This study is to compare the effect of estrus synchronization and embryo transfer between Korean and Mongolian cattle. Embryos were collected from 9 donors housed in Asan city in South Chungcheong Province, South Korea. Embryos were collected 9 donors from Khushaat sum, Selenge province and Bayanchandmani sum, Tov province in Mongolia. Follicle Stimulating Hormone (FSH), Controlled Internal Drug Release (CIDR) and Prostaglandin (PG) were used for superovulation. Subsequently, Artificial Insemination (AI) was done for donor cow and embryo was collected after 7 and 8 days. Collected embryos were compared between Mongolian and Korean cattle. Finally, good quality and fresh embryos were transferred to 50 and 22 recipients of cows in Korea and Mongolia respectively. The findings show that Korean native cattle each donor cow produced on an average 16.9 embryos and, 10.9 embryos were found transferable. But in case of Mongolia the average production of embryos per donor cow was 8.6 embryos and, 6.2 embryos were found transferable. Embryo collection after 7 and 8 days was not difference in embryo production in Korea. But, in Mongolia embryo production after 8 days was found more efficient than the 7 days. Korean native recipient's cows (74.6%) and Mongolian recipient's cows (71.0%) respectively were found transferable ovarian stage. The result suggested that efficiency of embryo production from the superovulation method treated of Korean cow were higher than the Mongolian cow. The pregnancy rate of Korea native cattle was 72%, which was about 10% higher than that of Mongolia cattle.
Park, Byoung-Seong;Kim, Sang-Ha;Chang, Il-Doo;Lee, Hee-Bong;Kwon, Kyoung-In
The Journal of Korean Institute of Communications and Information Sciences
/
v.36
no.12B
/
pp.1647-1658
/
2011
This paper suggests the methods to improve the wireless backhaul link of the Relay FDD mode that 3GPP LTE-Advanced supports. New RRC message and Relay startsup procedure are introduced to apply Carrier Aggregation in the Relay wireless backhaul. Also, we design new reference signal that makes Type 1 Relay operated in full-duplexing, expecting to maximize the radio resource utilization. And, we propose the efficient configuration for the periodic uplink control information under the backhaul subframe allocation method in LTE-Advanced Relay. Hereafter, the standard activities in the 3GPP RAN is supposed to focus on the improvement of the LTE-Advanced features. Therefore, the suggestions in this paper are expected to be actively discussed in the LTE-Advanced future releases.
Journal of the Korea Institute of Information and Communication Engineering
/
v.18
no.12
/
pp.3049-3054
/
2014
PST stands for the Premium Sales Tool for Product Consulting is customized product catalog system. In other words, the product classification categories of content for consulting and sales to customers by providing useful information for the maximization of an overall system. These problems with mobility and flexibility of updating the solution to integrate mobile with mobile devices, but high-performance high-resolutions era content data continuously, but still it is difficult to handle. In this paper, to solve this problem, depending on the user's gesture by allowing periodic allocation and release of a problem for load generation enhanced by improving the PST system has been designed and implemented. Implementation was a result of the test the performance of the system, that PA system that has been provided by the traditional DA system show the allocation and the average 78% of the rate of decrease the load is released in the frequency of page, CPU utilization was reduced an average 72% I was confirmed.
The quality assurance issue of drug products is more important than the general product because it is highly related to the human health and life. In this reason, the regulatory guide lines have continuously been intensified all around the world. In order to achieve effective quality assurance and real-time product release (RTPR) of drug products, process analytical technology (PAT), which can analyze and control a manufacturing process, has been proposed from the United States. With the PAT process, we can obtain significant process features of materials, quality characteristics and product capabilities from a raw material to the final product in the real-time procedure. PAT can also be utilized to process validation using information system that can analyze the risk of drug products through out an entire product life-cycle. In this paper, we first offered a new concept for the off-line process design methods to prepare the improved quality assurance restrictions and a real-time control method by establishing an information system. We also introduced an automatic inspection system by obtaining surrogate variables based on drug product formulations. Finally, we proposed an advanced PAT concept using validation and feedback principles through out the entire life-cycle of drug product manufacturing processes.
Journal of the Korea Institute of Information and Communication Engineering
/
v.20
no.11
/
pp.2045-2053
/
2016
Many research institutes have studied 3D stereoscopic images since the release of 3D stereoscopic film 'Avatar' in 2009. Universities have conducted research on and studied 3D stereoscopic image in various ways, and even university curriculums have adopted 3D stereoscopic image production courses. However, universities face many difficulties in purchasing expensive equipment including cameras and rigs for 3D stereoscopic image contents production training. This paper addresses the 3D stereoscopic image content production curriculum using software in university. A practical training course was carried out based on the theoretical contents and theories that must be dealt with in 3D stereoscopic image contents production curriculum. As a result, students could understand the principles of 3D stereoscopic image production and produce various 3D stereoscopic images using various software applications. In this parer, proper instructional methods for 3D stereoscopic image contents production in university are discussed through this production course.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.12
no.3
/
pp.211-217
/
2019
In this study, we compare and analyze the attributes of the software development cost model according to the shape parameters change of the Type-2 Gumbel lifetime distribution using the NHPP model. In order to analyze the software failure phenomena, the parametric estimation is applied to the maximum likelihood estimation method, and the nonlinear equations are calculated using the bisection method. As a result, when the attributes of the cost curves according to the change of shape parameters are compared, it is found that the larger the number of shape parameters, the lower the software development cost and the faster the release time. Through this study, it is expected that it will be helpful for the software developers to search for the development cost according to the software shape parameters change, and also to provide the necessary information for the attributes of the software development cost.
