• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.437-442
• /
• 2001

Recently, transformerless inverters have been studied to reduce sizes and costs of utility-connected PV systems. This paper presents a transformerless PV inverter using a two-phase boost converter of reduced ripples in input current and output voltage, low voltage stress of semiconductor device and reduced size of input reactor. And new PWM method is introduced, whose on-off time is calculated from simultaneous equation induced by fourier series. To verify a validity of the proposed transformerless inverter, computer simulation has been carried out.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.574-576
• /
• 2005

스마트 홈을 구현하기 위한 핸드폰을 이용한 리모트 컨트롤러나 PDA를 통한 통합 리모트 컨트롤러 등의 통합 리모트 컨트롤러에 관한 연구는 활발히 진행되어 오고 있다. 본 논문은 이러한 리모트 컨트롤러에 관한 연구에 대해 두 가지의 새로운 방향을 생각해 보았다. 첫째로 리모트 컨트롤러를 작동시키기 위해서는 핸드폰이나 PDA등의 input 디바이스가 반드시 필요했던 단점을 보완해서 임베디드 보드에 input device 기능을 포함하는 것이다. 그리고 두 번째는 임베디드 리모트 컨트롤러에 user profile을 두어서 단순한 채널 변경의 기능만을 하는 리모트 컨트롤러가 아니라 사용자의 선호도 등의 정보를 가지고 지능적으로 집안 환경을 최적화된 조건으로 만들 수 있도록 설계 했다. 즉 사용자가 가장 좋아하는 TV채널이나 실내온도 등의 정보를 가지고 각 사용자에게 최적화된 환경을 리모트 컨트롤러가 스스로 작동시킬 수 있게 되는 것이다. 그리고 가전을 작동시키기 위해서 임베디드 보드에 있는 IrDA 통신모듈을 통해 일정한 코드 값만 보내주면 되기 때문에 일반적으로 리모트 컨트롤러로 제어가 가능한 거의 모든 전자제품이 쉽게 제어 가능하다.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.62-68
• /
• 2000

It was designed a high-speed analog input card that is a important device of ultrasonic testing flaw detector in the middle of non-destructive testing in this Paper. The A/D Board is inquired high-speed sampling rate and fast data acquisition system. This pater shows a design that has a function of Peak- Detection for ultrasonic testing by ISA Bus type and a 50MHz of A/D converter in order to do sampling more than quadruple frequency of transducer frequency.

• Journal of Communications and Networks
• /
• v.13 no.2
• /
• pp.167-174
• /
• 2011

In this paper, we propose and simulate an efficient interference cancellation scheme with an optimal ordering successive interference cancellation (SIC) algorithm for ultra wideband (UWB)/multiple-input-multiple-output (MIMO) systems in a wireless body area network (WBAN). When there are several wireless communication devices on a human body, multiple access interference (MAI) usually occurs. To mitigate the effect of MAI and achieve additional diversity gain, we utilize SIC with an optimal ordering algorithm. A zero correlation duration (ZCD) code with robust MAI capability is employed as a spread code for UWB systems in a multi-device WBAN environment. The performance of the proposed scheme is evaluated in terms of the bit error rate (BER). Simulation results confirm that the BER performance can be improved significantly if the proposed interference cancellation scheme and the ZCD code are jointly employed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.635-641
• /
• 2004

This paper presents a new low-cost RF Built-In Self-Test (BIST) circuit for measuring transducer voltage gain, noise figure and input impedance of 5.25GHa low noise amplifier (LNA). The BIST circuit is designed using 0.18${\mu}{\textrm}{m}$ SiGe technology. The test technique utilizes input impedance matching and output transient voltage measurements. The technique is simple and inexpensive. Total chip size has additional area of about 18% for BIST circuit.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.52-57
• /
• 2018

