To obtain the basic information for agricultural utilization of germanium (Ge), the growth characteristics and Ge absorption in rice plant were investigated under different Ge concentrations by foliar spray application. The Ge concentrations were treated with 0 (control), 10, 20, 40 and $80mg\;L^{-1}$ in pot (1 5000$^{-1}$ a), respectively. The Ge absorption rate in rice by foliar spray application with $80mg\;L^{-1}$ in pot was higher in the order of leaf (5.75%) > stem (4.52%) > root (<0.01%). By foliar spray application, the Ge content in rice was higher in the order of $80mg\;L^{-1}$ > $40mg\;L^{-1}$ > $20mg\;L^{-1}$ > $10mg\;L^{-1}$. When rice was treated with $80mg\;L^{-1}$ of Ge, the Ge content in rice grain was higher in the order of rice bran ($0.21mg\;pot^{-1}$) $\gg$ brown rice ($0.04mg\;pot^{-1}$) ${\geq}$ polished rice ($0.03mg\;pot^{-1}$). By foliar spray application, the Ge uptake in rice bran was higher than that in other parts. Therefore, optimum Ge concentration by foliar spray application was $80mg\;L^{-1}$ in pot based on the results from the Ge treatments.
In order to obtain the basic information for agricultural utilization of germanium (Ge), the growth characteristics, Ge uptake, and grain quality of rice plant (Hopyungbyeo) were investigated under different germanium ($GeO_2$, and commercial Ge) treatments in paddy field. Phytotoxicity was detected in $GeO_2$ treatment but not in commercial Ge treatment. The grain yield was greater in the order of control treatment > commercial Ge treatment > $GeO_2$ treatment. The dry weight was greater in order of control treatment > $GeO_2$ treatment ${\geq}$ commercial Ge treatment. The Ge content of leaf in $GeO_2$ treatment was 6 times (177 mg $m^{-2}$) higher than that in commercial Ge treatment. The Ge content in rice bran was not different in $GeO_2$, and commercial Ge treatments. The Ge contents of brown rice in$GeO_2$, and commercial treatments were 40.9, and 31.1 mg $kg^{-1}$, respectively. The Ge uptake rates in rice plant was higher in the order of leaf > rice bran > brown rice > stem > root. Under $GeO_2$, 15.56% of Ge absorbed into plant with 11.1% in leaf, 1.6% in stem, 0.03% in root, 2.2% in rice bran and 0.73% in brown rice. Under commercial Ge treatment, 5.19% of Ge absorbed into plant with 1.8% in leaf, 0.46% in stem, 0,01% in root, 2.2% in rice bran, and 0.71% in brown rice. Based on these results, the Ge contents in polished rice in commercial Ge treatment were higher than those in $GeO_2$ treatment. However, the Ge contents of rice grain (containing rice bran and polished rice) in $GeO_2$ treatment were higher than those in commercial Ge treatment.
Kim, Kyeong-Su;Chae, Byung-Gon;Cho, Yong-Chan;Lee, Choon-Oh;Song, Young-Suk
The Journal of Engineering Geology
/
v.17
no.1
s.50
/
pp.15-25
/
2007
In general, the life and asset casualties that occur due to landslide or slope failure in urban areas are larger than that in rural areas. In order to reduce the casualties, a slope management program is necessary to categorize slopes based on properties and to manage them systematically. The slope management system is the establishment of the data base for the geological and geotechnical factor according to slope stability, and the utilization of the data base to manage slopes. The suitable system must develop to slopes in urban area through the survey, analysis and evaluation process. Based on the above necessity, the slope management program which is applicable to slope management in an urban area has been developed at Hwangryung Mt. in Busan as a target area. The developed slope management program has various functions such as slope ID number of each slope or sub-region of a mountain, making a slope data sheet, analysis and grouping of slope stability, and establishment of a data base. The slope management program is constructed by use of GIS, and the survey, test and analysis data according to all slopes can be input and edited into the program. The program can also be utilized practically by end users due to the convenient input, edition printing, management and operation of slope data. Therefore, the slope management system has been established on the application of the developed program in Busan which is located in slope area. As the system is widely applied to other cities, the slope in urban area can be managed systematically and the slope hazards can be minimized.
