participating in micro robot soccer tournament. The multi-agent robot system consists of micro robot, a vision system, a host computer and a communication module. Mcro robot are equipped with two mini DC motors with encoders and gearboxes, a R/F receiver, a CPU and infrared sensors for obstacle detection. A vision system is used to recognize the position of the ball and opponent robots, position and orientation of our robots. The vision system is composed of a color CCD camera and a vision processing unit. Host computer is a Pentium PC, and it receives information from the vision system, generates commands for each robot using a robot management algorithm and transmits commands to the robots by the R/F communication module. And in order to achieve a given mission in micro robot soccer game, cooperative behaviors by robots are essential. Cooperative work between individual agents is achieved by the command of host computer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.240-245
• /
• 2000

In this study, thickness, density and effective thermal conductivity of frost forming on the horizontal cylinder were measured with various air temperature and humidity. Reynolds number and temperature of cooling surface are controlled 17300 and $-l5^{\circ}C$ respectively. In each case of air temperature $5^{\circ}C,\;10^{\circ}C,\;15^{\circ}C,$ varying absolute humidity, experiments were executed. In measuring frost surface temperature and thickness of frost layer, infrared thermocouples and CCD camera were used. Frost was gathered from cylinder to measure mass of frost layer. Experimental data showed that the thickness and effective thermal conductivity of the frost layer increase with respect to time. Thickness of frost layer increase with humidity increasing, and density of frost layer increase with air temperature rising. Frost growth with air temperature and density of frost layer with humidity are affected by whether dew point is below or above freezing point.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.434-438
• /
• 1996

In this paper we present the multi-agent robot system and the vision system developed for participating in micro robot soccer tournament. The multi-agent robot system consists of micro robot, a vision system, a host computer and a communication module. Micro robot are equipped with two mini DC motors witf encoders and gearboxes, a R/F receiver, a CPU and infrared sensors for obstacle detection. A vision system is used to recognize the position of the ball and opponent robots, position and orientation of our robots. The vision system is composed of a color CCD camera and a vision processing unit(AISI vision computer). The vision algorithm is based on morphological method. And it takes about 90 msec to detect ball and 3-our robots and 3-opponent robots with reasonable accuracy

• 천문학논총
• /
• 제21권2호
• /
• pp.67-74
• /
• 2006

We have developed a control electronics system for an infrared detector array of KASINICS (KASI Near Infrared Camera System), which is a new ground-based instrument of the Korea Astronomy and Space science Institute (KASI). Equipped with a $512{\times}512$ InSb array (ALADDIN III Quadrant, manufactured by Raytheon) sensitive from 1 to $5{\mu}m$, KASINICS will be used at J, H, Ks, and L-bands. The controller consists of DSP(Digital Signal Processor), Bias, Clock, and Video boards which are installed on a single VME-bus backplane. TMS320C6713DSP, FPGA(Field Programmable Gate Array), and 384-MB SDRAM(Synchronous Dynamic Random Access Memory) are included in the DSP board. DSP board manages entire electronics system, generates digital clock patterns and communicates with a PC using USB 2.0 interface. The clock patterns are downloaded from a PC and stored on the FPGA. UART is used for the communication with peripherals. Video board has 4 channel ADC which converts video signal into 16-bit digital numbers. Two video boards are installed on the controller for ALADDIN array. The Bias board provides 16 dc bias voltages and the Clock board has 15 clock channels. We have also coded a DSP firmware and a test version of control software in C-language. The controller is flexible enough to operate a wide range of IR array and CCD. Operational tests of the controller have been successfully finished using a test ROIC (Read-Out Integrated Circuit).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1550-1554
• /
• 2004

This paper deals with an unmanned vehicle system configuration using all terrain vehicle. Many research institutes and university study and develop unmanned vehicle system and control algorithm. Now a day, they try to apply unmanned vehicle to use military device and explore space and deep sea. These unmanned vehicles can help us to work is difficult task and approach. In the previous research of unmanned vehicle in our lab, we used 1/10 scale radio control vehicle and composed the unmanned vehicle system using ultrasonic sensors, CCD camera and kinds of sensor for vehicle's motion control. We designed lane detecting algorithm using vision system and obstacle detecting and avoidance algorithm using ultrasonic sensor and infrared ray sensor. As the system is increased, it is hard to compose the system on the 1/10 scale RC car. So we have to choose a new vehicle is bigger than 1/10 scale RC car but it is smaller than real size vehicle. ATV(all terrain vehicle) and real size vehicle have similar structure and its size is smaller. In this research, we make unmanned vehicle using ATV and explain control theory of each component