The purpose of this paper is to develop simulations that can be used for virtual education in dentistry. The virtual education to be developed will be developed with clinical training and actual case data of tooth extraction. This development goal is to allow dental students to learn the necessary surgical techniques at the point of their choice, not going into the operating room, away from time, space, and physical limits. I want to develop content using VR. Oculus Rift HMD, Optical Based Outside-in Tracking System, Oculus Touch Motion Controller, and Headset as Input / Output Device. In this configuration, the optimization method is applied convergent, and when the operation of the VR contents is performed, the content data is extracted from the interaction analysis formed in the VR engine, and the data is processed by the content algorithm. It also computes events and dental operations generated within the 3D engine programming and generates corresponding events through data processing according to the input signal. The visualization information is output to the HMD using the rendering information. In addition, the operating room environment was constructed by studying lighting and material for actual operating room environment. We applied the ratio of actual space to virtual space and the ratio between character and actual person to create a spatial composition at a similar rate to actual space.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1076-1089
• /
• 2021

Among the currently used knowledge-based authentication methods for smartphones, text and graphic-based authentication methods, such as PIN and pattern methods, use a display unit and a touch function of the display unit for input/output of secret information. Recently released smartphone form factors are trying to transform into various forms, away from the conventional bar and slate types because of the material change of the display unit used in the existing smartphone and the increased flexibility of the display unit. However, as mentioned in the study of D. Choi [1], the structural change of the display unit may directly or indirectly affect the authentication method using the display unit as the main input/output device for confidential information, resulting in unexpected security vulnerabilities. In this paper, we analyze the security vulnerabilities of the current mobile user authentication methods that is applied atypical form factor. According to the analysis results, it seems that the existing display-dependent mobile user authentication methods do not consider emerging security threats at all. Furthermore, it is easily affected by changes in the form factor of smartphones. Finally, we propose countermeasures for security vulnerabilities expected when applying conventional authentication methods to atypical form factor-based smartphones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.157-165
• /
• 2001

We analyzed the electrical characteristics of platinum silicide schottky junction to develope the voltage swing in Integrated Schottky Logic gates, and simulated the characteristics with the programs in this junctions. Simulation programs for analytic characteristics are the Medichi tool for device structure, Matlab for modeling and SUPREM V for fabrication process. The silicide junctions consist of PtSi and variable silicon substrate concentrations in ISL gates. Input parameters for simulation characteristics were the same conditions as process steps of the device farications process. The analitic electrical characteristics were the turn-on voltage, saturation current, ideality factor in forward bias, and has shown the results of breakdown voltage between actual characteristics and simulation characteristics in reverse bias. As a result, the forward turn-on voltage, reverse breakdown voltage, barrier height were decreased but saturation current and ideality factor were increased by substrates increased concentration variations.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.29-35
• /
• 1998

In this paper, the proposed audio/video control device for multiple user in the multimedia platform is changed for the better a disadvantage that must get one computer per participant to process a floor mode needed for interactive collaboration in the multimedia based distance education. It also proposed simulator of co-work environment that included multimedia data. This developed to proceed a multimedia distance education efficiently and sharing a computer among multiple users. Therefore, this is resulting in a reduction the cost needed to build a multimedia distance education system as well as totally simplified the organization of system. It also offers compatibility and generality, interfacing with the printer port of standard PC supporting the bi-direction mode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2289-2301
• /
• 2015

Mobile devices are becoming powerful enough to realize augmented reality (AR) application. This paper introduces two AR methods to estimate an environmental illumination distribution of a scene. In the first method, we extract the lighting direction and intensity from input images captured with a front-side camera of a mobile device, using its orientation sensor. The second method extracts shadow regions cast by three dimensional (3D) AR marker of known shape and size. Because previous methods examine per pixel shadow intensity, their performances are much affected by the number of sampling points, positions, and threshold values. By using a simple binary operation between the previously clustered shadow regions and the threshold real shadow regions, we can compute efficiently their relative area proportions according to threshold values. This area-based method can overcome point sampling problem and threshold value selection. Experiment results demonstrate that the proposed methods generate natural image with multiple smooth shadows in real-time.