• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.175-180
• /
• 2009

When we apply the LDPC code for high density optical storage channel, it is necessary to make an algorithm that the modulation code decoder must feed the LDPC decoder soft-valued information because LDPC decoder exploits soft values using the soft input. Therefore, we propose the soft-input soft-output run-length limited 17PP decoding algorithm and compare performance of LDPC codes. Consequently, we found that the proposed soft-input soft-output decoding algorithm using 17PP is 0.8dB better than the soft-input soft-output decoding algorithm using (1, 7) RLL.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.242-242
• /
• 2002

Two MIMAS MaX fuel rods base-irradiated in a commercial PWR have been reinstrumented and irradiated at a test reactor. The fabrication data for two MOX roda are characterized together with base irradiation information. Both Rods were reinstrumented to be fitted with thermocouple to measure centerline temperature of fuel. One rod was equipped with pressure transducer for rod internal pressure whereas the other with cladding elongation detector. The post irradiation examinations for various items were performed to determine fuel and cladding in-pile behavior after base irradiation. By using well characterized fabrication and re-instrumentation data and power history, the fuel performance code, COSMOS, is verified with measured in-pile and PIE information. The COMaS code shows good agreement for the cladding oxidation and creep, and fission gas release when compared with PIE dad a after base irradiaton. Based on the re-instrumention information and power history measured in-pile, the COSMOS predicts re-instrumented in-pile thermal behaviour during power up-ramp and steady operation with acceptable accuracy. The rod internal pressure is also well simulated by COSMOS code. Therfore, with all the other verification by COSMOS code up to now, it can be concluded that COSMOS fuel performance code is applicable for the design and license for MaX fuel rods up to high burnup.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.17-21
• /
• 2017

Since holographic data storage has the advantage of high recording density and data transfer rate, it is a candidate for the next generation storage systems. However, Holographic data storage system is affected by interpage interference and two dimensional intersymbol interference. Also, burst error occurs by physical impact. In this paper, we propose an LDPC product code using modified log-likelihood ratio and extrinsic information to correct burst error and improve performance of holographic data storage. The performance of proposed LDPC product code is 0.5dB better than that of the conventional LDPC code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.1
• /
• pp.41-53
• /
• 1988

Line drawing images are the most proper information to represent the characteristics and shapes of digital images and used for recognition and communication. For the coding of line drawing images, common eight-direction chain code is used mostly. In the paper, the new mode selection chain code method is proposed which can compress the eight-direction chain code about twenty percents and be used for the reversible coding method of line drawing images. In this coding techniques, we set a reference mode for each quadrant around an abject pixel, and assign 3-directional code for these reference modes. Therefore a line pixel is coded with 3 bits. Also, a new corner finding method of line drawing images using this mode selection chain code is proposed in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.663-673
• /
• 2011

Applications of two dimensional image codes like QR and color code on mobile phone are spreading widely and in lieu of that, better decoding technology and platform designs are required. Futhermore "Bokode" technology which recognizes the defocus-blur image information from imperceptible visual tiny code on ordinary digital camera has been announced newly. There is an urgent need for competitive strategies to activate 2D image code industry and R&D under smart environment. This paper focused on suggesting valuable idea and practical task through investigation and analysis required for supporting of thus strategy construction. Description consist of introduction, technological tendency for R&D, patent and market, implementation task, conclusion and suggestion.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.461-464
• /
• 1988

In order to use mBIZ code as the practical transmission code, the information block length have to be determined. If the information block length is short, timing information disapperance is reduced, but transmission speed is increased as the result of inserted redundancy bit. While, if the information block length is long, timing information disapperance and jitter are caused. So it is very important to determine the optimal timing information block length. Therefore, in this paper, we determined the optimal information block length using S/X endurance method.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.97-107
• /
• 2011

