• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.221-224
• /
• 1998

Software release over the network is the most efficacious way of software update. Software release of electronic switching system, considering its environments, is the typical case that is in need of adopting the method. The media of transferring software and data of TDX-10A electronic switching system are magnetic tapes containing them, so the MT must be delivered between remotely placed office and package generation system. SMART-10A system provides the file tranfer on the data network between TDX-10A and the package generation system and ability of remote application of new software. This paper shows the implementation of file transfer between TDX-10A and computer system connected by data networks, status handling for duplicated system, and monitor process design with IPC on UNIX system.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1183-1194
• /
• 1998

This paper describes a theoretical model developed for analyzing the heat transfer of automotive cooling systems. From the model, heat transfer rate of automotive cooling systems can be predicted, providing useful information at the early stages of the design and development. The aim of the study is to develop a simulation program for automotive cooling system analysis and a performance analysis program for analyzing heat exchanger. Heat release rate from combustion gas to coolant through cylinder wall in engine cylinder was analyzed by using a two zone combustion model. This paper studied how cooling condition would affect engine heat release rate and measured temperature distribution of coolant in water jacket.

• Toxicological Research
• /
• 제16권4호
• /
• pp.311-315
• /
• 2000

Previous studies showed that benzoquinone derivatives inhibited platelet aggregation. but there is no information available on their cytotoxicity to platelets. 1n the present study. washed platelets isolated from rats were treated with 1.4-benzoquinone. a representative benzoquinone derivative. to examine its antiaggregating effect and cytotoxicity. 1.4-Benzoquinone significantly inhibited thrombin-induced platelet aggregation. Consistent with this finding. 1.4-benzoquinone suppressed cytosolic calcium increase induced by thrombin. To examine the cytotoxicity by 1 A-benzoquinone in platelets. turbidometry and lactate dehydrogenase release were measured. Treatment with 1.4-benzoquinone resulted in slight cytotoxicity (30% release at 60 min) to platelets. However. the cytotoxicity was not correlated with increase of cytosolic calcium levels in platelets. All these data suggested that 1.4-benzoquinone inhibited thrombin-induced platelet aggregation mediated by inhibition elf calcium level increase and that 1.4-benzoquinone reveals cytotoxicity to some extent without alteration of calcium level in platelets.

• Environmental Engineering Research
• /
• 제14권1호
• /
• pp.13-18
• /
• 2009

In this study, specific pollutant releases during the Asian monsoon season were estimated and the information was applied to the non-point pollutant sources management from two forested watersheds of the Soyang Lake. The two watersheds are part of the 2,703 km2 Soyang Lake watershed in the northern region of the Han River. The outlets of the two watersheds were respectively analyzed for continuous water quality concentration and for discharge during various single rainfall events. Statistical power function methods are utilized to compare stream discharge and pollutant flux release during the study period. Based on the monitoring data during the study period, the specific load flux method using simulated discharge was conducted and validated in the two watersheds. The model predictions corresponded well with the measured and calculated pollutant releases. The modeling approach taken in this study was found to be applicable for the two forested watersheds.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.781-785
• /
• 2016

위험물인 염산을 취급하는 사업장에서 발생할 수 있는 사고를 알아내고 사고시 인근에 미치는 영향을 평가하여 어느 정도 위험이 있는지 알아보며 이에 대한 대비책을 적용하고자 하였다. 취급 화학물질 정보와 공정정보로부터 사고 시나리오를 선정하고 염산 누출시 사업장외로 영향을 미치는 사고 시나리오를 선정하여 환경부의 지침에 따라서 ALOHA를 활용하여서 평가하였다. 최악의 사고 시나리오를 비롯한 사고 시나리오를 평가하였으며 이들의 사고시 피해완화대책도 살펴보았다. 평가결과 염산생산시설은 현재의 안전조치가 충분하여서 추가의 개선대책이 필요하지 않은 것으로 판명되었다.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.55-59
• /
• 2002