Kim, Yiseul;Kim, Sang Yoon;An, Ju Hee;Sang, Mee Kyung;Weon, Hang-Yeon;Song, Jaekyeong
Microbiology and Biotechnology Letters
/
v.46
no.3
/
pp.253-260
/
2018
Beneficial microorganisms are widely used in the forestry, livestock, and, in particular, agricultural sectors to control soilborne diseases and promote plant growth. However, the industrial utilization of these microorganisms is very limited, mainly due to uncertainty concerning their ability to colonize and persist in soil. In this study, the survival of beneficial microorganisms in field soil microcosms was investigated for 13 days using quantitative PCR with B. subtilis group-specific primers. Bacterial community dynamics of the treated soils were analyzed using 16S ribosomal RNA (rRNA) gene amplicon sequencing on the Illumina MiSeq platform. The average 16S rRNA gene copy number per g dry soil of Bacillus spp. was $4.37{\times}10^6$ after treatment, which was 1,000 times higher than that of the control. The gene copy number was generally maintained for a week and was reduced thereafter, but remained 100 times higher than that of the control. Bacterial community analysis indicated that Acidobacteria ($26.3{\pm}0.9%$), Proteobacteria ($24.2{\pm}0.5%$), Chloroflexi ($11.1{\pm}0.4%$), and Actinobacteria ($9.7{\pm}2.5%$) were abundant phyla in both treated and non-treated soils. In the treated soils, the relative abundance of Actinobacteria was lower, whereas those of Bacteroidetes and Firmicutes were higher compared to the control. Differences in total relative abundances of operational taxonomic units belonging to several genera were observed between the treated and non-treated soils, suggesting that inoculation of soil with the Bacillus strains influenced the relative abundances of certain groups of bacteria and, therefore, the dynamics of resident bacterial communities. These changes in resident soil bacterial communities in response to inoculation of soil with beneficial Bacillus spp. provide important information for the use of beneficial microorganisms in soil for sustainable agriculture.
Today, the SSL protocol has been used as core part in various computing environments or security systems. But, the SSL protocol has several problems, because of the rigidity on operating. First, SSL protocol brings considerable burden to the CPU utilization so that performance of the security service in encryption transaction is lowered because it encrypts all data which is transferred between a server and a client. Second, SSL protocol can be vulnerable for cryptanalysis due to the key in fixed algorithm being used. Third, it is difficult to add and use another new cryptography algorithms. Finally. it is difficult for developers to learn use cryptography API(Application Program Interface) for the SSL protocol. Hence, we need to cover these problems, and, at the same time, we need the secure and comfortable method to operate the SSL protocol and to handle the efficient data. In this paper, we propose the SSL component which is designed and implemented using CBD(Component Based Development) concept to satisfy these requirements. The SSL component provides not only data encryption services like the SSL protocol but also convenient APIs for the developer unfamiliar with security. Further, the SSL component can improve the productivity and give reduce development cost. Because the SSL component can be reused. Also, in case of that new algorithms are added or algorithms are changed, it Is compatible and easy to interlock. SSL Component works the SSL protocol service in application layer. First of all, we take out the requirements, and then, we design and implement the SSL Component, confidentiality and integrity component, which support the SSL component, dependently. These all mentioned components are implemented by EJB, it can provide the efficient data handling when data is encrypted/decrypted by choosing the data. Also, it improves the usability by choosing data and mechanism as user intend. In conclusion, as we test and evaluate these component, SSL component is more usable and efficient than existing SSL protocol, because the increase rate of processing time for SSL component is lower that SSL protocol's.
The objective of this study is to determine Tasseled Cap Transformation (TCT) coefficients for the Geostationary Ocean Color Imager (GOCI). TCT is traditional method of analyzing the characteristics of the land area from multi spectral sensor data. TCT coefficients for a new sensor must be estimated individually because of different sensor characteristics of each sensor. Although the primary objective of the GOCI is for ocean color study, one half of the scene covers land area with typical land observing channels in Visible-Near InfraRed (VNIR). The GOCI has a unique capability to acquire eight scenes per day. This advantage of high temporal resolution can be utilized for detecting daily variation of land surface. The GOCI TCT offers a great potential for application in near-real time analysis and interpretation of land cover characteristics. TCT generally represents information of "Brightness", "Greenness" and "Wetness". However, in the case of the GOCI is not able to provide "Wetness" due to lack of ShortWave InfraRed (SWIR) band. To maximize the utilization of high temporal resolution, "Wetness" should be provided. In order to obtain "Wetness", the linear regression method was used to align the GOCI Principal Component Analysis (PCA) space with the MODIS TCT space. The GOCI TCT coefficients obtained by this method have different values according to observation time due to the characteristics of geostationary earth orbit. To examine these differences, the correlation between the GOCI TCT and the MODIS TCT were compared. As a result, while the GOCI TCT coefficients of "Brightness" and "Greenness" were selected at 4h, the GOCI TCT coefficient of "Wetness" was selected at 2h. To assess the adequacy of the resulting GOCI TCT coefficients, the GOCI TCT data were compared to the MODIS TCT image and several land parameters. The land cover classification of the GOCI TCT image was expressed more precisely than the MODIS TCT image. The distribution of land cover classification of the GOCI TCT space showed meaningful results. Also, "Brightness", "Greenness", and "Wetness" of the GOCI TCT data showed a relatively high correlation with Albedo ($R^2$ = 0.75), Normalized Difference Vegetation Index (NDVI) ($R^2$ = 0.97), and Normalized Difference Moisture Index (NDMI) ($R^2$ = 0.77), respectively. These results indicate the suitability of the GOCI TCT coefficients.