Nowadays there are a lot of issues about copyright infringement in the Internet world because the digital content on the network can be copied and delivered easily. Indeed the copied version has same quality with the original one. So, copyright owners and content provider want a powerful solution to protect their content. The popular one of the solutions was DRM (digital rights management) that is based on encryption technology and rights control. However, DRM-free service was launched after Steve Jobs who is CEO of Apple proposed a new music service paradigm without DRM, and the DRM is disappeared at the online music market. Even though the online music service decided to not equip the DRM solution, copyright owners and content providers are still searching a solution to protect their content. A solution to replace the DRM technology is digital audio watermarking technology which can embed copyright information into the music. In this paper, the author proposed a new audio watermarking algorithm with two approaches. First, the watermark information is generated by two dimensional barcode which has error correction code. So, the information can be recovered by itself if the errors fall into the range of the error tolerance. The other one is to use chirp sequence of CDMA (code division multiple access). These make the algorithm robust to the several malicious attacks. There are many 2D barcodes. Especially, QR code which is one of the matrix barcodes can express the information and the expression is freer than that of the other matrix barcodes. QR code has the square patterns with double at the three corners and these indicate the boundary of the symbol. This feature of the QR code is proper to express the watermark information. That is, because the QR code is 2D barcodes, nonlinear code and matrix code, it can be modulated to the spread spectrum and can be used for the watermarking algorithm. The proposed algorithm assigns the different spread spectrum sequences to the individual users respectively. In the case that the assigned code sequences are orthogonal, we can identify the watermark information of the individual user from an audio content. The algorithm used the Walsh code as an orthogonal code. The watermark information is rearranged to the 1D sequence from 2D barcode and modulated by the Walsh code. The modulated watermark information is embedded into the DCT (discrete cosine transform) domain of the original audio content. For the performance evaluation, I used 3 audio samples, "Amazing Grace", "Oh! Carol" and "Take me home country roads", The attacks for the robustness test were MP3 compression, echo attack, and sub woofer boost. The MP3 compression was performed by a tool of Cool Edit Pro 2.0. The specification of MP3 was CBR(Constant Bit Rate) 128kbps, 44,100Hz, and stereo. The echo attack had the echo with initial volume 70%, decay 75%, and delay 100msec. The sub woofer boost attack was a modification attack of low frequency part in the Fourier coefficients. The test results showed the proposed algorithm is robust to the attacks. In the MP3 attack, the strength of the watermark information is not affected, and then the watermark can be detected from all of the sample audios. In the sub woofer boost attack, the watermark was detected when the strength is 0.3. Also, in the case of echo attack, the watermark can be identified if the strength is greater and equal than 0.5.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.191-194
• /
• 1998

본 논문에서는 OFDM 시스템에서 사용되는 부 반송파의 수와 동일한 길이의 complementary code를 사용하여 각 부 반송파 데이터를 frequency 영역에서 scrambling하는 PAPR 감소 방안을 제안한다. 이 방법은 부 반송파의 수와 동일한 길이의 complementary code 집합을 이용하여 주어진 데이터에 부과해서 PAPR 값이 가장 적은 complementary code를 사용하여 scrambled된 데이터를 송신함으로서 PAPR 값을 감소시키는 방법이다. 수신기에서의 복호를 위하여 Nc개의 complementary code에 해당하는 log2Nc 비트의 code 인덱스를 데이터와 함께 전송한다. 이때 code 인덱스 비트가 PAPR 값에 영향을 주지 않도록 하기 위하여 CODE인덱스와 데이터가 함께 complementary code로 scrambling되어진다. 제안된 이 방법을 사용하면 주파수 대역효율을 높이면서 PAPR 값을 크게 줄일 수 있다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.1-10
• /
• 1997

In this paper, an improved lower bound on the burst-error correcting capability of th ecyclic product code is presented and through the analysis of this new bound clustered cyclic product (CCP abbr.)code is proposed. The CCP code, to improve the burst-error correcting capability, combines the idea of clustering and the transmission method of cyclic product code. That is, a cluster which is defined in this paper as a group of consecutive code symbols is employed as a new transmission unit to the code array transmission of cyclic product code. the burst-error correcting capability of the CCP code is improved without a loss in the random-error correcting capability and performance comparison in the digital video camera records (DVCR) system shows the superiority of the proposed CCP code over conventional product codes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.10-15
• /
• 2010

Good performance of spectral-amplitude-coding optical CDMA can be obtained using codes based upon Hadamard matrices, but Hadamard codes have very restrictive code lengths of $2^n$. In this paper a new code family, namely extended Hadamard code, is proposed to relax the code length restriction and the number of simultaneous users. The improved performance of the proposed system is analysed with the consideration of phase-induced intensity noise(PIIN).