• 제목/요약/키워드: Information release

검색결과 771건 처리시간 0.027초

폴리머 시멘트 모르타르의 연소특성 평가 (The Combustion Character of Polymer Modified Cement Mortar)

  • 박동천;오광석;김효열;오상균;강병희
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2008년도 추계 학술논문 발표대회
    • /
    • pp.63-66
    • /
    • 2008
  • Not only mechanical properties, bonding properties, electro chemical properties, etc. but also fire safety is required in patch repair materials such as polymer modified cement mortar (PCM) which are used to deteriorated reinforced concrete structure. Unfortunately, it is very difficult to choice the appropriate repair materials because there are not enough information about fire safety properties of PCM. In this study, The combustion characters of PCM were evaluated through the heat release rate test and non-combustibility test. The pyrogenicity test uses the cone calorimeter based on the oxygen consumption method. The non-combustibility test is from the temperature change inside the furnace during the test. The effect of the types of polymer and polymer content were evaluated from the series of test. The results are like followings. 1) The higher the W/C of PCM, the lower the gross calorific value and heat generation rate in the heat release rate test. The amount of heat generation of PCM is like the order of VVA, EVA, and SBR in this study. 2) Some materials such as E45-100, E50-100, E60-100, S50-50, and S50-100 were estimated as not appropriate building materials in the non combustibility test.

  • PDF

실규모 실험에 의한 고체가연물의 화재특성 연구 (A Study on Fire Characteristics of Solid Combustible Materials Based on Real Scale Fire Test)

  • 김성찬
    • 한국화재소방학회논문지
    • /
    • 제25권5호
    • /
    • pp.62-68
    • /
    • 2011
  • 본 연구는 고체가연물의 초기 점화 및 화재성장과정에서의 발열량을 정량적으로 측정하고 가연물에 따른 화재성장특성 파악하고자 한다. 실험에 적용된 고체가연물은 단일/이중 목재크립, 단일/이중 쿠션, 카페트/목재크립이며 화재발달 단계에서 화재성장특성을 시간 제곱 화재성장 시나리오와 비교분석하고 고체가 연물의 화재성장 계수를 정량화 하였다. 고체가연물의 연소과정에서 소모되는 연료의 질량과 방출되는 총열에너지 개념을 이용하여 가연물의 평균 유효연소율을 평가하였으며 환기 및 화재조건의 영향을 분석하여 화재해석시 화재시나리오를 설정하는데 있어서 실질적인 정보를 제공하고자 한다.

창던지기기 남자 국가대표 중점지원 선수의 기술동작 분석 (The Kinematical Analysis of Supported Athlete's Technical Motion in Javelin Throw)

  • 이순호
    • 한국운동역학회지
    • /
    • 제23권1호
    • /
    • pp.1-9
    • /
    • 2013
  • The purpose of this study was to provide information on athletes' characteristics and advantages and disadvantages by analyzing the kinematic factors having a decisive influence on competitive abilities such as release conditions in the delivery phase on major Korean javelin athletes. Two supported javelin throwers of the Korean national team participated in this study. The total average time required of the delivery phase was 0.31(${\pm}0.016$). The athletes' release angle was 33.2 to 41.7 degrees. The attack angle varied widely from -3.5 to 5.9 degrees. The Javelin heights of Subject A and B were 95.9 and 89.2%Ht. The average stride length were 180.6 and 176.7cm. The center of mass velocity of LFD and REL was relatively low in all the subjects. The average deceleration rates of center of mass velocity of Subject A and B were 57.2 and 48.9%lose. The left knee angles of Subject A and B were 160.1 and 155.5 degrees in LFD, 153.0 and 164.0 degrees in REL. The joint velocity of upper limb segments was relatively low in all the subjects. The maximum average wrist velocity of Subject A and B was 18.2 and 16.3 m/s in REL.

언론보도를 통해 본 도서관에 대한 사회적 인식과 요구 분석 : '기적의 도서관' 을 중심으로 (An Analysis of Social Recognition and Demand for Libraries based on Press Release: focusing on 'the Miracle Library')

  • 이용훈
    • 한국정보관리학회:학술대회논문집
    • /
    • 한국정보관리학회 2006년도 제13회 학술대회 논문집
    • /
    • pp.281-288
    • /
    • 2006
  • 2000년 이후 우리나라 언론보도에 나타난 도서관 관련 기사에 대한 계량적 분석을 통해 우리나라 도서관에 대한 사회적 인식과 요구가 어떤 것인지를 파악해 보았다. 그 중에서 기적의 도서관 관련한 내용에 대한 내용분석을 시도하였다. 이러한 분석결과를 기반으로 향후 도서관계의 언론홍보 방안을 제시하였다.