Journal of Korean Society of Archives and Records Management
/
v.19
no.4
/
pp.211-219
/
2019
To research the directionality of Korean literary archives, this paper introduces the modern literature archive of the National Library of Korea and discusses the future direction of the archive of the National Museum of Korean Literature. The modern literature archive of the National Library of Korea is operated with focus on digitizing the original text of modern literature, providing professional release information, and constructing contents related to modern writers and literary history. As such, the National Museum of Korean Literature, which aims to open in 2023, needs to refer to the case of the National Library of Korea but introduce more professional curating. In other words, the archivist should have the initiative to document the context of the records so that literature can be reproduced creatively based on the archived data. Moreover, he/she should actively implement archive policies to expand the availability of materials.
Journal of the Korea Institute of Information Security & Cryptology
/
v.32
no.1
/
pp.77-88
/
2022
With the development and popularization of drone manufacturing technology, the drone market, which was mainly focused on industry, agriculture, and military, is also showing great growth in individual and commercial markets. Among them, DJI has a high share in the personal and commercial drone market, and accordingly, forensic analysis of DJI drones is drawing attention. In particular, when stealing and analyzing drones used in criminal acts, a technology to interpret flight logs recording drone flight paths and hardware information is needed, which inevitably applies drone models due to differences in decryption methods. Therefore, when an unidentified drone is acquired from the perspective of a digital forensic investigator, a clear classification of a drone model to which analysis can be applied is required. This paper proposes a method of extracting and analyzing artifacts of DJI drones through forensics, and analyzes media data analysis and flight log analysis results and decryption methods for three drone models with different release years of DJI. Finally, drones in the DJI product line are classified according to whether the commercialized DJI drone flight log is decrypted.
Choi, Bong Seok;Sa, Jae-Hwan;Kim, Min Wook;Jeon, Eui Chan
Korean Journal of Hazardous Materials
/
v.2
no.1
/
pp.12-17
/
2014
With a rapid growth of domestic industry in korea, now about 25,000 kinds of chemicals are being distributed, and it has been known that just about 15% of them has toxic substances. Recently, South Koreans have an anxiety about the stability and accidents of chemicals because chemical accidents like Gumi hydrofluoric acid accident have occurred. The U.S. has adopted the systems like EPCRA (Emergency Planning and Community Right-to-Know Act), TRI (Toxic Release Inventory) and TSCA (Toxic Substances Control Act), and is also managing the hazardous chemicals by providing the information about them to its people and site workers. Japan's Ministry of Health, Labor and Welfare also has adopted J-CHECK system and is implementing it to let Japanese people know the information of safety of chemicals about REACH. However, the Korean government has a difficult situation to mediate the different idea with the Korean industry to make lower statute of Pre-legislation registration & evaluation of chemicals that will be implemented and Chemical Material Control Association that is being implemented. Especially city and country areas located in the industrial areas need political improvement focusing on vulnerable area through the check about current situation of hazardous chemicals of jurisdiction and management method, but the information about the management situation of small scale work places is insufficient. Therefore this study set up the urgent management area in Ansan Smart Hub through NFPA code according to the types of accident and dander characteristics of each chemical being used in the companies that have less than 50 workers and deal with chemicals located in Ansan Smart Hub in Gyeonggi-do.
Objectives: This study aims to determine fostering stress and mental health state that mothers of handicapped children perceive as primary care givers and to analyze their demand for information assistance in order to release their stress so that it can provide materials that contribute to establishment of assistance system for families with handicapped children. Methods: The research subjects were 340 mothers whose children went to a nursery for special children, 3 general nurseries and 6 special schools in Daegu, and the data were collected using structures questionnaires. The survey analyzed mothers' fostering stress, their demand for fostering information assistance, children's daily activity abilities. Component concepts of each scale was validated by adopting confirmatory factor analysis, and factors affecting demand for fostering information assistance were analyzed by adopting covariance structural analysis. Results: Younger mothers tend to have higher demand for information, and mothers with younger children or children with double handicaps also have higher demand. Mothers under 30 have the lowest demand for public health and medical care assistance and for home and community life assistance, while mothers with children with physical handicaps have the highest. The validity of component concepts was verified by categorizing as cognitive structure models fostering stress, information demand, children's daily activity abilities, and their appropriateness was evaluated through confirmatory factor analysis using structural equation modelling. And then, GFI (more than 0.9), CFI (more than 0.9), TLI (more than 0.9) and RMSAE (less than 0.08) were used to evaluate the appropriateness. It was found that all the component concepts are valid, as every item is within appropriate range. The result of analyzing information demand demonstrated that children's handicap levels significantly affect their mothers' mental health, while fostering stress significantly affect mothers' metal health, information demand. As well, it was confirmed that mothers' mental health has a significant effect on information demand. Conclusions: Therefore, to reduce special children's mothers' uncertainty, helplessness and fostering burden, it is necessary to provide them with information on children's challenges, development and fostering and to offer them quality public health, medical care and welfare assistance along with family and local community life assistance.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.