Proceedings of the Materials Research Society of Korea Conference
/
2011.05a
/
pp.5-5
/
2011
The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.
Whereas the demand for development of forested areas covering more than 60% of Korean territory, permission on the forest development has been still given from the perspective of effective land utilization rather than conservation. As the assessment of large forested areas usually focuses more on forest structure, it has its limitation of observing and analyzing the interior change in forest in this way. This study was aimed at computing landscape metrics using a presence vegetation map and FRAGTSTATS 4.2 and analyzing vegetation mosaics. Colonies in native vegetation were classified into a series of major groups and sub-groups based on the native species within the colonies. The colonies were investigated by analyzing a suite of landscape metrics - Core Area, Percentage of Landscape, Number of Patches, Patch Density, Largest Patch Index, Total Edge, Edge Density, Landscape Shape Index, Mean Patch Area, Euclidean Nearest Neighbor. In the Chungnam province major groups and sub-groups of colonies classified based on the proportion of pine and oak species, and pine species was the principal one in terms of distribution area. As for the competition between pines and oaks, while the coverage of pine-centered colonies were three times larger than those of oak-centered ones, pine colonies showed the greater number of patches and therefore higher fragmentation than oaks at the major group level. For the sub-groups, the largest coverage colonies were not only indicated by Pinus densiflora-Quesrcus mongolica colonies among P. densiflora-centered colonies, Q. accutissima colonies among Q. accutissima-centered ones, Q. accutissima-P. densiflora colonies among Q. accutissima-centered ones, Q. mongolica colonies among Q. mongolica-centered ones, P. thumbergii colonies among P. thumbergii-centered ones, and Q. serrata-Q. acutissima colonies among Q. serrata-centered ones, but also revealed more severely mosaicked than other smaller colonies. The overall mosaicking degree estimated by landscape metrics was considered useful for monitoring and investigating vegetation. However, in order to develop management strategy based on analyzing the reason for the mosaicking process and anticipating a trend in vegetation succession, it is essential to further study about ecological characteristics of each colony in the vegetation.
Journal of Agricultural Extension & Community Development
/
v.6
no.2
/
pp.75-84
/
1999
Minnesota state law requires County Extension Committees (CECs). The County Board of Commissioners appoints committee members. Extension Educators are responsible for using CECs to assure the value of Extension work in the County. This paper will explore underlying values, principles and practices that can effect the utilization of CECs in ways that benefit the work of Extension and make the process a good experience for CEC members and Extension Educator. The paper is based primarily on readings in the Journal of Extension, interviews with two Extension Educator, and information provided by the University of Minnesota Extension Service for CEC members.
Journal of agricultural medicine and community health
/
v.34
no.1
/
pp.87-100
/
2009
Objectives: This study was conducted to suggest the way to improve the tobacco control program of public health centers in Korea. Methods: A survey with a self-administered questionnaire was conducted among 246 persons in charge of tobacco control work in public health centers nationwide in December, 2006. Frequency analysis was performed with a final sample of 212 respondents with SPSS 12.0 for Windows. Results: The duration of engagement in tobacco control work was less than 3 years among 86.7% of respondents, and 87.3% of respondents had other duties besides tobacco control. Almost all public health centers conducted a campaign with posters or leaflets, and smoking prevention education among adolescents. The actual priority for programs was based on the community diagnosis in only 33.5% of the cases. Only 1.9% of respondents complained lack of budget, on the other hand, 44.7% of respondents appealed insufficient number of personnel. The route of knowledge and skill was largely dependent on self-learning or information from colleague. Collaboration with other related department was done well in 39.5% of the cases. The majority of respondents was satisfied with the general support from central government. Conclusions: To improve the tobacco control program of public health centers, it is needed the reinforcement of capacity and specialty among personnel, priority setting and performance of programs based on the scientific evidence, induction of community participation, utilization of community human resources, development of education and training course for practical skill, effective networking among departments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.