  • PDF

화학반응수치해석을 이용한 HCCI기관의 예혼합기의 성층화성이 연소시의 압력 상승률에 미치는 영향 (Numerical Analysis of Effect of Inhomogeneous Pre-mixture on Pressure Rise Rate in HCCI Engine by Using Multizone Chemical Kinetics)

  • 임옥택
    • 대한기계학회논문집B
    • /
    • 제34권5호
    • /
    • pp.449-456
    • /
    • 2010
  • HCCI 엔진은 고효율, 저공해를 실현할 수 있는 차세대 내연기관이다. 그러나 HCCI 엔진이 상용화되기 위해서는 몇 가지 문제점들이 해결되어야 한다. 그 중에서 가장 큰 문제점은 과도한 압력 상승률이 노킹을 발생시키기 때문에 운전영역이 제한되는 것이다. 이번 연구의 목적은 HCCI 엔진에서 압력상승률 저감을 위하여 온도 성층화와 농도 성층화 효과를 조사하는 것이다. 그리고 Multi-zone 모델을 이용한 화학반응 수치해석을 통하여 연소 및 배기가스 특성에 미치는 영향을 알아보았다. 수치해석에서 2 단계 열발생을 가지는 DME와 1단계 열발생을 가지는 메탄을 사용하였다.

Effect of growth phase of cyanobacterium on release of intracellular geosmin from cells during microfiltration process

  • Matsushita, Taku;Nakamura, Keisuke;Matsui, Yoshihiko;Shirasaki, Nobutaka
    • Membrane and Water Treatment
    • /
    • 제6권3호
    • /
    • pp.225-235
    • /
    • 2015
  • During low-pressure membrane treatments of cyanobacterial cells, including microfiltration (MF) and ultrafiltration (UF), there have reportedly been releases of intracellular compounds including cyanotoxins and compounds with an earthy-musty odor into the water, probably owing to cyanobacterial cell breakage retained on the membrane. However, to our knowledge, no information was reported regarding the effect of growth phase of cyanobacterial cells on the release of the intracellular compounds. In the present study, we used a geosmin-producing cyanobacterium, Anabaena smithii, to investigate the effect of the growth phase of the cyanobacterium on the release of intracellular geosmin during laboratory-scale MF experiments with the cells in either the logarithmic growth or stationary phase. Separate detection of damaged and intact cells revealed that the extent of cell breakage on the MF membrane was almost the same for logarithmic growth and stationary phase cells. However, whereas the geosmin concentration in the MF permeate increased after 3 h of filtration with cells in the logarithmic growth phase, it did not increase during filtration with cells in the stationary phase: the trend in the geosmin concentration in the MF permeate with time was much different between the logarithmic growth and stationary phases. Adsorption of geosmin to algogenic organic matter (AOM) retained on the MF membrane and/or pore blocking with the AOM were greater when the cells were in the stationary phase versus the logarithmic growth phase, the result being a decrease in the apparent release of intracellular geosmin from the stationary phase cells. In actual drinking water treatment plants employing membrane processes, more attention should be paid to the cyanobacterial cells in logarithmic growth phase than in stationary phase from a viewpoint of preventing the leakage of intracellular earthy-musty odor compounds to finished water.

희박 예혼합 덤프 연소기에서 OH 자발광을 이용한 열 방출에 관한 실험적 연구 (Experimental Study on Heat Release in a Lean Premixed Dump Combustor Using OH Chemiluminescence Images)

  • 문건필;이종호;전충환;장영준
    • 대한기계학회논문집B
    • /
    • 제28권11호
    • /
    • pp.1368-1375
    • /
    • 2004
  • Measurements of OH chemiluminescence in an atmospheric pressure, laboratory-scale dump combustor at equivalence ratios ranging from 0.63 to 0.89 were reported. The signal from the first electronically excited state of OH to ground state was detected through a band-pass filter with an ICCD. The objectives of this study are two: One is to see the effects of equivalence ratio on global heat release rate and local Rayleigh index distribution. To get the local Rayleigh index distribution, the line-of-sight images were inverted by tomographic method, such as Abel do-convolution. Another aim is to investigate the validity of using OH chemiluminescence acquired with an ICCD as a qualitative measure of local heat release. For constant inlet velocity and temperature, the overall intensities of OH emission acquired at different equivalence ratio showed periodic and higher value at high equivalence ratio. OH intensity averaged over one period of pressure increased exponentially with equivalence ratio. Local Rayleigh index distribution clearly showed the region of amplifying or damping the combustion instability as equivalence ratio increased. It could provide an information/insights on active control such as secondary fuel injection. Finally, local heat release rate derived from reconstructed OH images were presented fur typical locations.