Delamination means that cracking occurs on the interface layer between composite laminates. In this paper, to predict the delamination growth in composite laminates subjected to low-velocity impact, the unit load method was introduced, and an eighteen-node 3-D finite element analysis, based on assumed strain mixed formulation, was conducted. Strain energy release rate, necessary to determine the delamination growth, was calculated by using the virtual crack closure technique. The unit load method saves the computation time more than the re-meshing method. The virtual crack closure technique enables the strain energy release rate to be easily calculated, because information of the singular stress field near the crack tip is not required. Hence, the delamination growth in composite laminates that are subjected to low-velocity impact can be efficiently predicted using the above-mentioned methods.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.60-69
• /
• 1998

Polysilicon surface mdoification tecnique is developed to reduce the sticking of microstructures fabricated by micromachining. Modified anti-sticking grain holes are simply formed by two-step dry eth without additional photolithography nor deposition of thin films. Both process-induced sticking and in-use sticking are successfully reduced more than two times by adopting grain holed polysilicon substrate. A sticking model for cantilever beam is derived. This model includes bending moment stems from stress gradient along the thickness directionof structural polysilicon. Because the surface tension of rinse liquid and the surface energy of the solids to be stuk tend to decrease in recently developed anti-sticking techniques, the effect of stress gradient will play an important role to analyze the sticking phenomena. Effect of the temperature during post-release rinse and dry is modelled and verified experimentally. Based on developed anti-sticking polysilicon structure and the sticking model, sticking of microstructure, fabricated by simple wet process including sacrificial layer etch and rinse with deionized water without special equimpment for post-release rinse and dry was alleviated more than 3.5 times.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.597-604
• /
• 2014

Laboratory-scale landfills (simulated landfills) were designed to determine the formaldehyde released into air and leachate from medium density fiberboard (MDF). Simulated landfills were constructed using cylindrical plastic containers containing alternating layers of soil and MDF for a total of five layers. The highest concentration of formaldehyde was found in the air and leachate from the MDF only treatment compared to treatments containing MDF and soil. At the end of the study (28 days), formaldehyde concentrations in air and leachate from treatments containing MDF and soil decreased by 70 percent and 99 percent, respectively, while the treatment containing MDF only still released formaldehyde into the air and leachate. Therefore, waste MDF after storing 4 weeks in water may be recycled as compost or mulch based on formaldehyde leaching. Also, these data indicate soil restricts formaldehyde release into air and leachate and provides new information about the fate of wood-based composite waste containing UF resin disposed in landfills.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.389-394
• /
• 2001

The notched Charpy and Izod impact tests arc the most prevalent techniques used to characterize the effects of high impulse loads on ploymeric materials. An analysis method for rubber toughened PVC is suggested to evaluate critical strain energy release rates(Gc) from the Charpy impact energy measurements. An Instrumented Charpy impact tester was used to extract ancillary information concerning fracture properties in addition to total fracture properties and maximum critical loads. The stress intensity factor Kd was computed for varying amounts of rubber contents from the obtained maximum critical loads and also toughening effects were investigated as well.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.153-165
• /
• 1996

This paper presents an order releasing algorithm for an AMS. Order release policy determine order releasing time to shop floor so as to improve order management and shop performance. The proposed order releasing algorithm can cope with the dynamic environment of orders(e.g. change or cancel of order) flexibly and fastly, by processing individual order and exchanging the information(e.g. compeletion time or lateness of order, etc) with customer. And the objective of the order releasing algorithm is the observance of the due-date, therefore, it can provide customer with a reliability of order. Computer simulation is used to obtain the makespan of order which is the input data of the order releasing algorithm. The eight candidate part dispatching rules are simulated to selected an effective part dispatching rule for the computer simulation. By using the best effective part dispatching rule, the computer simulation is conducted to determine order releasing time.