Study on the Combustion Characteristics of Tulip Tree (Liriodendron tulipifera) for Use as Interior Building Materials

  • Min Ji KIM;Sang-Joon LEE;Sejong KIM;Myung Sun YANG;Dong Won SON;Chul-Ki KIM
    • Journal of the Korean Wood Science and Technology
    • /
    • 제51권5호
    • /
    • pp.410-418
    • /
    • 2023
  • In this study, the combustion characteristics of the Tulip tree, which is the representative broad-leaved afforestation tree in Korea, were analyzed. The flame retardant performance of the Tulip tree was analyzed by analyzing combustion characteristics on a total of three test samples; flame retardant treated, both flame retardant and oil stain-treated, and untreated. Then the flame retardance grade was classified for each of them. According to the result, test samples showed the strongest flame retardance were in order of flame retardant treated (C), both flame retardant and oil stain-treated (B), and untreated (A). As a result of analyzing the total heat emission and maximum heat emission rates, which is the evaluation standard for interior materials of Korean domestic buildings, test samples with flame retardant treat or flame retardant and oil stain treat were qualified for the flame-retardant standard. Both flame retardant and oil stain-treated samples showed higher total heat release (THR) and heat release rate compared to flame retardant-treated samples as the oil causes combustion with oxygen. On the other hand, they didn't qualify the THR in Quasi-non-combustible standards. To determine the correlation between the physical and combustion characteristics of wood, the combustion characteristics of other diffuse porous wood species, with which the Tulip tree is affiliated were analyzed, and noticed that the characteristic correlates with the density and quantity of wood. The results of this study are expected to be used as basic information on the combustion characteristics of the Tulip tree.

산불연료의 연소특성을 활용한 산불위험지도 작성에 관한 연구 : 강원도 삼척 시를 중심으로 (A Study on Mapping Forest Fire Risk Using Combustion Characteristic of Forest Fuels : Focusing on Samcheok in Gangwon-do)

  • Lee, Haepyeong;Park, Youngju
    • 한국재난정보학회 논문집
    • /
    • 제13권3호
    • /
    • pp.296-304
    • /
    • 2017
  • 본 연구에서는 산불발생 시 화염행동을 예측하기 위하여 강원도 삼척시를 대상으로 산림가연물의 연소특성 DB를 구축하고, 연소특성 DB로부터 GIS를 이용하여 산불위험지도 및 위험도등급화 지도를 작성하였다. 맵핑을 위한 표준화 대상변수로는 자연발화온도, 착화시간, 화염지속시간, 총열방출량, 총연기방출량을 사용하였다. 또한, 총괄위험도 등급화는 착화위험변수(자연발화온도, 착화시간)와 확산위험변수(총열방출량, 화염지속기간, 총연기방출량)를 이용하였다. 연구결과, 강원도 삼척시의 산불위험도등급은 1~5등급(5단계)으로 등급화하였으며, 1등급에 가까울수록 산불위험성이 높은 구역으로 구분하였다. 삼척시의 착화위험등급은 1등급과 5등급으로 구분되어 2단계로 나타났다. 또한, 확산위험등급은 1등급, 2등급, 4등급, 5등급으로 구분되어 4단계로 나타났다. 총괄위험등급은 1등급, 2등급, 3등급으로 구분되어 3단계로 나타났으며, 산불위험등급이 가장 높은 1등급의 구역은 산불발생위험등급과 산불확산위험등급의 영향을 받는 것으로 나타났다. 1등급에 해당하는 구역은 삼척시의 우발리와 미로면 지역으로 나타났다. 이 지역은 산불발생 시 발열량이 높게 나타나는 소나무와 참나무 군락지로 산불발생 시 화재하중이 크게 작용하여 산불확산이 빠르게 진행될 것으로 사료된다.

연속질의의 처리를 위한 이용률 기반의 적응적 메모리 관리 기법 (Adaptive Memory Management Method based on Utilization Ratio to Process Continuous Query)

  • 백성하;이동욱;어상훈;정원일;배해영
    • 한국공간정보시스템학회 논문지
    • /
    • 제11권2호
    • /
    • pp.79-88
    • /
    • 2009
  • 실시간으로 입력되는 스트림을 저장하기 위한 메모리의 크기는 동적으로 변한다. 이 데이터 스트림을 처리하는 연속질의는 저장공간의 크기를 동적으로 관리해야 한다. 이를 위해, 저장되는 현재 데이터양에 따라 즉시 페이지 단위로 메모리를 할당 및 해제하는 기본적인 메모리 관리자가 연구되었다. 그러나 이 방법은 데이터 스트림을 저장하기 위해 메모리의 할당 및 해제를 매우 빈번하게 수행하게 된다. 또한 질의가 메모리가 부족할 때 즉시 페이지를 할당하기 때문에, 특정 지연되는 질의가 대량의 페이지를 점유하는 문제를 발생시킬 수 있다. 메모리관리자에서 발생하는 이와 같은 문제에 초점을 맞추어, 본 연구는 할당 및 해제 빈도수를 감소시키고, 질의 별로 최대한 균등하게 페이지를 분배하는 메모리 관리 기법을 제안한다. 본 기법은 질의의 페이지 이용률을 이용하여 할당 및 해제 빈도수를 크게 감소시키고, 질의의 지연 상태에 따른 메모리의 할당을 통하여 특정 질의의 메모리 독점을 방지할 수 있다.

  • PDF